Electro-Voice ELX200-12P 12″ 2-Way Powered Speaker User Guide

June 7, 2024
Electro-Voice

Electro-Voice logo ELX200-12P 12″ 2-Way Powered
Speaker

Electro-Voice ELX200-12P 12

  • EV Quick Smart Mobile application: quickly and wirelessly configure, control and monitor up to six ELX200 loudspeakers simultaneously, and
    receive immediate notification during critical performance conditions. Bluetooth® is available in select countries.

  • Quick Smart DSP features best-in-class processing. Easy setup via four presets, sub/top system-match, three-band EQ, five user-programmable presets, visual monitoring of limiter status, input level control and meters, and master volume control to optimize gain structure, all via LCD.

  • High-efficiency 1200 W Class-D power amplifier delivers up to 130 dB peak SPL utilizing transducers designed and engineered by EV.

  • EV-patented Signal Synchronized Transducers (SST) waveguide design provides precise and consistent coverage, minimal distortion, and maximized acoustical loading.

  • Professional-grade hardware: three M10 threaded mounting points for forged eyebolts, integrated pole-mounts, and the proven ZLX three-handle design for easy lifting.

ELX200-12P features high-efficiency Class-D power amplifiers (up to 1200 W) with integrated Quick Smart DSP and delivers up to 130 dB SPL utilizing transducers designed and engineered by EV (12-inch EVS-12M woofer coupled with a DH-1C 1-inch titanium compression driver). Powered full-range models allow easy setup via four presets (Music, Live, Speech, Club), sub/top system-match crossovers, three-band EQ, five user-programmable presets (Store and Recall settings), visual monitoring of limiter status, input level control and meters, and master volume control to ensure optimal gain structure. ELX200 powered models are ideal for portable and installed applications, with lightweight and durable polypropylene enclosures, three M10 threaded mounting points and the proven ZLX handle design for easy lifting.
The new QuickSmart Mobile wireless control and monitoring application, using Bluetooth® Low Energy (BTLE) technology, allows intuitive system control, configuration, and monitoring of up to six powered ELX200 loudspeakers simultaneously. Receive alerts when your system is being overdriven, and control your system while in front of your speakers, not behind.
Bluetooth® is available in select countries.

**System overview

Electro-Voice ELX200-12P 12 -
overview**

Full-Range loudspeaker amplifier panel:

  1. LCD – DSP control and monitoring interface.

  2. MASTER VOL – Adjusts the sound level.
    DSP – Scroll through the menu and select the available choices. Push the MASTER VOL knob to enter the DSP menu.

  3. INPUT LEVEL – Level control for adjusting the individual inputs’ level. The 12 o’clock position is unity gain (no gain or attenuation), the range to the left of zero (0) is for adjusting line-level sources, and the range to the right of zero (0) is for adjusting microphone levels. LINE and MIC
    input level control is available for both INPUT 1 and INPUT 2.

  4. INPUT – Balanced input for the connection of signal sources like mixing consoles, instruments, or microphones. Connections can be established using ¼ inch TRS or XLR connectors.

  5. POWER – AC switch for switching the power ON or OFF. The LCD screen lights up when the power is turned ON, after approximately 3 seconds.

  6. MAINS IN – AC connection is established via an IEC connector.
    7. OUTPUT – XLR output sends the mix of both input signals to another loudspeaker or subwoofer. INPUT LEVEL controls the signal level to
    OUTPUT.
    The MASTER VOL or DSP control settings do not affect OUTPUT.

  7. AUX INPUT – Stereo unbalanced RCA inputs for connecting external audio media devices, such as MP3 players. Both RCA inputs are summed and can be controlled with INPUT 1 level. The inputs can be used simultaneously with XLR/TRS INPUT 1.

For more information, see ELX200 Powered
Loudspeakers Installation manual (F.01U.326.891).
Dimensions:

Electro-Voice ELX200-12P 12 - overview1

Notice
Electro-Voice loudspeakers and rigging accessories should be suspended overhead only in accordance with the procedures and limitations specified in the user documentation and installation manual. Electro-Voice products should be suspended with certified rigging hardware by an authorized rigging professional and in complete compliance with local, state, and federal overhead suspension ordinances.

Technical specifications

Frequency response (-3 dB)¹ 57 Hz – 16 kHz
Frequency range (-10 dB)¹ 51 Hz – 20 kHz
Maximum SPL² 130 dB
Coverage (H x V) 90˚ x 60˚
Power rating: 1200 W
LF transducer EVS-12M 300 mm (10 in)
HF transducer DH-1L 1-inch titanium compression driver
Crossover frequency 1700 Hz
Connectors (1) Stereo RCA Input, (2) XLR/TRS combo jack, and (1) XLR
Enclosure Polypropylene
Grille 18 AWG steel with powder coat
Suspension (3) M10 suspension points
Color Black or white
Dimensions (H x W x D) 629 mm x 363 mm x 344 mm

(24.8 in x 14.3 in x 13.6 in)
Net weight| 15.6 kg (34.4 lb)
Shipping weight| 17.7 kg (39.1 lb)
Power consumption³| 100 – 240 V~, 50 – 60 Hz, 1.8A

Frequency response:

Electro-Voice ELX200-12P 12 - Frequency

Ordering information

ELX200-12P-US 12″ 2-way powered speaker, US cord
Powered 12-inch 2-way loudspeaker US cord, black
Order number ELX200-12P-US | F.01U.326.040
ELX200-12P-EU 12″ 2-way powered speaker, EU cord
Powered 12-inch 2-way loudspeaker EU cord, black
Order number ELX200-12P-EU | F.01U.326.044
ELX200-12P-AP 12″ 2-way powered speaker, AP
Powered 12-inch 2-way loudspeaker Asia-Pacific regions, black
Order number ELX200-12P-AP | F.01U.326.047
ELX200-12P-GL 12″ 2-way powered speaker, Global, No BT
Powered 12-inch 2-way loudspeaker, two cords, No Bluetooth®, black
Order number ELX200-12P-GL | F.01U.334.024
ELX200-12P-W 12″ 2-way powered speaker, white
12″ 2-way powered speaker, white
Order number ELX200-12P-W | F.01U.361.352
Accessories
EBK1-M10-3PACK Forged M10 3pack short shank eyebolt kit
Forged M10 short shank eyebolt kit for ELX10/10P, ELX 12/12P, and ELX 15/15P, 3-pack, silver
Order number EBK1-M10-3PACK | F.01U.327.889
ELX200-12-CVR Padded cover for ELX200-12, 12P
Padded cover for ELX200-12/12P, black
Order number ELX200-12-CVR | F.01U.326.066
ELX200-BRKT Wall mount bracket, ELX200 2-way, black
Wall mount bracket for all ELX200 full-range models, black
Order number ELX200-BRKT | F.01U.326.072
ELX200-BRKT-W Wall mount bracket, ELX200 2-way, white

Wall mount bracket for all ELX200 full-range models, white
Order number ELX200-BRKT-W | F.01U.361.514

Represented by:
Germany:
Bosch Sicherheitssysteme GmbH
Robert-Bosch-Ring 5
85630 Grasbrunn
Germany
www.electrovoice.com

Electro-Voice logo

Bosch Security Systems, LLC
12000 Portland Avenue South
Burnsville MN 55337
USA
© Bosch Security Systems2021
Data subject to change without notice
F.01U.326.901 | 202107271159 | V3 | July 27, 2021

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Electro-Voice User Manuals

Related Manuals