Zilan ZLN2099 Vacuum Cleaner Instruction Manual

Vacuum Cleaner
ZLN2099
INSTRUCTION MANUAL
140 watt
220-240 Volt
50/60 Hz

www.zilan.com.tr

| |

DESCRIPTION

A Accesories:
A-1 Lance and multiuse brush
A-3 Extralong lance
B Extension tube
C Motorized turbo brush
E Filter
F Battery indicator
G ON/OFF button
H Body
I Dust tank
J Lithium batteries
K Wall bracket
L Power supply

If the model of your appliance does not have the accessories described above, they can also be bought separately from the Technical Assistance Service.

USE AND CARE:

• Do not use the appliance without its filter(s) correctly in place.
• Do not use the appliance if its accessories are not properly fitted.
• Do not use the appliance to gather up water or any other liquid.
• Do not use the appliance if the on/off switch does not work.
• Store this appliance out of reach of children and/or persons with physical, sensory or reduced mental or lack of experience and
• Do not work on areas where there are metal objects, such as nails and/or screws.
• Never vacuum hot or sharp objects (cigarette butts, ashes, nails, etc.).
• Do not open the battery/ies under any circum­stances whatsoever.
• The battery/ies should be stored at a tempera­ture of below 40°C.
• Only use the appliance for carrying out dry
• Do not use the appliance on any part of the body of a person or animal.
• Recharge the battery/is only with the charger supplied by the manufacturer. A charger that is suitable for one type of battery may cause an explosion or fire hazard when used with other batteries/ies.
• Use the device only with the battery/ies for which has been specifically designed. The use of any other battery/ies s can cause an explo­sion or fire hazard.

INSTALLATION

• Be sure to remove all packaging material from inside the appliance.

ASSEMBLING THE WALL BRACKET:

• The appliance has a wall bracket (K) which must be fixed to the wall.
• Fix the wall bracket as you think appropriate, using plugs, screws, and adhesive…
• Make sure that the bracket is firmly fixed; it should be able to support twice the weight of the appliance.
• Fit the appliance into the wall support.

CHARGING THE BATTERY

• Caution: A new battery is not fully charged and must therefore be charged before the appli­ance is used for the first time.
• Charge the battery at an atmospheric tempera­ture of between 4 and 40°C.
• Plug the charger ( L ) into the mains.
• A pilot light will come on to indicate that the charger is ready to begin charging the battery.
• Approximately 4 to 5 hours are needed for a complete charge of the battery. Never attempt to over-charge the battery (although it is rec­ommended that the first charge of the battery is of 6 hours in duration).
• Insert the battery into the charger.
• Connect the charger (L) to the jack using the socket on the appliance. The socket is located at the lower/back part of the appliance.
• The pilot light will come on to indicate that the charger is charging the battery.
• At the end of the time period specified above, remove the battery from the charger.
• When the battery is charged disconnect the charger from the mains supply.
• NB: Do not use the appliance while it is connected to the charger.

HOW TO CHECK THE BATTERY’S CHARGE LEVEL:

• Press the ON/OFF button in order to see the battery indicator lights.
• If no pilot light lights up, this means that the battery is completely flat.
• NB: For long battery life, it is advisable to charge the battery, only, when it has run out completely.

INSTRUCTIONS FOR USE BEFORE USE:

• Make sure that the product’s packaging has been removed.
• Before using this product for the first time, it is important to make a full charge of batteries.
• Prepare the appliance according to the function you wish to use:

VACUUMING FUNCTION: USE:

• Turn the appliance on, by using the on/off button.
• Select the desired speed.

VACUUM:

• The hand vacuum is designed in such a way that it allows the following accessories to be fitted: (use the combination that best meets your requirements). (Fig.1).
• Furniture brush: Equipped with a brush at the end, which brushes the surface as it is used.—Crevice nozzle: Specially designed for getting into cracks and difficult corners.

ONCE YOU HAVE FINISHED USING THE APPLIANCE:

• Turn the appliance off using the on/off button.
• Clean the appliance.

CLEANING

• Disconnect the battery charger from the mains and allow it to cool before undertaking any cleaning task.
• Clean the equipment with a damp cloth with a few drops of washing-up liquid and then dry.
• Do not use solvents, or products with an acid or base pH such as bleach, or abrasive products, for cleaning the appliance.
• Never submerge the appliance in water or any other liquid or place it under running water.

EMPTYING THE DUST BOX

• Empty the dust box when it is full (observation facilitated by transparent windows), or when vacuuming power is notably reduced.
• Disconnect the accessories from the vacuum cleaner’s air intake. (Fig.2).
• Open the lid of the dust box and empty the contents into the appropriate waste disposal
• Close the lid of the dust box.

CHANGING THE FILTERS:

• Motor filter, it is advisable to be changed at least once a year or every 100 hours of the appliance’s use.

TO REMOVE THE FILTERS:

• Remove the dust tank pulling out without press­ing any button. (Fig.3)
• Remove the filter from its housing (Fig.4).
• To reassemble the filter, proceed with the above instructions, in reverse order.
• Engage the dust tank in the vacuum cleaner. (Fig.5)

CLEANING THE ROTARY BRUSH:

• To remove the brush:
• Turn the rotating button on the bottom of the fitting to the left in order to release the brush. (Fig.6).
• Remove the brush and clean.
• To reassemble, follow the above instructions but in reverse.

SUPPLIES

• Supplies can be acquired from distributors and authorized establishments (such as filters, ..) for your appliance model.
• Always use original supplies, designed specifi­cally for your appliance model.
• These supplies are available in specialist

HOW TO REMOVE THE BATTERIES FROM THE INTERIOR OF THE DEVICE:

• CAUTION: It is important that the batteries are fully discharged prior to its withdrawal from the
• CAUTION: The appliance must be disconnect­ed from the supply mains when removing the

TO REMOVE THE BATTERIES, ONCE THE LIFE OF THE APPLIANCE, PROCEED AS FOLLOWS:

• Open the top shell of the apparatus, removing previously with the help of a screwdriver fixing screws (Fig.7).
• Safely remove the battery from its housing.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>