NuCoat DARK TRANSFER Inkjet Transfer Paper Instructions

NuCoat DARK TRANSFER Inkjet Transfer Paper

Specifications :

• Product Name: PERMA TRANSTM DARK TRANSFER
• For: Black and Dark Colored Fabrics
• Product Code: 1654 Double Blue Line

Product Usage Instructions

Items You Will Need:

• Prewashed Cotton or Cotton/Polyester blend fabric
• Heat Press or Iron (do not use steam)
• Pillowcase
• Parchment paper
• Hard smooth surface: Do NOT use an ironing board
• Scissors

Printing Your Image:

1. Using your computer, select or design images to be transferred. Do NOT mirror or flip the image before printing.
2. Preheat your iron to the Cotton setting for 50%-100% cotton blends or the Polyester/Rayon setting for fabrics less than 50% cotton.
3. Lay a pillowcase on the ironing surface.
4. Pre-iron the fabric to release moisture and remove wrinkles.
5. Peel liner from back of printed transfer.

Washing Instructions:

• Turn the garment inside out before washing.
• Wash and dry separately from other clothes.
• Wash in COLD water at delicate setting using mild detergent.
• Avoid bleach or bleach alternative detergents.
• Dry on LOW temperature. Turn garment inside out before ironing and avoid ironing onto the transfer area.

Tips:

• Excessive stretching may damage the transfers.
• Protect transferred images from direct exposure to heat when transferring several images to the same piece of fabric.
• If image does not adhere at first, re-iron then peel the parchment cold.

FAQ:

• Q: Can I reuse the transfer sheets?
  A: No, the transfer sheets are designed for one-time use only. Reusing them may result in poor image transfer quality.

• Q: Can I use this transfer paper on white or light-colored fabrics?
  A: This specific transfer paper is recommended for black and dark-colored fabrics. For white or light-colored fabrics, consider using a transfer paper designed for light-colored fabrics for better results.

TEMS YOU WILL NEED

• Prewashed Cotton or Cotton/Polyester blend fabric
• Heat Press or Iron (do not use steam)
• Pillowcase
• Parchment paper
• Hard smooth surface: Do NOT use an ironing board
• Scissors

PRINTING YOUR IMAGE

• Using your computer, select or design images to be transferred. Do NOT mirror or flip the image before printing.
• Load transfer sheets into your printer so that the image is printed on the non-glossy (unlined) side.

Print image/design on paper using the following recommended print settings:

Trim image/design from transfer sheet to remove excess area. Round all sharp edges for better transfer performance and adhesion

TRANSFERRING THE IMAGE: HEAT PRESS

• Preheat the press to 350º F for 50%-100% cotton blends or 275º F for fabrics less than 50% cotton.
• Press the fabric for 3-5 seconds to release moisture and remove wrinkles.
• Peel the liner from the back of the printed transfer.
• Place printed transfer onto the fabric with the printed side up and cover completely with parchment paper.
• Set to 40-60 PSI or use firm pressure for best results.
• Press for 25 seconds.
• Peel COLD. Allow the transfer to cool completely, then remove parchment paper from your transfer using a smooth, even motion.

TRANSFERRING THE IMAGE IRON

• Preheat your iron to the “Cotton” setting for 50%-100% cotton blends or the “Polyester/Rayon setting for fabrics less than 50% cotton. Lay a pillowcase on the ironing surface.
• Pre-iron the fabric to release moisture and remove wrinkles.
• Peel liner from back of the printed transfer.
• Place printed transfer onto the fabric with the print side up and cover completely with parchment paper.

• Using FIRM, STEADY pressure, glide the iron in a circular motion over the entire transfer for the suggested time duration. It is important to cover the transfer completely.
  Recommended Ironing Time

  ¼ sheet| 1 minute
  ½ sheet| 2 minutes
  Full sheet| 3 minutes

• After ironing each section of the transfer, glide the iron once more over the entire transfer to heat evenly.
• Allow transfer to cool down completely, and then remove parchment paper from your transfer using a smooth, even motion.

WASHING INSTRUCTION

• Turn the garment inside out.
• Wash and dry separately from other clothes.
• Wash in COLD water at delicate setting.
• Use a mild detergent for best results.
• Do not use bleach or bleach alternative detergents.
• Dry on LOW temperature. Turn garment inside out before ironing and avoid ironing onto the transfer area.
• Remove the garment promptly from the washer.

TIPS

• Excessive stretching other than normal wear and tear may damage the transfers.
• When transferring several images to the same piece of fabric, be sure to protect transferred images from direct exposure to heat.
• If image does not adhere to fabric at first, re-iron then peel parchment cold.

This product is protected under one or more of the following patents: 9,227,461; 7,785,764; 9,718,295; 6,849,312; 9,079,681; 9,371,148 and/or 6,497,781; 6,753,050; 7,749,581; 7,754,042; 7,766,475; 7,771,554; 7,824,748; 8,197,918; 8,361,574; 8,541,071; 8,703,256; 8,826,902; 9,321,298; 9,776,389; RE41,623; RE42,541

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>