Stage Right STi12 2×2 USB Audio Recording Interface User Manual
- June 7, 2024
- Stage Right
Table of Contents
Stage Right STi12 2×2 USB Audio Recording Interface User Manual
SAFETY WARNINGS AND GUIDELINES
Please read this entire manual before using this device, paying extra attention to these safety warnings and guidelines. Please keep this manual in a safe place for future reference.
- This device is intended for indoor use only.
- Do not expose this device to water or moisture of any kind. Do not place drinks or other containers with moisture on or near the device. If moisture does get in or on the device, immediately remove it from its power source and allow it to fully dry before reapplying power.
- Do not touch the device or any connected cables with wet hands.
- Do not expose this device to excessive vibration,extreme force, shock, or fluctuations in temperature or humidity.
- Do not expose this device to excessively high temperatures. Do not place it in, on, or near a heat source, such as a fireplace, stove, radiator, etc. Do not leave it in direct sunlight.
- Do not place or install this device in an area where it can be exposed to excessive amounts of dust, humidity, oil, smoke, or combustible vapors.
- Clean using a soft, dry cloth only. Do not use chemical cleaners, solvents, or detergents. For stubborn deposits, moisten the cloth with warm water.
- This device has no user serviceable parts. Do not attempt to open, service, or modify this device.
INTRODUCTION
Besides providing the hardware inputs for your microphones or instruments,
audio interfaces are critical for improving the sound of your recordings. Not
only will you achieve better sound, you’ll also be able to record multiple
tracks at once, allowing for collaboration with others or true stereo
recordings. The Stage Right™ STi12 USB Audio
Recording Interface does all of the above and then some.
Studio quality recording has never been as accessible.
FEATURES
- 44.1kHz, 48kHz, 88.2kHz, and 96kHz sampling rates with 24-bit audio bit depth
- Dedicated microphone input, instrument input, lineinput, and two sets of stereo outputs
- Built-in Analog-to-Digital Converter (ADC) with 101dB dynamic range
- Built-in Digital-to-Analog Converter (DAC) with 105dB dynamic range
- Powered by the USB connection to the PC
- Compatible with PCs running Microsoft® Windows® or Apple® Mac® OS X®
- Compatible with all popular Digital Audio Workstation software
- Includes Kensington Security Slot™ (lock not included)
CUSTOMER SERVICE
The Monoprice Customer Service department is dedicated to ensuring that your
ordering, purchasing, and delivery experience is second to none. If you have
any problem wit your order, please give us an opportunity to make it right.
You can contact a Monoprice Customer Service representative through the Live
Chat link on our website www.monoprice.com or via
email at support@monoprice.com. Check the website for
support times and links.
PACKAGE CONTENTS
Please take an inventory of the package contents to ensure you have all the items listed below. If anything is missing or damaged, please contact Monoprice Customer Service for a replacement.
- 1x USB Audio Recording Interface
- 1x USB Cable (Type-A to Type-B)
- 1x User’s Manual
PRODUCT OVERVIEW
Front Panel
-
MIC GAIN1: Controls the input volume of MIC 1 INPUT. The LED around the base of the knob illuminates when the signal is being clipped.
-
GAIN2: Controls the input volume of INPUT2. The LED around the base of the knob illuminates when the signal is being clipped.
-
LED: The LED illuminates when power is applied via the USB connection.
-
MIC 1 INPUT: Combination 1/4″ TRS/XLR jack for connecting a condenser or dynamic microphone.
-
+48V: Switches +48V phantom power on or off. Phantom power is on when the button is depressed.
-
INPUT2: 1/4″ TRS instrument/line input for connecting an instrument level or line level device.
-
LINE/INST: Switches INPUT2 to accept a line level or instrument level input.
-
DIRECT MONITOR: Switches direct monitoring on or off. When direct monitoring is on, you can hear the instrument and microphone inputs in your headphones.
-
HEADPHONES: 1/4″ TRS jack for connecting headphones.
-
MONITOR: Master control for adjusting the input and output monitoring levels.
Rear Panel
-
K-SLOT: Kensington Security Slot™ for use with a security lock to prevent theft. Lock not included.
-
USB: USB connector for connecting the device to your computer using the included USB cable. The device receives all the power it needs from the USB connection.
-
PHONE: 3.5mm TRS connector for connecting a phone, mp3 player, or other audio device using the included 3.5mm TRRS audio cable.
-
LINE OUTPUTS: Two balanced 1/4″ TRS jacks for connecting powered speakers or an amplifier.
INSTALLATION
Perform the following steps to connect the USB Audio Recording Interface with your computer.
- Place the device on a flat surface near your computer.
- Rotate the MIC GAIN1, GAIN2, and MONITOR knobs fully counterclockwise to the minimum position.
- Place the +48V switch in the off position (out).
- Ensure that your computer is powered on.
- Open your web browser and navigate to www.monoprice.com. Type 625909 in the search bar, then hit ENTER. Go to the bottom of the page and download the drivers zip file.
- Extract the zip file, then install the drivers for your operating system.
- Plug one end of the included USB cable into the USB port on the device, then plug the other end into an available USB port on your computer. The LED on the front panel will illuminate.
- Open your computer’s audio interface and ensure that STi12 USB is selected as the audio input and output device.
Congratulations, your USB Audio Recording Interface is installed and ready for use!
OPERATION GUIDELINES
- To prevent transient spikes from damaging your equipment, always turn the two MIC GAIN1, GAIN2, and MONITOR knobs fully counterclockwise to the minimum position before making or breaking any connections.
- Even if using a condenser microphone that requires +48V phantom power, ensure that the +48V switch is in the off position (out) before plugging a microphone into the MIC 1 INPUT jack. Turn on +48V phantom power only when a condenser microphone is connected.
- The PHONE jack on the rear panel allows you to play music from a mobile device, so you can play or sing along with audio tracks for recording or practice purposes.
TECHNICAL SUPPORT
Monoprice is pleased to provide free, live, online technical support to assist
you with any questions you may have about installation, setup,
troubleshooting, or product recommendations. If you ever need assistance with
your new product, please come online to talk to one of our friendly and
knowledgeable Tech Support Associates.
Technical support is available through the online chat button on our website
www.monoprice.com or through email by sending a
message to tech@monoprice.com. Check the website for
support times and links.
To download the latest drivers, firmware, manuals, etc., go to www.monoprice.com and type the P/N into the search bar. If available, support files are linked at the bottom of the product page.
SPECIFICATIONS
Main Unit
P/N
| 625909
---|---
Sampling Rates|
44.1kHz, 48kHz, 88.2kHz, and 96kHz
Bit Depth
| 24-bit
ADC Dynamic Range|
101dB A-Weighted (all inputs)
ADC Chipset Dynamic Range
| 114dB
DAC Dynamic Range|
105dB A-Weighted (all outputs)
DAC Chipset Dynamic Range
| 114dB
Compatible Operating Systems|
Microsoft® Windows®, Apple® Mac® OS X®
Mic Input
Frequency Response
| 20Hz ~ 20kHz
---|---
Gain Range|
0 ~ 1686mVrms
THD
| -87dB
Background Noise (EIN)|
189µVrms
Dynamic Range
| 87dB
Maximum Input Gain|
35mVrms
Instrument Input
Frequency Response
| 20Hz ~ 20kHz
---|---
Gain Range|
0 ~ 291mVrms
THD
| -78dB
Background Noise (EIN)|
203µVrms
Dynamic Range
| 78dB
Maximum Input Gain|
123mVrms
Line Input
Frequency Response
| 20Hz ~ 20kHz
---|---
Gain Range|
0 ~ 380mVrms
THD
| -76dB
Background Noise (EIN)|
298µVrms
Dynamic Range
| 76dB
Maximum Input Gain|
205mVrms
Phone Input
Frequency Response
| 20Hz ~ 20kHz
---|---
Gain Range|
0 ~ 1390mVrms
THD
| -89dB
Background Noise (EIN)|
301µVrms
Dynamic Range
| 89dB
Maximum Input Gain|
935mVrms
Line Output
THD
|
-74dB
---|---
Background Noise
| 207µVrms
Dynamic Range|
74dB
REGULATORY COMPLIANCE
Notice for FCC
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Modifying the equipment without Monoprice’s authorization may result in the
equipment no longer complying with FCC requirements for Class B digital
devices.
In that event, your right to use the equipment may be limited by FCC
regulations, and you may be required to correct any interference to radio or
television communications at your own expense.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Notice for Industry Canada
This Class B digital apparatus complies with Canadian ICES003.
Monoprice™, Stage Right™, the Stage Right logo, and all Monoprice logos are trademarks of Monoprice Inc.
Microsoft® and Windows® are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
Apple®, Mac®, and OS X® are trademarks of Apple Inc., registered in the U.S. and other countries.
Kensington® is a registered trademark of ACCO Brands Corporation. Kensington Security Slot™ is a trademark of Kensington Computer Products Group
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>