MONOGRAM Stainless Steel Professional Vent Hoods with QuietBoost Blower Owner’s Manual
- June 7, 2024
- MONOGRAM
Table of Contents
OWNER’S MANUAL
Stainless Steel Professional Vent Hoods
With QuietBoost™ Blower
MONOGRAM.COM
MODEL INFORMATION
MODEL NUMBERS
ZVW1360
ZVW1480
WRITE DOWN THE MODEL AND SERIAL NUMBERS
You can find them on a label located on the front panel of the unit.
These numbers are also on the Consumer Product Ownership Registration Card
packed separately with your vent hood
Please write these numbers here:
Model Number
Serial Number
Use these numbers in any correspondence or service calls concerning your vent
hood.
CONSUMER SUPPORT
MONOGRAM WEBSITE
Have a question or need assistance with your appliance? Try the Monogram
website 24 hours a day, any day of the year! You can also shop for more great
Monogram products and take advantage of all our online support services
designed for your convenience. In the US: monogram.com
REGISTER YOUR APPLIANCE
Register your new appliance online at your convenience! Timely product
registration will allow for enhanced communication and prompt service under
the terms of your warranty, should the need arise. You may also mail in the
pre-printed registration card included in the packing material. In the US:
monogram.com/register
SCHEDULE SERVICE
Expert Monogram repair service is only one step away from your door. To
request service, call 800-444-1845 or
visit our website at monogram.com/contact
EXTENDED WARRANTIES
Purchase a Monogram extended warranty and learn about special discounts that
are available while your warranty is still in effect. You can purchase it
online anytime. Monogram Service will still be there after your warranty
expires.
In the US: monogram.com/extended-warranty
REMOTE CONNECTIVITY
For assistance with wireless network connectivity (for models with remote
enable), visit our website at monogram.com/connect
PARTS AND ACCESSORIES
Individuals qualified to service their own appliances can have parts or
accessories sent directly to their homes (VISA, MasterCard and Discover cards
are accepted). Order on- line today 24 hours every day.
In the US: monogram.com/parts
Instructions contained in this manual cover procedures to be performed by any
user. Other servicing generally should be referred to qualified service
personnel. Caution must be exercised, since improper servicing may cause
unsafe operation .
CONTACT US
If you are not satisfied with the service you receive from Monogram, contact
us on our website with all the details including your phone number, or write
to:
In the US: General Manager, Customer Relations | Monogram Appliances,
Appliance Park | Louisville, KY 40225
monogram.com/contact
IMPORTANT SAFETY INFORMATION
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE
WARNING Read all safety instructions before using the product. Failure to follow these instructions may result in fire, electrical shock, serious injury, or death.
WARNING GENERAL SAFETY INSTRUCTIONS
WARNING TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:
- Use this unit only in the manner intended by the manufacturer. If you have questions, contact the manufacturer.
- Before servicing or cleaning the unit, switch power off at the service panel and lock the service disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel.
- Do not use this unit with any solid-state speed control device.
CAUTION FOR GENERAL VENTILATING USE ONLY. DO NOT USE TO EXHAUST
HAZARDOUS OR EXPLOSIVE MATERIALS AND VAPORS .
*WARNING TO REDUCE THE RISK OF INJURY TO PERSONS IN THE EVENT OF A RANGE TOP
GREASE FIRE, OBSERVE THE FOLLOWING:**
-
SMOTHER FLAMES with a close-fitting lid, cookie sheet or metal tray, then turn off the burner. BE
CAREFUL TO PREVENT BURNS. If the flames do not go out immediately, EVACUATE AND CALL THE FIRE DEPARTMENT. -
NEVER PICK UP A FLAMING PAN— You may be burned.
-
DO NOT USE WATER, including wet dishcloths or towels—a violent steam explosion will result.
-
Use an extinguisher ONLY if:
- You know you have a Class ABC extinguisher, and you already know how to operate it.
- The fire is small and contained in the area where it started.
- The fire department is being called.
- You can fight the fire with your back to an exit.
- Based on “Kitchen Fire Safety” published by NFPA.
WARNING TO REDUCE THE RISK OF A RANGE TOP GREASE FIRE:
-
Never leave surface units unattended at high settings.
Boilovers cause smoking and greasy spillovers that may ignite. Heat oils slowly on low or medium settings. -
Always turn the hood ON when cooking at high heat or when flambéing food
-
Clean ventilating fans frequently. Grease should not be allowed to accumulate on the fan or filter
-
Use proper pan size. Always use cookware appropriate for the size of the surface element.
-
Do not operate the microwave feature without food in.
WARNING SERVICING
If You Need Service . . .
Do not attempt to repair or replace any part of the vent hood unless it is
specifically recommended in this manual. All other servicing should be
referred to a qualified technician.
Be sure electrical power is off before servicing the unit. It may be necessary
to remove the vent hood blower in order to service components such as the
blower motor or air vent mechanism.
Disconnect power to the cooktop and remove it first. Reverse the steps in the
Install the Vent Hood section in the Installation Instructions to remove the
blower. Service parts are available from a Monogram Service and Parts Center.
READ AND SAVE THESE INSTRUCTIONS
CONTROLS
Throughout this manual, features and appearance may vary from your model.
- Rangehood Control Panel: The control panel is located on the bottom of the canopy. The function of each control pad is noted below.
- Power: On/Off switch for the fan. The fan can be operated by pressing any of the fan setting pads. Hold POWER pad for 3 seconds to activate the Delay-Off feature, which automatically turns the fan off after 15 minutes. The indicator light above POWER will blink on/off to indicate the Delay-Off feature is activated.
- Fan Setting: Speed control for fan. Fan speed is powered by QuietBoost™ Technology. This unique technology is designed to minimize ventilation noise and enhance motor efficiency for a peacefully quiet, odor-free kitchen. Press LOW for LOW speed. MED for MEDIUM speed and HIGH for HIGH speed. Press and hold the HIGH pad for 3 seconds to activate the BOOST speed that will run for 15 minutes. The high button LED will blink on/off to indicate the Boost feature is activated.
- Light: Controls the lights. Press the LIGHT pad to turn the lights to the highest setting. Press the LIGHT pad again to switch to medium brightness. Press the LIGHT pad again to turn the lights to dim. Press the LIGHT pad a fourth time to turn off the lights.
- Chef Connect: Hold the CHEF CONNECT pad down for 3 seconds to activate the Bluetooth ®. This is a Bluetooth ® pairing feature for use with other compatible Chef Connect enabled products on a cooktop or range. When the device is paired, the default sync settings will be activated upon receiving a command from the range or cooktop. To change the default sync setting, refer to the Chef Connect section. See the Chef Connect section for more details.
- Wi-Fi: Hold down the LOW pad for 3 seconds to initiate the Wi-Fi connection. The Wi-Fi indicator light turns on when connected, see the Wi-Fi Connect section for details.
HEAT SENSOR
Your hood is equipped with a HEAT SENSOR thermostat. This thermostat is a
device that will turn on or speed up the blower if it senses excessive heat
above the cooking surface.
- If the blower is Off – it turns the blower On to BOOST speed.
- If the blower is On at a lower speed setting – it turns the blower up to BOOST speed.
When the temperature level drops to normal, the blower will return to its original setting.
FOR YOUR SAFETY
Before servicing or cleaning the unit, switch power off at the service panel
and lock the service disconnecting means to prevent power from being switched
on accidentally.
When the service disconnecting means cannot be locked, securely fasten a
prominent warning device, such as a tag, to the service panel.
CHEF CONNECT
CHEF CONNECT OPERATION BLUETOOTH®CONNECTION
To pair with another device:
To start the pairing process on the hood, press and hold the CHEF CONNECT pad
for 3 seconds. The backlight for all the icons will light up until the hood is
paired with the range or other device. If the pairing is successful, the
indicator light above CHEF CONNECT will turn on and become solid. The hood
lights and fan default sync setting will be activated.
It will time out after 2 minutes if the pairing is not completed, after which
the pairing sequence will need to be restarted.
To cancel pairing:
To cancel the pairing, hold the CHEF CONNECT button down for 3 seconds and
then turn off the hood.
Default Sync Settings:
The factory default setting for the light will be the brightest. The factory
default setting for the fan sync will be OFF. The user can change the Default
Sync Settings by pressing and holding the MED button for 3 seconds. This will
enter the Default Settings Mode. Once in this mode, the backlights for all
buttons will blink on/off indefinitely and the fan and light will switch to
the current Default Sync Setting, so the user knows what the current default
value is. At this time, set the light and fan to the desired default levels.
Once the user is satisfied with the selection, press and hold the POWER button
for 3 seconds. This will exit this mode. At that time the backlights will stop
blinking and the state of the fan and light will change back to their prior
state before entering the Default Settings Mode.
WI-FI CONNECT
CONNECTING YOUR WI-FI CONNECT ENABLED HOOD (ON SOME MODELS)
Your Monogram hood is designed to provide you with two-way communication between your appliance and smart device. By using the Monogram Wi-Fi Connect features, you will be able to control essential hood operations such as fan speed, light functions, delay-off and filter notification using your smartphone or tablet. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
What you will need
Your Monogram hood uses your existing home Wi-Fi network to communicate
between the appliance and your smart device. In order to setup your Monogram
hood, you will need to gather some information:
-
Each Monogram hood has a connected appliance information label that includes an Appliance Network Name and Password. These are the two important details that you will need to connect to the appliance. The label is located on the side of the unit behind the filters.
Connected Appliance Information
FCC ID: ZKJ-WCATA005
IC: 10229A-WCATA001
MAC ID: ****
Network: ****
Password: ** -
Have your smartphone or tablet ready with the ability to access the internet and download apps.
-
You will need to know the password of your home Wi-Fi router. Have this password ready while you are setting up your Monogram hood.
Connect your Monogram hood
- On your smartphone or tablet visit monogram.com/connect to learn more about connected appliance features and to download the appropriate app.
- Follow the app onscreen instructions to connect your Monogram hood.
- Once the process is complete, the indicator light located on your Monogram hood display will stay on solid and the app will confirm you are connected.
- If the indicator light does not turn on or is blinking, follow the instructions on the app to reconnect. If issues continue, please visit monogram.com/connect for assistance regarding hood wireless connectivity.
To connect additional smart devices, repeat steps 1 and 2.
Note that any changes or modifications to the remote enable device installed
on this hood that is not expressly approved by the manufacturer could void the
user’s authority to operate the equipment.
Enhanced Wi-Fi Features
Once your product is connected to Wi-Fi, you have access to enhanced features
via a phone app.
Delay Off Timer: This feature allows the user to adjust the delay-off
time from 1 minute to 15 minutes. The default delay off time is 15 minutes.
Boost Timer: This feature allows the user to adjust the boost time from 1
minute to 15 minutes. The default boost time is 15 minutes
Night Light Timer: This feature allows the user to set time for the night
light to turn on and off automatically.
Grease/Charcoal Filter Notifications: This feature sends a regular
reminder to the user to clean their grease filters, and or to replace their
charcoal filter if the hood is set up in recirculation mode.
CARE AND CLEANING
BAFFLE GREASE FILTERS AND DRIP TRAYS
The metal baffles channel grease released by foods on the cooktop into the
drip trays. The baffles also help prevent flaming foods on the cooktop from
damaging the inside of
the hood.
For this reason, the baffles must ALWAYS be in place when the hood is used.
The grease baffles and drip trays should be cleaned once a month, or as
needed. To clean the grease baffles and drip trays, drain and wipe all excess
grease with a dry paper towel. Soak them and then swish them around in hot
water and detergent. Don’t use ammonia or ammonia products because they will
darken the metal. Do not use abrasives or oven cleaners. To clean hard-to-
reach areas of the filter, use a soft brush. Rinse, shake and let them dry
before replacing them. They may also be cleaned in an automatic dishwasher.
NOTE : Some discoloration of the filters and grease drip trays may occur
in the dishwasher. To remove: Grasp the baffle knobs then pull the baffle down
and towards you.
To replace the drip trays:
- Place and seat the drip tray into the hood track.
- Slide them left or right until all trays are side-by-side in place in the track.
To replace the baffles:
- Hold the baffle by the knob and place the other end of the baffle up in the front lip of the hood.
- Push the backside up in the rear of the hood until it locks into place.
STAINLESS STEEL SURFACES
Do not use a steel wool pad; it will scratch the surface. To clean the
stainless steel surface, use warm sudsy water or a stainless steel cleaner or
polish. Always wipe the surface in the direction of the grain. Follow the
cleaner instructions for cleaning the stainless steel surface. Cleaners with
oxalic acid such as Bar Keepers Friend Soft Cleanser™ will remove surface
rust, tarnish, and small blemishes. Use only a liquid cleanser free of grit
and rub in the direction of the brush lines with a damp, soft sponge.
To inquire about purchasing stainless steel appliance cleaner or polish, or to find the location of a dealer nearest you, please visit monogram.com
LIGHTBAR
To change the lighting bar, schedule a service appointment. See the Consumer
Support page in the front of this manual for a list of websites and contact
information.
TROUBLESHOOTING TIPS
Save time and money! Review the charts on the following pages first and you may not need to call for service.
Problem | Possible Cause | What To Do |
---|---|---|
Fan/Light does not operate when the button is turned ON | A house fuse may be | |
blown or a circuit breaker tripped. | Replace fuse or reset circuit breaker. | |
Loud or abnormal airflow noise | Wrong duct size used in the installation. |
This hood requires 10″ ducting to perform optimally. Using smaller duct pipe
will cause reduced venting. Minimize the duct run length and number of
transitions and elbows. Monogram service technicians cannot correct this issue
if installed improperly.
Fan fails to circulate air or moves air slower than normal and/or
fan is making loud or abnormal airflow noise| Obstructions in the ductwork.|
Make sure nothing is blocking the vent. Make sure your wall or roof cap has a
blade or door.
Damper blade on the wall or roof cap may not be open.| Make sure the damper
swings freely. Damper blades may flip over and will not fully open when this
happens. Adjust to the original position.
Metal baffle filter and charcoal filter (if present) may be dirty.| Clean the
metal baffle filter. See Care and Cleaning section of this manual.
Insufficient makeup (replacement) air| Sufficient makeup (replacement) air is
required for exhausting appliances to operate to rating. Check with local
building codes. which may require or strongly advise the use of makeup air.
Visit monogram.com for available makeup air solutions.
Fan keeps going off and on| The motor is probably overheating and turning
itself off. This can be harmful to the motor.| Check to be sure the filters
are clean. If off and on cycling continues. call for service.
Hood will not work remotely| Router issues, no wireless signal. etc.| For
assistance with hood wireless network connectivity. please call
800-444-1845 or visit our websa• at
monogram.com/contact
Hood is not connected,
ACCESSORIES
Looking For Something More?
Monogram offers a variety of accessories to improve your cooking and
maintenance experiences!
Refer to the Consumer Support page for website information.
The following products and more are available:
Parts
Baffle
Drip Tray
Duct Covers
Remote Control
Back Venting Damper
Backsplash Kit
Power Cord Kit
Cleaning Supplies
CitruShine™ Stainless Steel Wipes
Stainless Steel Appliance Cleaner
Bar Keepers Friend Soft Cleanser™
MONOGRAM LIMITED WARRANTY
Monogram.com
All warranty service is provided by our Factory Service Centers or an
authorized Customer Care ®technician. To schedule service online, visit us at
monogram.com/contact.
For the period of | Monogram Appliances will replace |
---|
Two years
From the date of the
original purchase| Will provide, free of charge, parts, and service labor in
your home to repair or replace any part of the vent hood that fails because of
a manufacturing defect
What Monogram will not cover:
- Service trips to your home to teach you how to use the product.
- Replacement of house fuses or resetting of circuit breakers.
- Failure of the product if it is used for other than its intended purpose or used commercially.
- Improper installation, delivery or maintenance.
- Replacement of the replaceable filters.
- Damage to the product caused by accident, fire, floods or acts of God.
- Incidental or consequential damage caused by possible defects with this appliance.
- Damage caused after delivery.
- Product not accessible to provide required service.
- Installation or service for a makeup (replacement) air system.
EXCLUSION OF IMPLIED WARRANTIES
Your sole and exclusive remedy is product repair as provided in this Limited
Warranty. Any implied warranties, including the implied warranties of
merchantability or fitness for a particular purpose, are limited to one year
or the shortest period allowed by law.
This limited warranty is extended to the original purchaser and any succeeding
owner for products purchased for home use within the USA. If the product is
located in an area where service by a Monogram Appliances Authorized Servicer
is not available, you may be responsible for a trip charge or you may be
required to bring the product to an authorized Monogram Appliances Service
location for service. In Alaska, the limited warranty excludes the cost of
shipping or service calls to your home.
Some states do not allow the exclusion or limitation of incidental or
consequential damages. This limited warranty gives you specific legal rights,
and you may also have other rights which vary from state to state. To know
what your legal rights are, consult your local or state consumer affairs
office or your state’s Attorney General.
Warrantor: GE Appliances, a Haier company, Louisville KY,40225
Warrantor in Canada: MC Commercial Inc ., Burlington, ON L7R 5B6
Staple your receipt here. Proof of the original purchase date is needed to obtain service under the warranty.
49-2000705 Rev . 3
05-21 GEA
Printed in Italy
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>