Cypress Hills AXCCMAR12 Marana Desk Installation Guide
- June 7, 2024
- Cypress Hills
Table of Contents
ASSEMBLY INSTRUCTIONS
MARANA DESK
MODEL # AXCCMAR12
DO NOT RETURN
FOR REPLACEMENT PARTS OR OTHER INQUIRY PLEASE CONTACT US AT:
1-800-667-8992
PLEASE ENSURE TO HAVE THE COLLECTION NAME AND DESCRIPTION FROM THE PACKAGING
OR INSTRUCTION BOOKLET
IMPORTANT: Please read this manual carefully before beginning the assembly of this product. Keep this manual for future reference.
SAFETY INFORMATION
Identify all the parts and hardware. Do not discard of the packaging until you
have checked that you have all of the parts and hardware required. The
hardware package may have spare parts.
WARNING : This item contains small parts which can be swallowed by
children and pets. Keep children and pets away during assembly. To avoid the
danger of suffocation, always keep plastic bags away from children and pets.
We recommend that you assemble this unit on a carpeted floor to avoid
scratches. If using power tools, set the tool to low torque to avoid damage.
May require 2 people for ease of assembly.
IMPORTANT: Please read this manual carefully before beginning the assembly of this product. Keep this manual for future reference.
CARE and MAINTENANCE
Perhaps the greatest environmental damage to wood furniture comes from wide
swings in relative humidity (RH) in our homes. Wood absorbs and desorbs water
as relative humidity rises and falls, and in doing so it swells and shrinks.
Making matters worse, it expands and contracts unequally along with different
grain directions. As humidity changes, the components of wooden objects are
continually pushing and pulling against each other. This pressure often
results in parts of furniture no longer fitting together closely or becoming
distorted or breaking from their own internal stresses.
The response to relative humidity changes begins with determining the annual
average RH for your particular space. Then try to keep the RH in the space
where your furniture is as close to that average as possible, generally within
about 10% up or down. De-humidify in the summer and humidity in the winter.
Be aware that raising the temperature lowers the humidity and vice versa.
Thus, modern heating systems, which can drive down interior RH in the winter,
almost invariably cause problems for furniture. To counteract their effect,
you can either modify the RH by keeping furniture containing spaces cooler in
the winter or most importantly, have a good working humidifier for your home.
A humidistat automatically works to balance the humidity in your home so it is
constant. Dry indoor air can suck enough moisture from its surroundings to do
permanent damage to wood, causing it to crack or split.
Remember, that not all woods are created equal. Two factors that help
determine how rapidly a wood will lose moisture are pore size and surface
hardness. A piece made from a
dense and hardwood will dry less rapidly than pieces made from softer woods.
Furniture that is sealed and lacquered will lose moisture more slowly than an
unfinished piece while pieces with veneer finishes are not only stronger but
lose moisture more
slowly than other finishes.
To help protect your wood furniture, take these steps:
- Use a humidifier, preferably one with an automatic control system that can sense the humidity level and adjust itself accordingly. Don’t over-humidify; that can damage wood by causing it to expand and contract.
- Keep furniture out of direct sunlight, which can cause it to dry out, crack and warp.
- If you can avoid it, don’t put furniture near heating vents. If you must, keep the piece 3 to 4 inches away from the wall, giving the heat and air space to circulate.
- Dust with a soft dry cloth.
- Do not use liquid or aerosol products.
- To avoid marking, do not place rubber on the surface (footpads, etc.)
- For soil build-up, wipe with a damp cloth & dry.
- Do not use abrasive cleaners.
PRE-ASSEMBLY INFORMATION
MODEL # AXCCMAR12
PART DESCRIPTION
HARDWARE DESCRIPTION
NEED HELP? For help with assembly or if you are missing a part, Please call customer service at 1-800-667-8992.
COMPONENTS-KEY DIAGRAM
MODEL # AXCCMAR12
ASSEMBLY
MODEL # AXCCMAR12
1. Attach Legs B to the Top A.
2. Use 8 Allen Key Bolts, Lock Washers, and Washers 1 to fix parts A and B.
3. Use Allen Key 2 to tighten Bolts. Do not over-tighten.
1. Use a Phillips screwdriver to attach Handle 3 to Top A.
Note: Levelers on the bottom of legs can be adjusted if the floor is uneven.