EATON DG321UGB General Duty Non-Fusible Safety Switch Instructions
- June 3, 2024
- EATON
Table of Contents
EATON DG321UGB General Duty Non-Fusible Safety Switch
Eaton General duty non-fusible safety switch, single-throw, 30 A, NEMA 1, Indoor, Painted steel, Three-pole, Three-wire, 240 V
General specifications
- Product Name: Eaton general duty non-fusible safety switch
- Product Length/Depth: 6.88 in
- Product Width: 6.38 in
- Catalog Number: DG321UGB
- UPC: 782113120140
- Product Height: 10.69 in
- Product: Weight6 lb
- Certifications: UL Listed
Catalog Notes
WARNING! The switch is not approved for service entrance unless a neutral kit is installed.
Warranty
Eaton Selling Policy 25-000, one (1) year from the date of installation of the Product or eighteen (18) months from the date of shipment of the Product, whichever occurs first.
defaultTaxonomyAttributeLabel
- Product Category: General duty safety switch
- Enclosure material: Painted steel
- Type: Non-fusible, single-throw
- Fuse configuration Non-fusible
- Number of wires 3
- Enclosure NEMA 1
- Voltage rating 240V
- Amperage Rating 3 0A
- Number Of Poles Three-pole
Resources
- Catalogs
- Eaton’s Volume 2—Commercial Distribution
- Multimedia
- Double Up on Safety
- Switching Devices Flex Center
- Specifications and datasheets
- Eaton Specification Sheet – DG321UGB
- Eaton Corporation plc Eaton House30 Pembroke Road Dublin 4, IrelandEaton.com
- © 2022 Eaton All Rights Reserved Eaton is a registered trademark. All other trademarks are the property of their respective owners.
- Eaton.com/socialmedia
Documents / Resources
|
EATON DG321UGB General Duty Non-Fusible Safety
Switch
[pdf] Instructions
DG321UGB General Duty Non-Fusible Safety Switch, DG321UGB, General Duty Non-
Fusible Safety Switch, Duty Non-Fusible Safety Switch, Non-Fusible Safety
Switch, Fusible Safety Switch, Switch
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>