SBOX PCC-180 PC Computer Case User Manual
- June 10, 2024
- SBOX
Table of Contents
SBOX PCC-180 PC Computer Case
M/B installation
Put M/B on the M/B bracket, align the screw holes then fix the M/B by screws
different M/B has different installation characteristics, please refer to the
user manual of your M/B before installation please refer to the user manual of
your M/B before installation.
Power Supply installation
Put PSU to the position as shown in the illustration, fasten the 4pcs screws
of “a” positions.
ODD installation
Take off the plastic front panel, then put ODD in the ODD bay according to the arrow direction shows in the following illustration, align the screws holes of both sides, then fix ODD by screws.
Please note:
ODD installation depends upon if the front panel is with or without ODD
position. If the front panel is without ODD position, then ignore it.
HDD installation
Put 3.5″HDD in HDD bay as shown in the following illustration, align the screw
holes, then fix HDD by screws.
1 x3.S”HDD or 1 x2.S”SSD can be mounted on the bottom cover
SSD installation
Put 2.5″ SSD on the SSD mounting positions as shown in the following
illustration, then fix it by screws.
3xSSD can be installed on the M/B bracket as shown in the above illustration 1 x3.5″HDD or 1 x2.5″SSD can be mounted on the bottom cover.
FAN positions available
