Ultron GN-IT01 Portable Rechargeable Blender User Guide

June 7, 2024
Ultron

Ultron GN-IT01 Portable Rechargeable Blender User Guide

Ultron GN-IT01 Portable Rechargeable Blender

Focus on the technology of blending and juicing

Please read the instruction manual before using.

Using safety

WARNING
It will be dangerous if this instruction manual isn’t followed

FIG 1 Using safety

*Please be careful when cleaning.The blades are very sharp

QUESTION

FIG 2 QUESTION

1. PARTS NAME

FIG 3 PARTS NAME

Indicating light explanation

FIG 4 Indicating light explanation

IMPORTANT!

  1. 1.There will be a tolerance for the glass bottle due to special process, if your glass bottle leak or screw loose, please unscrew the bottle and reverse installation.
  2. It is best to charge the machine for between 3-5 hours.
  3. The best blending performance is 100g food+200g liquid ( 10%).

2. OPERATION

FIG 5 OPERATION

  1. Cut food to several pieces, remove the skin and nut ( around 1.5-2.0cm). Pour water and milk into the container.

FIG 6 OPERATION

2. Incline the machine to the angle of 45°,and then start the machine by pressing the switch for 2 seconds.

FIG 7 OPERATION

3. Upside down the blender and shake the bottle gently to make it more delicious. The blender will stop after 45s.

NEW function:

FIG 8 OPERATION

1. Ready 40-45g ice cube (around 1.5-2.5cm length/width/ height). Put the ice cube into the container.

FIG 9 OPERATION

2. Incline the machine to the angle of 45°,and then start the machine by pressing the switch twice continuously.

FIG 10 OPERATION

3. Upside down the blender and shake the bottle gently to make it more delicious. The blender will stop after 45s.

*EASY INSTALLATION

  1. Put the jug on the main base, and then turn clockwise fully to lock.
  2. Connect the main base to the battery set. (Press the switch button to operate with white light).
  3. Put the whole machine on the base.

3. CHARGING

Battery capacity is 1200mAh x2,please use USB wire for charging connected to an adapter(2A or below 2A), power bank, USB port of computer or car charging port.

CHARGING PHOTO: (Magnetic Charging)

FIG 12 CHARGING PHOTO

  1. Please connect the magnetic suction port of the USB wire to the magnetic suction port on the base.
  2. Please insert “USB side”(bigger side of USB wire) into adapter,power bank,USB port of computer and etc.

NOTICE:
The red light indicates the machine is charging.When charging is completed,the light will turn white. The machine will not work during charging.

4. FAULT

FIG 13 FAULT

WARM REMIND:

  1. The machine should only be used when water,milk or other liquids are inside the container at a height above and covering
  2. Do not wash the base of the machine with water.Do not submerge the base in water.If water is allowed into the switch or the blades.If food does not blend,add more liquid. charging port,the machine will be damaged.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals