STAGE RIGHT LP3 Looper Guitar Pedal User Guide
- June 6, 2024
- Stage Right
Table of Contents
STAGE RIGHT LP3 Looper Guitar Pedal User Guide
FEATURES
- High speed recording at 52 megabytes per second
- Three independently selectable recording tracks
- No crosstalk between tracks
- 30 minute recording time for each of the three tracks
- Unlimited overdub layers
- Download or upload tracks to or from a PC using the Micro USB connection
PRODUCT OVERVIEW
- DC IN: DC barrel connector for connecting a standard 9 VDC guitar pedal AC power adapter (not included). The connector has a 5.5mm diameter positive barrel and 2.1mm diameter negative pin.
- TRACK: Three position switch to select each of the three tracks.
- LEVEL: Adjusts the output volume level.
- INPUT: 1/4″ mono TS jack for connecting a previous pedal in the effect chain or a guitar.
- OUTPUT: 1/4″ mono TS jack for connecting to another pedal in the effect chain or an amplifier.
- SAVE LED: The LED illuminates to indicate the status. See the FUNCTIONS section for LED indication details.
- SWITCH: Step on the switch to control the various functions. See the FUNCTIONS section for details.
- MicroUSB: Micro USb port for connecting a PC to upload or download the tracks.
FUNCTION
| Operation | Function | LED |
|---|---|---|
| Press switch | Start recording | Red |
| Press switch while recording | Playback track | Green |
| Press switch during playback | Overdub | Red |
| Press and hold switch during playback | Delete or recover the previous layer |
Flashing Green
Double press switch during playback| Stop playback| Flashing Green
Press and hold switch when not recording| Delete all files| Off
Press and hold SAVE when not recording| Save files| Flashing Red
OPERATION
- Connect the input and output cables, then connect an AC power adapter. If there is no data inside the selected track, the LED will be off. If the LED is flashing green, playback of the previously recorded track is paused.
- During playback, press the switch to overdub. The LED changes from green to red.
- While recording, press the switch to playback the recorded track The LED changes from red to green.
- During playback, press and hold the switch to delete the previous overdub. Press the switch again to recover the deleted overdub. If there are no overdubs, press and hold the switch to delete the track
- During playback, double press the switch to stop/pause playback. Press and hold the SAVE button to save the initial recording and all overdubs. If the SAVE button is not pressed, downloading the track will not contain any overdub layers. Note that the last overdub layer cannot be deleted after the track is saved.
- While playback and recording is stopped, press and hold the switch to delete all recorded data in the currently selected track.
SPECIFICATION
| Model | 625876 |
|---|---|
| Input Power | 9 VDC adapter, center negative |
| Current Draw | 70mA |
| Dimensions | 3.7′ x 1.7′ x 1.9″ (94 x 42 x 48 mm) |
| Weight | 52 oz. (147g) |
Read User Manual Online (PDF format)
Loading......