serenelife SLSBIN21 Locking Storage Container Bin User Manual
- June 7, 2024
- serenelife
Table of Contents
SLSBIN21
Locking Storage Container Bin
Safety & Security Storage Box (21 Gal. Capacity)
User Manual
ASSEMBLY INSTRUCTIONS & LAYOUT
Please Note:
• Be sure to check the letters marked on the sides of the bin and align as
shown in the images for proper orientation.
• Reference the images on the corresponding page!
-
Lay the bottom of the bin down and start by adding in the side plates.
• You will feel the plastic latch engage when the sides are firmly pressed into place. -
Add 3 screws on each side to secure in the side plates.
-
Now we add the front and backplates.
• First align the front and back plates with the side plates in the “Y” direction, and push down latching onto the base.
• Then push in to secure the latches in the “X” direction latching to the side plates. -
Add 3 screws on each side to secure in the front and back plates to the bottom panel.
• Add 4 screws (See the second image) in the comers to securely attach the front and back plates to each side plate. -
Align the hinge of the lid and attach with 2 screws on each side.
-
Set your own password following the instructions below.
HOW TO SET A CUSTOM PASSCODE:
- Adjust the pin to your current passcode (By default, the lock pin is set to “0000”).
- Completely remove the top drawer from the cabinet and on the inside of the cabinet switch the lever located on the lock from the B to A position.
- While the lever is in A position – set the desired new code. Make sure the 4 dials you set are exactly parallel and lined up – you don’t want to set to the wrong number by mistake! (Sample below).
- Once your new passcode is entered, change the lever back from A to the B position.
- Make sure to write down & remember your code! There is no way to recover it once it is set!
If you want to change the passcode, follow these steps:
Step 1: Seeing from the gaps pull the 4 locks of the gaps unified to the same
orientation
Step 2: Such as the gap unified direction in the above figure 0 position, pull
each lock pull 5 times but ensure that each pulls only a number
Step 3: After the second step is completed, you can open and change the new
lock
Features:
- Convenient Storage Box Solution
- Integrated Combination Lock for Security
- User-Defined Number Passcode Setting
- Safe, Rugged, Reliable Construction
- Heavy-Duty Impact Resistance
- Anti-Scratch & Stain-Resistant Housing
- Easy Access Lift-Top Hinges
- Clean & Streamline Moderne Style
- Side Panel Carry Handle Grips
- Perfect for Home, Office, School, Business & Mobile Use
Technical Specs:
- Internal Storage Capacity: 21 Gallon/78 Liter
- Maximum Support Weight: 100+ lbs.
- Construction Material: Reinforced Engineered ABS
- PassCode Type: Manual 4-Digit, Numerical
- Dimensions: 9.3” x 16.3” x 23.2”
Questions? Issues?
We are here to help!
Phone: (1) 718-535-1800
Email: support@pyleusa.com
www.SereneLifeHome.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>