SBOX EB-TWS538 Bluetooth Earbuds User Manual
- June 13, 2024
- SBOX
Table of Contents
SBOX EB-TWS538 Bluetooth Earbuds
PRODUCT INFORMATION
MODEL NO.: TWS-538 BLUETOOTH EARBUDS
FEATURES
- Matching mode: automatic matching
- Power-on prompt: power-on.
- Power off prompt: power off.
- Pairing status: bluetooth connected
- Connection status: bluetooth is connected
- Low power hint: low power.
Key functions:
- Power on : Long press 3 seconds to turn on
- Power off: Long press 5 seconds to turn off
- Pause/play: Tap left/right earbuds
- Answer/Hang up the call : Tap left/right earbuds
- Reject: Long press left or right earbuds for 2 seconds
- Previous song: Double tap left earbuds
- Next song: Double-tap right earbuds
- Volume +: Tap left earbuds three times
- Volume -: Tap right earbuds three times
- Voice assistant: Long press left or right earbuds for 2 seconds
- Unconnected standby : automatically shuts down after 3 minutes.
LED:
-
When charging the earbuds:
The earbuds will flash a red light, and when fully charged, the blue light, after a while the light turns off. The charging will flash a green light. -
When charging the charging case:
The charging case will flash a red light when fully charged, the light is steady on. -
Paring:
When pairing, earbuds will flash red and blue, when pairing successfully, one earbud will flash red and blue light, and another will turn off.
Operating instructions
- Special note: if you use the headset for the first time or use it again after 1 hour, you need to take out the headset and put it back The charging warehouse wakes up the earphone, realizing the function of earphone automatically starting; The earphones are ready by the time they leave the factory Ear matching. If the left and right ears cannot form a team, please follow the following steps:
- Steps : turn on both earphones at the same time. The red and blue lights flicker alternately for about 5 seconds Move the left and right earphones to connect, TWS team successfully. When the time to play the mobile phone bluetooth can be paired to a search connection, after the successful pairing of the headset, the project will not flash mode.
- Operation steps for the use of one earphone : take out any earphone from the charging warehouse and turn it on. The red and blue lights will flicker alternately. At this time, turn on the phone’s bluetooth to pair the search connection.
- Call voice assistant: after the headset is connected to the standby process, long press for 2 seconds to release the hand to wake up the voice assistant (SURI) function;
- Master-slave switching operation : after the TWS is connected, it can be used independently regardless of the main and secondary connections (if one headset is without electricity or charging state, the normal use of the other headset will not be affected), and the two headphones can be used as the main sound channel alternately.
- Bluetooth reconnects operation: if the bluetooth and the phone have been paired successfully and the phone has not deleted the address code information (pairing name), the headset can be automatically reconnected by restarting the headset (or after the headset is plugged into the charging bin, it will automatically reconnect by unplugging the headset). earpiece
Notes:
- Please do not drop, hit, scratch, twist, hit, crush or throw the bluetooth headset into the water.
- When using a bluetooth headset, keep it away from the magnets, appliances, and speakers;
- Try to avoid placing the bluetooth headset at the extreme temperature (use the ambient operating temperature range of -10°C-45°C).
- Avoid exposing the bluetooth headset to da amp environment;
- If you have not used the bluetooth headset for a long time, please charge it fully and charge it every other week to extend the service life of the headset;
- Do not let the bluetooth headset near the fire source;
- Please do not put the bluetooth headset and charging bin beside inflammable and explosive articles;
Safety instructions
- Please use a standard de charger (DC5v/ 500ma-Za) for charging the charging bin.
- Do not remove the charging bay and bluetooth headset. Or insert other items into the product to avoid damage or even injury to you.
Serious warning:
- Do not use this product while charging, please use the adapter designated by the manufacturer to charge the product.
- Do not disassemble the lithium electronic battery and place it in the fire.
- Do not allow metal objects to touch or short-circuit the electrode.
- Do not knock or squeeze the battery, avoid placing it in an environment of damp corrosion or overheating (>60°C).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>