JAMESON JA Pruners with Adapter User Guide
- June 7, 2024
- JAMESON
Table of Contents
Since 1956
Pruners – Fiberglass Poles – Pole Saws
JA Pruners with Adapter
Adapters Allow Quick and Easy Replacement of
Pruner Head or Pole Saw
WARNING
HOLD PRUNER BY BASE – NOT BLADE OR HOOK
Attach Adapter
Remove the bolt from Pruner.
Insert Adapter, lining up holes on
Adapter with bolt holes on Pruner.
Insert the bolt and tighten.
Attach Rope
JA-14 Fixed Pulley Pruner
JA-14S Swivel Pulley Pruner
JA-34 Big Mouth Pruner
Thread rope end over pulley and tie to an eyebolt on Adapter.
JA-14DP Double Pulley Pruner
JA-34DP Double Pulley Big Mouth Pruner
Thread rope over an upper pulley, thread under lower pulley on adapter and tie
end to upper pulley.
Care For Pruner
Wipe down after use to remove moisture and tree sap.
Lubricate to repel moisture and prevent rust.
PH Pruners with Adapter
Adapters Allow Quick and Easy Replacement of Pruner Head or Pole Saw
WARNING
HOLD PRUNER BY BASE – NOT BLADE OR HOOK
POLE SAWS
Adapters Allow Quick and Easy Replacement of Pruner Head or Pole Saw
Attach Saw Blade to Pole Saw Head
Care For Saw Blades
Wipe down after use to remove moisture and tree sap.
Lubricate to repel moisture and prevent rust.
Fiberglass Poles
With Leaf Spring Ferrules
Connecting Poles or Attaching Tool Heads
Lift leaf spring on pole’s female ferrule to allow male pole ferrule or tool
head adapter to be inserted. Align holes and drop leaf spring’s button back
into hole for a secure connection.
For Your Safety And Best Results, Jameson Recommends:
Use only Jameson attachments with Jameson poles.
Always start with a Jameson Base Pole.
Connect Extension Pole to Base Pole.
Connect Pole Saw Head or Pruner Head to Extension Pole.
For shorter lengths, use Base Pole only with Pole Saw Head or Pruner Head.
Double Lock™ Telescoping Poles
WARNING
Pole Must Be Locked Into Position Before Using
Fig. 2
Scan to
Watch
Double Lock™ Video
http://www.youtube.com/watch?v=XXg054-vCbU
To Adjust Pole Length:
Unscrew threaded collar by turning until loose. (Fig. 1)
Unlock the inner lock by twisting the upper pole section counter-clockwise,
approximately
quarter-turn, while holding the lower pole section in place. (Fig. 2)
Extend poles to the desired length.
To Lock Into Position:
Twist upper pole section clockwise, approximately quarter-turn, until the
inner lock engages (there is an audible click).
Re-attach collar to outer lock, turning until completely secure.
Pruners & Pole Saws
Permanent Mount – No Adapter
WARNING
HOLD PRUNER BY BASE – NOT BLADE OR HOOK
Attach Rope
JAPruners Permanently Mounted To Pole
Thread rope end over pulley and tie to an eyebolt on Adapter.
Attach Saw Blade
Pole Saw Heads Permanently Mounted To Pole
Wing Nut
Lock Washer
Replace lock washer and wing nut, tighten.
Care For Pruner and Saw Blades
Wipe down after use to remove moisture and tree sap.
Lubricate to repel moisture and prevent rust.
Warranty
Jameson products carry a warranty against any defect in material and
workmanship for a period of one year from date of shipment unless
failure is due to misuse or improper application.
Jameson shall in no event be responsible or liable for modifications,
alterations, misapplications or repairs made to its products by purchaser or
others.
This warranty is limited to the repair or replacement of the product and does
not include reimbursement for shipping or other expenses incurred.
Jameson disclaims any other express or implied warranty.
TR_MO2
800.346.1956
WWW.JAMESONLLC.COM
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>