SBOX LCD2901 Swivel Wall Bracket Instruction Manual
- June 3, 2024
- SBOX
Table of Contents
SBOX LCD2901 Swivel Wall Bracket
UNPACKING INSTRUCTIONS
- Carefully open the carton, remove the contents, and lay it out on cardboard or another protective surface to avoid damage.
- Check package contents against the Supplied Parts List on the next page to assure that all components were received undamaged. Do not use damaged or defective parts.
- Carefully read all instructions before attempting installation.
IMPORTANT SAFETY INFORMATION
Install and operate this device with care. Please read this instruction before
beginning the installation, and carefully follow all instructions contained
herein. Use proper safety equipment during installation. Please call a
qualified installation contractor for help if you:
- If you don’t understand these directions or have any doubts about the safety of the installation.
- If you are uncertain about the nature of your wall, consult a qualified installation contractor.
Do not use this product for any purpose or in any configuration not explicitly specified in this instruction. We hereby disclaim any and all liability for injury or damage arising from incorrect assembly, incorrect mounting, or incorrect use of this product.
Supplied Parts List
CAUTION!
This TV mount must be securely attached to the vertical wall. If the mount
is not properly installed it may fall, resulting in possible injury and/or
damage.
- Tools Required
- 3.8mm Drill Bit
- Phillips Screwdriver
- 8mm Masonry Bit
- Carpenter’s Level
Note
The mounting components and hardware supplied in this package are not designed
for installations to walls with steel studs or to cinder block walls. If the
hardware you need for your installation is not included, please consult your
local hardware store for proper mounting hardware for the application.
Step 1
Mounting the Wall Plate to the Wall
Wood Mount
Step 2
Mounting the VESA 200 Plate to a TV
Step 3
Attaching TV to Wall Plate
Step 4
Leveling Mount
You can re-level the mount after the mount has been installed on the wall.
Leveling is achieved by rotating the front plate the TV sits on, just hold the
TV and do the adjustment.
Thanks for choosing our products, enjoy using them.