My MultiClean™ Allergen Pet Lift-Off® & Non Lift-Off has No Suction | Support
- June 7, 2024
- Bissell
Table of Contents
If your vacuum is not suctioning like it used to it is likely due to an
obstruction in the air pathway
Follow these steps to resolve:
-
Test for suction at end of the Extension Wand (dirt tank must be attached to machine)
- Push the release button and lift the Wand up
- Turn on, hold hand over end of Extension Wand
-
Is there suction at the end of the Extension Wand?
- Yes > Go to __Lower Hose/Foot
- No > Disconnect the Hose from the Extension Wand
- Turn on, hold hand over end of Hose
-
Is there suction at the end of the Hose?
- Yes > This would indicate there is a clog in the Extension Wand
- Push broomstick through Extension Wand to clear debris
-
No > Disconnect the Hose from the back of machine
- Turn Hose cuff to left to remove
-
Inspect the hose, is it cracked or damaged?
- Yes > Replace the hose > Go to Parts & Supplies
- No > Push a broomstick through hose to clear clogs & debris
-
Reattach hose to the back of the machine
-
Turn on & check for suction at the end of the hose
- Is there suction?
- Yes > If you’re still having suction issues at the foot > Go Lower Hose/Foot
- No > Go to Filters/Tank
-
Recipient Email
Your Email
Your Name
Was this answer helpful?
Yes
No
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>