Pro-Ject BT Box E Amplifier with Bluetooth Instructions

INSTRUCTIONS FOR USE
Pro-Ject BT Box E

Dear music lover, thank you for purchasing a Pro-Ject Audio Systems BT Box E.
In order to achieve maximum performance and reliability, you should study these instructions for use carefully.
Warning of a hazard for the user, the unit or possible misuse.
Important notice.

Safety instructions

AC outlet voltages vary from country to country. Before connecting to the mains, make sure that the voltage in your area meets the voltage requirements printed on the power supply.
The power supply is used to disconnect the unit from the mains. Make sure that the power supply is easily accessible at all times. Never handle the device, the power supply while your hands are wet or damp. Avoid letting liquids enter the device or the power supply. Never place any item containing liquid, such as a flower vase on or near the device. Never spill any liquid on the device or the power supply. Never place any naked flame sources, such as lighted candles on or near the device. The product shall not be used in damp or wet locations, next to a bathtub, sink, swimming pool or any other similar conditions.

Connectors

Make all connections whilst the product is disconnected from the power supply.
Take care to connect the left and right channels correctly. The right channel is usually marked red, the left channel black or white.
Never use any other power supply than the one supplied with the unit.
Never connect or disconnect the power supply to or from the unit whilst the power supply is connected to the mains.
Connection to the amplifier
Connect the Analog Out socket to line input (such as AUX) on your amplifier. Alternatively, you can use also digital Optical Out to connect the unit to a D/A converter or to the digital input of your amplifier or AVR. Only one output is active at a time, use the small switch to select digital or analog output.
Mains power connection
Connect the low voltage plug from the power supply to the Power 9V DC socket before connecting the power supply to the mains.

BT pairing

Pairing with devices with Android OS Open Settings and tap on BT. Turn on BT and tap on Scan. Searched devices will show up. Tap on “BT Box E” (Confirm pairing code if requested). Once paired it will show “Connected to media Audio”, now you can play music from your Android device over BT to BT Box E.
Pairing with Apple devices
Tap on Settings, tap on BT, turn on BT, your device will automatically start searching for available devices. Tap on “BT Box E” and it will be connected to the BT Box E. Now you can play music.
It´s possible to use BT Box E also with other than the above-mentioned devices, the pairing procedure is always similar.
Reconnecting
If you move out of range or turn off BT, BT Box E will disconnect from your device. To reconnect simply open the BT manager and tap on “BT Box E”. If the signal is lost for only a few seconds it can reconnect automatically  – typically if you move out of the range and then return back.

Adding a new phone or tablet
The unit can play music from one device at a time, but it is capable of being paired to up to 8 devices. If you want to switch from one device to another, you have to disconnect the existing connection to BT Box E and then follow the steps for pairing with the new device.

Troubleshooting

No music from speakers:
– make sure the BT Box E is powered
– make sure an audio cable or an optical cable is correctly connected to BT Box E
– make sure you are within the range
– make sure the BT is enabled and the device is connected to BT Box E. Volume level is properly set

Technical specifications Pro-Ject BT Box E

Service

Should you encounter a problem which you are not able to alleviate or identify despite the above information, please contact your dealer for further advice. Only if the problem cannot be resolved there, the unit should be sent to the responsible distributor in your country.
Warranty
The manufacturer accepts no responsibility for damage caused by not adhering to these instructions for use. Modification or changes to any part of the product by unauthorized persons release the manufacturer from any liability over and above the lawful rights of the customer.
Copyright, trademarks
Pro-Ject Audio Systems is a registered Trademark of H. Lichtenegger.
This guide was produced by: Pro-Ject Audio Systems Copyright© 2019. All rights reserved.
The information was correct at the time of going to press. The manufacturer reserves the right to make changes to the technical specification without prior notice as deemed necessary to uphold the ongoing process of technical development.
BT® is a trademark owned by BT SIG, Inc., Microsoft®, Windows®, are either registered trademarks or trademarks of Microsoft Corporation, Apple is registered trademark of Apple Inc., Android™ is a trademark of Google Inc.
Waste from Electrical and Electronic Equipment (WEEE): This directive mandates the collection and recycling of electronics and component materials in order to reduce the amount going to landfills. Outside North America, when the user decides to discard this product, it must be sent to a separate collection facility for recycling. Please contact your point of purchase for more details.
Federal Communication Commission (FCC) Interference Statement FCC Part 15: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.     These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following   measures:
– Reorient or relocate the receiving antenna
– Increase the separation between the equipment and receiver
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
– Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
To maintain compliance with FCC´s RF exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
Contains FCC ID: 2ACCRMB05

Declaration of Conformity

We, Canor spol. s r.o. Družstevná 13925/39 08006 Prešov Slovakia (manufacturer) and Pro-Ject Audio Systems is a division of Audio Tuning GmbH Margaretenstrasse 98 1050 Vienna, Austria (distributor)

declare under our responsibility that the product is in conformity with the provisions of Directives:
2014/35/EU including amendments
2014/30/EU including amendments
2014/53/EU including amendments

The following harmonized standards were applied:
Health: EN62479:2010
Safety: EN60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013, EN62368-1:2014/A11:2017,
EN61558-1:2005/A1:2009, EN61558-2-16:2009/A1:2013
EMC: EN301489-1 V2.2.0: 2017-03, EN301489-17 V3.2.0:2017-03, EN55032:2015, EN55035:2017,
EN61000-3-2:2014, EN61000-3-3:2013
Radio Spectrum: EN300328 V2.1.1 (2016-11)
Pro-Ject Audio Systems a division of Audio Tuning GmbH
1050 Vienna, Austria, Margaretenstrasse 98
info@project-audio.com

© Pro-Ject Audio Systems · Pro-Ject BT Box E (9V) · Revision 22.04.2021

Documents / Resources

| Pro- Ject BT Box E Amplifier with Bluetooth [pdf] Instructions
BT Box E, Amplifier with Bluetooth
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>