BRIO Builder Light Battery Installation Instructions

: June 3, 2024
: BRIO

Table of Contents

Builder Light Battery Installation
Replacing batteries:
Important:
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

Builder Light Set
Instructions Manual

Builder Light Battery Installation

Battery-powered features of the toy:
Bring light to your Builder system set with these newly added cool light units which were just added to the building system. The light units have 4 diﬀerent positions; OFF, a steady light, a ﬂashing light or a pulsating light. Combine the four included light units together with the colored, transparent components to create exciting light variations and really cool color eﬀects. The lighting unit is compatible with existing components in the Builder system series.

Keep in mind that:

The toy is not water-resistant and should never be washed in a dishwasher.
Wipe oﬀ the toy with a clean cloth to remove any foreign materials.
For safety reasons, do not disassemble the toy.
The color of the toy may fade over time.
Avoid strong sunlight and other sources of heat.
Only indoor play is recommended.

Please visit our website at brio.net for more information on how to care for your prized BRIO toy.

Replacing batteries:

The light eﬀects for this toy are powered by 2 x 1,5V (LR44) button cell batteries (included). Use a screwdriver to open the battery cover (see illustration). Install the batteries as shown (+/–). Close the battery cover and tighten the screw.

BRIO Builder Light Battery - FIGURE 2

Warning:

Dispose of used batteries immediately.
Keep new and used batteries away from children.
If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

Important:

Only adults should install and replace batteries.
Diﬀerent types of batteries or new and used batteries are not to be mixed.
Only recommended batteries of the same or equivalent type as recommended (1.5V) are to be used.
Batteries are to be inserted with the correct polarity.
Exhausted batteries are to be removed from the toy.
The supply terminals are not to be short-circuited.
Always remove batteries if the toy is not to be used for some time.
Protect the toy from water or dampness.
Do not attempt to recharge non-rechargeable batteries..
Rechargeable batteries are to be removed from the toy before being charged.
Rechargeable batteries are only to be charged under adult supervision.
Used batteries and electrical components must be disposed of at an approved collection point.
Electrical components or batteries must not be thrown with household waste.

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:

this device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Please retain for future reference!

BRIO AB, Box 305, SE-201 23 Malmö, Sweden.
Tel: +46 40 619 40 00.
© 2020 BRIO AB/4593-896 B