TOPENS DPS180-U AC-DC Power Supply User Manual
- June 4, 2024
- Topens
Table of Contents
User Manual of the AC-DC Power Supply
Model: DPS180-U
Thank you for your purchasing of the 24VDC 150W AC-DC power supply. The AC-DC power supply can be used as a power source for the OPENS swing gate opener as well as the other 24VDC electrical appliance. The wire connection is very convenient because of the plug & play design.
Specifications:
Input: 100-240V~ 50/60Hz Rated output voltage: 24VDC
Rated power: 150W Peak power: 180W IP degree: IP65
Features:
Over-load protection, Over-current protection, Short circuit protection, Over- heat protection
Wire Connection of the Power Supply
Firstly please connect the output of the power supply to the electrical
appliance. It can be wired to the OPENS swing gate opener by plugging the
output wire to the control box. Please note that the polarity must be
connected correctly or it may damage the control board (Red wire is positive
and yellow wire is negative). You can attach it to the gate opener refers to
the wiring diagram in the user manual of the gate opener. Finally, plug the AC
cable to the AC main socket to power on the power supply.
NOTE: The DPS180-U power supply is used to replace the batteries when
it’s used for OPENS gate opener. You should attach it to the +BAT- terminals
of the control board directly and you can’t connect the batteries to the +BAT-
terminals at the same time. NOTE: Always ask the help of a professional
technician /electrician if you have any questions.
http://www.topens.com
OPENS Website
www.topens.com
Any questions, please do not hesitate to contact us:
E-mail:[email protected]
Kindly include your Product Model, Purchasing Date & Site, Order #, and
your contact
information. All your concerns will be replied to within 24 hours.
Tel: +1 (888) 750 9899 (Toll Free USA & Canada)
C030474 VER21a
Documents / Resources
|
TOPENS DPS180-U AC-DC Power
Supply
[pdf] User Manual
DPS180-U AC-DC Power Supply, DPS180-U, AC-DC Power Supply, Power Supply
---|---