KENT Elite Instruction Manual

June 7, 2024
Kent

KENT Elite - logo

KENT Elite

Instruction Handbook for Installation, Operation, and Maintenance.

KENT ELITE
ONLINE PURIFICATION FOR WATER COOLERS
Kent Deta Hai
Sabse Shudh Paani
Mineral RO™ TECHNOLOGY
Removes Dissolved Impurities Multiple Purification
RO+UF+TDS Control
Reverse Osmosis Water purifier + Ultra Fiction Purification + TDS Controller
Mineral RO™©2005 KENT RO SYSTEMS LTD, the process& purifier is patented vide patent no 199716

Dear Customer
Welcome to the world of KENT, leader of the water purification industry in India. With a KENT product you, have all the reasons to smile since at KENT we take pride in the quality and laboratory-tested performance of our products.
We are confident that your decision to own KENT Elite Water Puffier will go a long way in serving you with pure and mineral enriched drinking water, thus keeping you and your family in good health. We assure you, that you will be satisfied with its trouble-free performance and quality, which comes without any compromise.
This manual is an effort towards familiarising you with the operation and maintenance of KENT Elite. Before operating the unit, please read it thoroughly and retain it for future reference. Should you need further assistance, do not hesitate to contact your nearest KENT dealer or branch.
Best Wishes,
KENT RO SYSTEMS LTD.

KENT TECHNOLOGY – A Breakthrough in Water Purification

KENT proudly presents KENT Elite – a technologically advanced commercial water purifier based on the patented KENT Technology. The ground-breaking KENT Technology, developed at the KENT laboratory, broadly comprises of state-of-the-art RO+UF+TDS Control System. While the initial purification by RO membrane having porosity as fine as 0.0001 microns effectively removes even dissolved impurities (hard salts, heavy metals, etc.), the double purification by OF process ensures protection against bacteria and viruses. Moreover, the patented TDS Control System Intelligently retains essential natural minerals in purified water, thus taking total care of your health and well-being.

KENT Elite - In water purification

Salient Features of KENT Elite Water Purifier

■ Suitable for attachment to water coolers
■ Double Purification by RO and Hollow, Fibre OF Membrane effectively filter out bacteria, viruses, and cysts
■ Adjustable TDS Control System facilitates TDS adjustment in purified water
■ Fully automatic operation with auto-on and auto-off function
■ Tamper-proof RO/UF Membranes fused inside membrane housing

| ■ Push-fit components for leak-proof & maintenance-free performance
■ Horizontally mounted SMPS for protection against high voltage
■ ABS construction for corm:on-free life span
■ Suitable for Purification of Brackish/ Tap Water/Municipal Corporation Water
■ Filter change alarm to indicate filter replacement time
■ Inbuilt auto-flushing system
■ High flow membrane
■ High capacity of 40 Lehr*
---|---

**Items in the Box

**

1
2
3
4
5
6
7
8| KENT Elite Water Purifier
3-Way Connector
S.S. Ball Valve
Food Grade Pipe (Blue) 1/4 inch
Food Grade Pipe (White)             inch
Food Grade Pipe (White) % inch
Screws & Plastic Inserts
Warranty Card| 1N 1N
1N 2.5
meters
2.5 meters
2.5 meters
2 Numbers each
1N
---|---|---

Important instructions

KENT Elite - Inportant1| KENT Elite - Inportant2
---|---
KENT Elite - Inportant3| KENT Elite - Inportant3
KENT Elite - Inportant5| KENT Elite - Inportant6
KENT Elite - Inportant7| KENT Elite - Inportant8

Reverse Osmosis Process

Reverse Osmosis also known as Hyper Filtration, is the finest filtration process known to date. The process ensures the removal of particles as small as ions from a solution. The Reverse Osmosis process uses a semi-permeable membrane to reduce the dissolved salts from potable I brackish water.
In Reverse Osmosis, water pressure is applied on the inlet impure water resulting in 51((t into the squeezing of purer water from the concentrated end of the membrane towards the diluted end. Dissolved salts present in water as charged ions get repelled by the RO membrane and are not allowed to pass through. Similarly, bacteria and germs are also blocked by the ultra-fine pores of the RO membrane. These rejected impurities suspended on the concentrated end of the membrane are washed away in a stream of wastewater preventing the membrane from clogging.
KENT Elite 2+ Water Purifiers - Reverse Osmosis
Process

UF Process

KENT Ultra- Filtration is a separation process that uses a UF membrane with a pore size of 0.1-0.01 micron. This UF membrane has the capacity to remove colloidal materials Including bacteria, cysts,s and even viruses from drinking water. Low applied pressure is therefore sufficient to achieve high flux rates from an ultrafiltration membrane.
Auto-flushing System
The purpose of the Auto-flushing System Is to help prevent scaling or fouling of the RO membrane by providing a rapid rinse that washes away impurities from the membrane’s surface and keeps the membrane clean. It of fees following benefits:
■ Lowers outflow of rejected water.
■ Improves TOS rejection rate i.e increases RO membranes efficiency.
■ Extends life of RO membrane.

Water Flow Diagram

KENT Elite 2+ Water Purifiers - Water Flow Diagram

S.NO. SPARE PART CODE ITEM DESCRIPTION
1 20011 SEDIMENT FILTER
2 20035 LOW-PRESSURE SWITCH
3 20012 ACTIVATED CARBON FILTER
4 20673 CARBON BLOCK 10″
5 20028 SOLENOID VALVE
6 20006 BOOSTER PUMP
7 20034 TDS CONTROL VALVE
8 20529 RO MEMBRANE
9 20018 FLOW RESTRICTOR TUBE
10 20004 OF MEMBRANE
11 20058 NON RETURN VALVE
12 20036 HIGH-PRESSURE SWITCH (HPS)

The above specifications are subject to modification for improvement without notice

**Electrical Circuit Diagram

**

KENT Elite - Electrical

**Filter Change Alarm

**

KENT Elite Mineral RO™. Water Purifier has an in-built feature that sounds an audible alarm to indicate replacement time for filters. This alarm will be audible after 700 hrs of use since the last filter change (or since the time of installation). The Filler Change Alarm will sound as following: 4 short beeps after every two seconds, for 30 seconds. The alarm will repeat after every 2 hours of use.
KENT Elite - Electrical - IconbcIn case such an alarm is audible please call the service technician and request him to change the filters of the purifier. However, if the filters are not changed within the next 60 hours of opera lion, the purifier stops functioning to ensure purity and hygiene. The following alarm will be audible after 60 Hrs. A continuous beep for an infinite time.
In case, such an alarm is audible, kindly switch off the purifier and call the service technician to replace the filters. In such a circumstance, the purifier will not function unless the filters are changed.
Automatic Operation
■ The purifier automatically shuts off when the tank is full.
■ The purifier does not start when inlet water supply pressure falls below 0.3kg/cm2
■ The purifier automatically restarts when the water level drops below the maximum level
■ The purifier does not allow any water rejection in absence of electricity/when the tank is full
■ The purifier automatically flushes & cleans the RO membrane at periodic intervals

Installation Instructions
KENT Elite is designed to facilitate wall-mounting as well as counter-top purification. It is easy and convenient to install. Recommended Site Preparations:
■ Single-phase 100-250 V AC, 50-60 Hz. supply not more than 3m away from the point of installation
■ Raw water supply with ‘/2-inch nipple, not more than 3m away Drain for reject water not more than 3m away
■ Installation space as per the dimensions of the purifier
■ For proper installation, make sure that the purifier is mounted on a wall surface. Avoid installation on wooden and metallic stands
■ For optimum inlet pressure. source water tank should be at least 10 ft. above the purifier installed
Installation Procedure:

  1. Screw-in two 10×50 self-tapping screws, 234 mm apart horizontally.

  2. Wall-mount the purifier with the help of slot holes given on the backside.

  3. Fasten the SS ball valve to the inch port of the 3-way connector.

  4. Attach the threaded end of the 3-way connector to the raw water supply and plug off the other end or connect to a tap.

  5. Now connect one end of the white pipe to the SS ball valve and
    *Tested & Certified by TUV-SUD South Asia (P) Ltd.
    the other end to the lower elbow titling connector is labeled as WATER IN, on the bottom of the purifier.
    Use white pipe for raw water supply.

  6. Connect one end of the blue pipe to the upper elbow fitting connector labeled as REJECT WATER and lead the other end to drain.
    Use blue pipe for reject water.

  7. Connect the purified water pipe to the watercooler.

  8. Turn on the ever-given on SS ball valve to initiate the water flow to the purifier.

  9. Allow the filters to pre-soak in the water for 2-3 minutes.

  10. Connect the power supply.

  11. Installation is complete.


When the water coolers storage tank gets filled up completely the float in the cooler will cut off the RO purified water supply from KENT Elite. This will further create water pressure. In turn, the high-pressure sensor Installed in the machine will cut off the electric supply to the machine. The purification of KENT Elite will automatically start again as soon as the water level drops.

TDS Adjustment

The unique TDS Controller enables customers to retain the contents of natural minerals in purified water. as per the requirement.
• Turning the screw of the valve anti-clockwise, results in an increased mineral content
• Turning the screw of the valve clockwise, results in a decreased mineral content
We recommend keeping the TDS at the lowest possible level but not below 50mge.

Starting-up the Purifier

■ Switch on the power supply
■ Allow water to fill to the maximum level
■ Switch off the power supply| ■ Open the faucet and drain water to remove residual dust particles present in the pipes and tank
■ Close the faucet and switch on the power supply
■ The purifier is ready to use
---|---

Recommended Usage of Rejected Water

Although the rejected water has a high concentration of salts, it is absolutely clean and free from impurities like chlorine, dirt. sand, etc. This rejected water usually goes down the drain but can be used for gardening purposes. The high concentration of salts and minerals accelerates plant growth. Rejected water can also be used for cleaning utensils. mopping etc.

Maintenance

To ensure that the purifier operates at its BEST, routine maintenance must be performed. The frequency of the maintenance will greatly depend upon the raw water quality and consumption of purified water

■ The tank must be drained and cleaned once every 15 days
■ Replace RO membranes once a year
■ Replace OF membrane once a year| ■ Replace sediment filter, activated carbon filter once In a year or earlier If they get clogged. It is recommended to change FRT along with the filters
---|---

Please note that the replacement time of consumables such as filters and membranes is dependent on the quality of raw water and the quantity of water consumed.

Recommended Frequency for Filters/Membrane Change

For optimum performance we recommend the following frequency for the replacement of cartridges:

Sediment/Activated Carbon
RO/UF Membranes| Once in a year or earlier if they get clogged
Once in a year or earlier if they get clogged
---|---

Important Safety Instructions

■ If the supply cord is damaged it must be replaced by the original part in order to avoid a hazard
■ Children should be supervised to ensure that they do not play with the appliance
■ This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety

Technical Specifications

Product|

KEN ELITE

---|---
Product Code| 11008
Product Generic Name| Water Purifier
Product Colour| White
Application| Suitable for Purification of Brackish/Tap Water
Installation| Suitable as an attachment to water coolers Municipal Corporation Water
Body Material| ABS Food Grade Plastic
Mounting| Wall-mounted
Purification Production Rate| 40 LAC
Max. Duty Cycle| 200 L/Day
Filter Cartridge| Sediment, Activated Carbon
Membrane Type| Thin Film Composite RO (2)
OF Membrane| 0.1 — 0.01 Micron
Auto Flushing System| Yes
Inlet Water Pressure/Temp (Min.)| 0.3 kg/cm2/10°C
Inlet Water Pressure/Temp (Max.)| 4 kg/cm’/40°C
Min./Max. Operating pH| 6.5-8.0
Booster Pump Voltage| 24 V DC
Total Power Consumption| 60 W
Dimension (mm)| 415 (L) x 222 (W) x 410 (H)
Net Weight| 14.20 Kg
Input Power Supply| Single Phase 100-250 V AC, 50-60 Hz. Ci
IP Rating| IPX1

*Purification capacity tested on raw water with a TDS level of 750 ppm at room temperature
Testing Information The System has been tested according to IS 10500:2012 (Standards for drinking water as per Bureau of Indian Standards) for the reduction of hazardous substances.

*To request for service 24×7, download KENT Service App

https://www.kent.co.in/customerapp
by scanning the QR code or by giving a missed call: 9212252852
To speak to customer care executive call: 92-789-12345

KENT Elite 2+ Water Purifiers - Icon 2Marketed by:
KENT RO SYSTEMS LTD
E-6, 7 & 8, Sector-59, Noida, U.P.-201 309, India.
E-mail: sales@kent.co.in I Website: www.kent.co.in
Manufactured by:
KENT RO SYSTEMS LTD

  1. Khasra No. 93, Village-Bantakhedi, Tehsil-Roorkee, District-Haridwar, Uttarakhand-247 668, India.
  2. A-6, Sector-87, Noida-201 305, U.P, India.
    For customer complaints, contact our Customer Care Officer at:
    E-6, 7 & 8, Sector-59, Noida, UP-201 309, India. Call: 92-789-12345
    E-mail: service@kent.co.in or visit us at www.kent.co.in

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals