iFi audio Zen Can Signature Set HFM User Manual
- October 26, 2023
- iFi Audio
Table of Contents
Signature Set HFM
User Manual
Zen Can Signature Set HFM
Cat Fans: Vet Approved Facts & ...
Cat Fans: Vet Approved Facts & Safety Tips
Thank you for purchasing the CAN Signature from the ZEN series.
The ZEN CAN Signature HFM is a balanced headphone amplifier optimized for
HIFIMAN headphones.
-
Power switch
-
Input channel switch
Input 1: RCA
Input 2: Single-ended 3.5mm
Input 3: Balanced 4.4mm -
PowerMatch selection: 0dB/6dB/12dB/18dB
We recommend starting from 0dB and then increasing the switchable gain level to attain an enjoyable and comfortable level of volume from the headphones.
Warning: at the outset do not use excessive gain, otherwise, damage to hearing or connected headphones may ensue. AMR/iFi audio is not responsible for any damage/injury from misuse. -
Analogue Volume Control
At normal listening levels, the volume control should be around the 12 o’clock position. Increase the gain level to enjoy a higher listening level. -
Single-ended 6.3mm output
For connecting single-ended 6.3mm headphones. With single-ended 3.5mm headphones, connect with a 3.5mm to 6.3mm adapter. -
Balanced 4.4mm analogue output
For connecting balanced 4.4mm headphones.
Tip: When using HIFIMAN headphones with a balanced design, we recommend using a 4.4mm balanced output. -
HFM
Headphone corrections optimized for HIFIMAN headphones. -
space Matrix LED
The space Matrix(on/off ) recreates a holographic sound field.
It is a pure analogue signal processing circuit designed for listening to headphones as if one was listening to speakers. This addresses the ‘music inside the head’ sensation, which makes for unsettling listening.
Tip: Sonically-hindering DSP is NOT used for HIFIMAN nor XSpace Matrix systems. They use the highest-quality discrete components and operate purely in the analogue domain. Hence all the clarity and resolution of the original music is retained. -
Settings This button chooses between:
– Off
– HFM
– space
-
Balanced 4.4mm analogue input This is a balanced analogue input.
-
Single-ended 3.5mm analogue input For connecting single-ended 3.5mm input.
-
RCA analogue input This is an analogue input.
-
Balanced 4.4mm analogue output This is an analogue output via 4.4mm > XLR or other balanced interconnects. You could use this for an active speaker.
Tip: As the ZEN CAN Signature HFM is balanced, this is the recommended output. -
Balanced 4.4mm analogue output
This is an analogue output via 4.4mm > XLR or other balanced interconnects. You could use this for an active speaker.
Tip: As the ZEN CAN Signature HFM is balanced, this is the recommended output.
Specifications
| Input voltage: | DC 5V/2.5A |
|---|---|
| Max Output: | |
| Balanced: | >15.1V/385 mW (@ 600 Ohm) |
11.0V/1890 mW (@ 64 Ohm)
6.2V/1200 mW (@ 32 Ohm)
S-E:| >7.6V/98 mW (@ 600 Ohm)
7.4V/870 mW (@ 64 Ohm)
7.2V/1600 mW (@ 32Ohm)
THD & N:|
Balanced:| <0.006% (@ 360 mW/2.4V 16 Ohm)
S-E:| <0.005% (@ 100 mW/1.27V 16 Ohm)
SNR:|
Balanced:| >121dBA (@ 15.2V)
S-E:| >120dBA (@ 7.6V)
Max. Input:|
Balanced:| 7.4V RMS
RCA:| 3.8V RMS
3.5mm:| 1.92V RMS
Gain:| 0dB, 6dB, 12dB and 18dB
Frequency Response:| 10Hz – 200kHz (-3dB)
Power consumption:| No Signal ~5W Max Signal ~12W
Dimensions:| 158 x 117 x 35 mm 6.2″ x 4.6″ x 1.4″
Net weight:| 550 g (1.21 Ibs)
Warranty period:| 12 months
Specifications are subject to change without notice.
Ver1.2
ifi-audio.com