pTron Bassstrings 2A Wireless Neckband User Guide

: June 7, 2024
: pTron

Table of Contents

pTron Bassstrings 2A Wireless Neckband User Guide
- Product Details
Read User Manual Online (PDF format)
Download This Manual (PDF format)

pTron Bassstrings 2A Wireless Neckband User Guide

Bassstrings 2A

Product Details

How to Charge the Neckband:

Before charging make sure the Neckband has been switched off.
Plug micro USB cable into the charging port of neckband; plug the other side of micro USB cable into the USB charger or other charging device of DC5V/1A power source. Charging will start and the red LED light remains bright on the neckband.
It takes approximately 90 minutes to get fully charged. Red LED light will turn off once the charging process is completed.

Power on:

Keep pressing the MF button until blue light blinks and then neckband prompts a voice that it has been powered on.

Pairing Mode:

Keep pressing the MF button until blue and red lights blinks alternatively. It then prompts a voice for completion of pairing mode.

Pair your neckband with your mobile phone:

Keep the distance between the neckband and mobile phone (or other devices which needs to be connected) within 1 meter. The closer, the better.
Keep pressing the MF button until blue and red lights blink alternatively, to enter into pairing mode.
Initiate wireless function of mobile phone (or other devices that need to be connected). Then neckband’s paring name will be shown on your phone.
Select paring name and the neckband will automatically connect with your mobile phone, and only the blue light will start to blink.
Attention: It takes a maximum of 120 seconds to pair-up the neckband with your mobile phone. The wireless pairing mode will stop when the lights stop blinking. Please retry the steps from 1 to 4 to pair again in case if this operation fails.
Switch on the wireless search function in your mobile phone or other devices that need to be connected. Then the neckband will automatically reconnect with the mobile phone which has connected last time.

Switch off: Keep pressing the MF button until red light blinks and goes out, and the neckband prompts a voice for power off.
Answer incoming call: When there is an incoming call, the neckband will prompt a voice message, press the MF button once to answer the call, or use your mobile phone to answer it.
Reject a call: When there is an incoming call, the neckband will prompt a voice message. Press MF button for 2s to reject a call.
End a call: Press MF button once to end a call.
Last Number Redial: In standby mode, double-click the MF button, to redial your last call.
Music Play / Pause: Press MF button once to play/ pause music.
Volume adjustment / Music selection: Press Vol (+) and Vol (-) keys to adjust volume. Alternatively, by Long pressing the Vol (-) and Vol (+) keys to go to next track and to select previous track respectively.
Awake Voice Assistant: Long press the MF button for 2 seconds to activate your device’s voice assistant.

Disclaimer:
The colors and specifications shown/mentioned in the user manual may differ from the actual product. Images shown are for representation purpose only. Other product logos and company names mentioned herein may be trademarks or trade names of their respective owners.