thermaltake Pacific Ultra Core P6 DP-D5 Plus User Manual
- June 3, 2024
- thermaltake
Table of Contents
thermaltake Pacific Ultra Core P6 DP-D5 Plus
INTRODUCTION
This product is intended for installation only by expert users. Please consult with a qualified technician for installation. Improper installation may result in damage to your equipment.
- Please carefully read the manual before beginning the installation process.
- It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000..
- DO NOT USE any kind of alcohol or alcohol derivatives with this reservoir or the acrylic tube may crack and fail ! Do not clean it using alcohol either.
Parts List
Installation
Mainboard SYNC installtation
CAUTION: Please power off the PC and check the Positive and Negative ends on the connector before connecting the cable to mainboard. Connecting the wrong end can damage the LEDs.
-
ASUS
Aura Addressable Strip Header(s) -
MSI
JRGB-strip Header(S) -
ASROCK
Addressable RGB LED Header(s) -
GIGABYTE
AOURS RGB Fusion with Digital LEDs
Controller Installation
-
Connect the reservoir cable onto the controller.
-
Set the DIP switch on the back side of the controller to assign the number of the controller
-
Connect the controller cable onto the mainboard (USB 2.0 9 pin) and controller.
-
Connect the power cable to the 4pin Molex connecter and controller.
-
If you want to connect two or more connectors, you can use the bridge cable to connect the controllers.
Scan Here
Documents / Resources
|
thermaltake Pacific Ultra Core P6 DP-D5
Plus
[pdf] User Manual
Pacific Ultra Core P6 DP-D5 Plus, Pacific, Ultra Core P6 DP-D5 Plus
---|---