HoomBand Wireless Bluetooth Innovative Headband User Guide
- June 7, 2024
- HoomBand
Table of Contents
Guide
HoomBand Wireless
Manifesto
We are Livlab, a team of insomniacs, designers, and entrepreneurs, whose
mission is to improve your sleep.
To assist us on this journey we surrounded ourselves with the best experts
(hypnotherapists, sleep doctors, sophrologists, and sound designers) with the
aim of creating a quality audio experience offering both variety and immersive
content to help you fall asleep.
As current audio devices available on the market are not well suited to sleeping (large headphones, and uncomfortable earbuds), we decided to create HoomBand, the most comfortable textile headphone on the market. Hoogland is more than just a pair of headphones it’s your new nightly ritual.
Setup
Anatomy
- Bluetooth® 5.0 (2402-2480MHz) and battery block
- Flat and ajustable earphones (frequency: 20Hz~20kHz / max power output: –1dBm)
- Thermoformed foam piece for comfort
- Stretchable and breathable textile (sizes and head circumferences: S 20-22”, ML 22-24”)
Battery charging
-
Open the hook at the back of the headband.
-
Plug the micro-USB cable (USB symbol facing you) into the micro USB port on the Bluetooth®
module (button facing you) -
Plug the micro-USB cable into the USB port on your computer or any USB wall adapter – a green light will blink during charging
-
It’s fully charged when the (buttons facing you). The green light disappears. We recommend charging after every use. Charging typically takes up to 2h.
Light signal
Sound signal
Low-battery sound
will be turned on once
5 minutes before the
product turns off.| •••
The Waiting-for-signal sound is repeated until HoomBand is connected to your
device
---|---
Earphones position
Turn the headband inside out to place the inner side facing outwards.
Remove the foam via the rear slot.
Adjust the position of the earphones according to your ears.
Adjust the position of the earphones according to your ears.
Pairing
You must be within 3 feet (1 m) of your device. Find the Bluetooth® module at the back of the headband
Hold down the button for 3s until you hear ascending tones through the speakers followed by double bleeps and blue light for 5s.
On your device, make sure Bluetooth® is turned on. Look for “HoomBand” and select to pair. Pairing may take up to 15s.
Usage
Turn on the headband by holding down the button of the Bluetooth® block.
HoomBand automatically connects to your device if it has been paired.
Open the HoomBand app downloaded from the App Store or Google Play.
Find yourself a comfortable place, choose the story of your choice, and place your smartphone on your bedside table. You can download the audio files and activate airplane mode to stay disconnected.
Questions
Can I wear HoomBand all night?
Yes, the headband was designed specifically to be worn all night long
(comfortable, breathable, etc). You can therefore sleep in whatever position
you like.
How should I set the volume?
We do not recommend using the highest volume setting, in order to avoid
damaging your hearing. The perfect volume is loud enough to hear the audio
content correctly, without it being so loud as to wake you up once you are
asleep.
I’m wearing HoomBand but I can still hear things around me, is this
normal?
Yes, the earphones are not in-ear and do not fully block your ears like other
headphones, this ensures a prolonged comfort during the night. It also means
that your ears are not blocked in the case of an emergency or a fire alarm.
Where should I focus my attention?
Part of your attention will automatically be focused on the sounds and
hypnotic inductions. It is best to adopt a passive attitude and to let
yourself go. This exercise is easy to do and requires almost no mental effort.
Should I try and stop thinking?
No, trying to stop your thoughts is counter-productive. Furthermore, your
thoughts are not the reason why you can’t fall asleep, your reaction to them
is. Because they are bothering you, you want to stop them. Since this attempt
is doomed to fail, it will only leave you feeling more frustrated…and less
likely to fall asleep ! With the help of our stories available on the HoomBand
app, you will be less caught up in your thoughts that will no longer hold you
back from sleeping.
Not sure if fully charged?
While charging, if the green light is blinking, the module is not fully
charged. If there is NO light on at all while charging, the Bluetooth® module
is fully charged.
Product care
Washing
(1) Before washing, remove the foam, the earphones and the Bluetooth® block from inside the headband. (2) Wash the textile by hand in warm water. (3) Once the headband is completely dry, insert the foam and the earphones back into the headband.
Battery
Autonomy of 12h. Be sure to recharge your product every two nights. No
worries, without music, the product automatically goes to sleep.
Warning
Do not use HoomBand or any of the HoomBand app content whilst operating a motorized vehicle or whilst in an environment where you are unable to hear outside noises that may endanger your own life or the life of others. At full volume, prolonged listening of audio content may cause damage to your hearing. Using Hoomband affects your ability to hear sounds from your surrounding environment at any volume. Please use with caution.
| Products manufactured after the 1st of January 2006 are not considered as
household waste. Please take to an approved electronic equipment recycling
facility.
---|---
| Disclaimer. Not for use for children under 3 years old. The length of the
cable presents a risk of strangulation. Small pieces may lead to choking.
| Please lower the volume before using to prevent hearing issues. Do not use
at a high volume for prolonged periods.
FCC Caution
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment. This
device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
IMPORTANT NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.
Warranty & conditions
Warranty
The Customer benefits from the warranty against hidden defects during two
years. Any return of the product under the above warranty must be with the
prior agreement of Livlab. In the event that a manufacturing defect renders
the Product unusable, the Customer may contact the Livlab After Sales Service
at support@mydodow.com. Livlab undertakes to
return free of charge the Product in good working order to the Customer, or a
replacement thereof. Should the product be out of stock or impossible to
repair, the Customer will be offered a replacement or a refund of the initial
Product. Any return of the product under the above warranty must be with the
prior agreement of Livlab. The defective product must be returned in its
original packaging, with all its parts and together with its accessories. Any
product, which is incomplete, damaged and/or the original packaging of which
has deteriorated, will not be taken back or exchanged under this warranty.
Conditions
The care and washing of the textile product is the responsibility of the
customer. In the case of shrinkage or loss of certain properties of the
textile from washing, the warranty will not be valid.
Contact
Do you have an idea, a suggestion, or do you just want to say hello? Feel free
to
email us: support@hoomsleep.com
Has HoomBand saved your nights? please share your experience and help us improve it. feedback@hoomsleep.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>