YIROKA WF001-708B Wifi Video Doorbell User Manual
- June 6, 2024
- YIROKA
Table of Contents
VIDEO DOORBELL
User Manual
Please read the user manual before use
Product Description
Technical Parameters
| APP | TuyaSmart |
|---|---|
| Power Supply | 2*18650 5200mAh Battery (charge 4-8h for first use, charge |
adapter: 5V/2A＞2A. External Power Input: AC&DC12-24V/1A
Doorbell Button| Press the button to activate the doorbell
Indicator Light| Red light solids on the camera network is abnormal Red light
blinking: waiting for connecting WiFi or being connected now (faster blinking)
Blue light solids on camera running correctly
Microphone| Captures sound for your video
Sensor type| 1/3” CMOS
---|---
Pixel| 2-mega pixel
**** Min luminance| Min Color 0.01Lux@F1.2 Color
0.01Lux@F1.2
Black and White 0.001Lux@F1.2
Viewing Angle| 170°
Shutter| 1/25~1/100,000 per second
IR| 4pcs 5mm 850mm LED
Video Compression Standard| H.264/H.265
Compression Output Bit Rate| 32Kbps~2Mbps
Maximum Image Resolution| 1920×1080
Frame Rate| 1~25 per second
Audio| Full duplex audio
Storage| TF Card (Max. 128G) & Cloud Storage
Image Setting| Support HD/SD, support mirror
Reset| Support
Interface Protocol| Private
Communication Protocol| TCP/IP, HTTP, DHCP, DNS
General Function| Dual-stream, password protection
WIFI| Support 2.4G WIFI IEEE802.11b/g/n
Triggering Method| Support button triggering, PIR motion detection triggering
Working Temperature & Humidity| -20℃~50℃, humidity less than 90% (without
condensation)
Waterproof| IP65
Paired with Door Chime
The video doorbell is turned on before pairing with the door chime:
A video doorbell can be used with a door chime (products already have been
paired in the factory.) If you need to replace the video doorbell, increase or
decrease the doorbell quantity, please follow steps below:
Learning code pairing
Press and hold the “Set” button for about 3 seconds, the door chime will ring (Bird voice), press the video doorbell 2 times within 30 seconds. If the door chime rings, the pairing is successful. If the door chime does not ring, please press the video doorbell again until pairing is successful. For matching multiple video doorbells, please repeat the above operation.
Delete pairing
Press and hold the “Set” button for about 10 seconds until the door chime
rings two times. All pairing codes will be deleted completely.
Download APP and Connect
TuyaSmart is available for both IOS and Android. Search the name “TuyaSmart” in APP Store or scan the QR-code to download the APP.
Support
https://smartapp.tuya.com/tuyasmart
Set Up Router
This device only supports a 2.4GHZ wifi router, does not support a 5GHZ
router, please set the relevant parameters of the router before WIFI
configuration. WIFI password is not allowed to include special characters such
as ~!@#$%^&*() etc. When configuring wifi for the device, the mobile phone and
device are as close as to the router, which can speed up the configuration of
the device.
Registration Process
Open the Tuya APP, click “Register”, read the “Privacy Policy ” and click “Agree”. Input a legal and valid mobile number or email address, then click “Continue”. And enter the verification code, then log in to the APP.
Connect
1. Click the “Add Device” or “+” icon to add the camera. Click “Security &
Video Surveillance” >> “Smart Camera(Wi-Fi)” or “Smart Doorbell”.
2 . In the “Add Device” interface, click the “Next” icon, then enter the WIFI
name and password.
Note：
- The camera only supports a 2.4GHZ WIFI network.
- The WIFI name and password mustn’t exceed 24 digits.
- Please make sure the indicator light is flashing quickly before entering into WIFI page. If not, please try to reset the device.
3 . Use a video doorbell to scan the QR code in the mobile phone (please place
the mobile phone QR code facing the video doorbell about 15-20cm) until
hearing doorbell “dong dong” sound prompt and doorbell indicator flashes blue.
Then click “I Heard a Prompt” icon.
4 . When connecting, please make sure your router, mobile phone, and doorbell
are as close as possible. When the doorbell is added successfully, you can
click the” ” icon to Rename the doorbell
Setting
In the “Smart Video Doorbell” interface, you can click the” ” icon to set the
doorbell’s basic functions.
Battery Power Tip:
The battery power and charging status can be checked in the APP “Smart Video
Doorbell” interface.
indicates battery power status.
indicates battery in charging status.
Share Device
In the “Smart Video Doorbell” interface, you can click the “Share Device”
icon, then click the “Add Sharing” icon and enter their phone number or email
to share the device.
Remark: Please tell shared members to download and register Tuya APP
first.
**Remove Device
**
Remove Device
1. In the “home” interface, click “Device Management” in the “…” icon,
then select the smart video doorbell and click “Remove Device” to remove the
device.
2. In the “Smart Video Doorbell” interface, click the” ” icon, and click
“Remove Device” at the end of the setting interface to remove it.
If you don’t need to share the device, you can click the shared account, swipe
left to click “Delete”, and no more share the device.
More Services
If you want to experience more services, you can click the “Me” icon, then
click “Third-Party Voice Services”>>“More>” (like Alexa, Google Assistant etc.
voice service) or Featured” (like Cloud Storage, Message Notification, etc.
service)， but it may have charge for the service. Please check the app tips
for specific fees.
Product Installation
Before installation, please complete the operation as per the user manual and
place the doorbell in the installation location to test doorbell work well or
not.
Note: Don’t install the doorbell on the metal door to avoid the metal
door shielding the wifi signal.
Doorbell Installation Methods
1. 3M double-sided tape installation:
| 1 Tear off the 3M double-sided tape on the doorbell backplate.
---|---
| 2 Fix the doorbell backplate to the wall (make sure it is smooth & dust-free
surface), and press about 30 seconds to fix it.
---|---
| 3 Fix the doorbell to the
backplate, then fix with an anti-theft screw.
Screw installation:
| 1. Use the
doorbell backplate to locate the hole, drill the hole, and fix the screw
rubber plug to the hole.
---|---
| 2. Fix the doorbell backplate
with screws to the rubber plug.
| 3. Fix the doorbell to the backplate with an anti-theft screw.
Doorbell Disassembly
Unscrew the anti-theft screw with a screwdriver, then grab the doorbell and
push it up to remove.
Functions
Two Way Audio
When the visitor pushes the doorbell button, you will get a call notification.
You can see and hear the visitor if get through the call in your APP.
PIR Motion Detection
Call notification will be sent to your phone APP when movement is detected.
Share Device
The doorbell can be shared with families and friends and they can also preview
online.
Record
Record every moment using SD card storage or cloud storage.
Night Vision
Powerful night vision means no interruptions even in night.
FAQ
Q: What should I pay attention to when testing?
A: Please read our manual carefully before testing, if any questions, please
check with our factory. Most importantly, when speaking with a visitor in
front of a doorbell, pls place the phone at least 5m away from the doorbell,
which won’t cause signal interference or noise.
Q: When does the doorbell need to be reset? And how to reset?
It needs to be reset when the doorbell couldn’t work well normally or can’t be
connected to the phone. You can use the screwdriver or other tooling to press
the Reset hole for about 10 seconds to reset.
Q: How to do if repeated adding failed?
A: After adding failed for the first time, please reset the doorbell or power
off, then try to add again. And it only supports a 2.4GHZ WIFI router, please
make sure you are using a 2.4GHZ WIFI router, also correct the wifi password.
Q: The doorbell video cannot be previewed properly?
A: Check whether a network is good or not, you can place the doorbell close to
the router. If still not works, pls reset the doorbell and add it again.
Q: How to change the doorbell network to another router?
A: Remove the device on the APP and configure the device again.
Q: Why Can’t I receive the push message notification by phone APP?
Please confirm that the APP has been running well on the
A: phone and relevant reminder functions have been opened like message
notification and authority confirmation in the phone system.
Q: Why doesn’t the device identify the SD card?
A: Please insert the SD card before the doorbell is powered on. And make sure
whether the SD card is good and FAT32 format or not. This device complies with
part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may
cause undesired operation. Any changes or modifications not expressly approved
by the party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction FCC ID:
XQK- WF 1- 708B
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>