soundcore A3028 Life Q30 Hybrid Active Noise Cancelling Headphones User Manual
- June 7, 2024
- Soundcore
Table of Contents
soundcore A3028 Life Q30 Hybrid Active Noise Cancelling Headphones User
Manual
Charging
- Fully dry off the USB port before charging.
- Use a certified USB-C charging cable and charger to prevent any damage.
- Do not power on your headphone while charging.
| Flashing red once every 60 seconds| Low battery
---|---|---
| Steady red| Being charged
| Steady white| Fully charged
Powering On/Off
Press and hold the power button for 3 seconds to power on/off
Bluetooth Pairing
- When powered off, press and hold the power button for 5 seconds until the LED flashes blue to enter the Bluetooth pairing mode.
- Select “Soundcore Life Q30” on your device Bluetooth list to connect.
| Flashing blue| Bluetooth pairing
---|---|---
| Steady blue| Bluetooth connected
Pairing with another device
When successfully connected with the first device, press twice the power
button to pair up with another device.
- Your Soundcore headphone can only play music on one mobile device at a time. To play from another connected device, pause the device that’s currently active first.
- Each time you power on your Soundcore headphone, it will automatically connect to your last successfully connected device if available within the Bluetooth range.
Button Controls
Play/Pause| | Press
Next track| | Press and hold for 1 second
Previous track| | Press and hold for 1 second
Volume up/down| | Press
Answer/End a call| | Press
Put the current call on hold and answer a new incoming call
Reject a call| | Press and hold for 1 second
Switch between held call and active call
Activate Siri or other voice assistant software| ****| Press and hold for 1 second
NFC Mode
Near Field Communication (NFC) is a technology that enables short range wireless communication between various NFC compatible devices, such as mobile phones and IC tags. If your Bluetooth device supports NFC, you can connect it with your headphone easily.
- Enable the NFC feature on your Bluetooth device (iOS devices excluded).
- Tap the right panel of your headphones with the back of your Bluetooth device
Noise Cancellation Mode
To reduce ambient noise, turn on the active noise cancellation mode by
pressing the NC button. Press the NC button again to turn off.
Transparency Mode
To stay aware of your surroundings by allowing ambient sounds in, touch the
right panel for 1 second to activate the transparency mode.
AUX Mode
Play audio on an external device by plugging in a 3.5mm AUX cable
- When the headphone is out of battery, you can still listen to music but ANC mode is unavailable
Soundcore App
Download the Soundcore app to enhance your experience.
EQ settings: There are more than 20 EQ settings you can choose from in
the app to optimize your experience while enjoying different music genres.
Noise cancellation: Choose an active noise cancellation mode to reduce
ambient noise according to your surroundings.
- Transport: Targets low-end frequencies like engine and road noise for peaceful journeys and
- Outdoor: Reduces ambient sounds in cities for less
- Indoor: Reduces voices and mid-frequency noise from coffee shops and other inside spaces.
Transparency: Stay aware of your surroundings by allowing ambient sounds
in.
White noise soundscape: Tailor your own white noise soundscape when
you need to rest.
Firmware update: You will be informed once the new version of firmware is
detected when you connect the headphones with the app.
Google Play and the Google Play logo are trademarks of Google Inc.
Apple and the Apple logo are trademarks of Apple Inc.
Reset
You might need to reset your headphone if you experience any connectivity
problems or function issues.
Press and hold the power button and volume up button simultaneously for 5
seconds until the LED indicator flashes blue and red alternately twice.
Specifications
Specifications are subject to change without notice.
Input
|
5V 0.65 A
---|---
Charging Time
| 2 hour
Playtime (With ANC mode turned on)|
40 hour
Playtime (With ANC mode turned off)
| 60 hour
Device Size|
40 mm × 2
Frequency Response
| 20 Hz-20 kHz (Bluetooth)
16 Hz-40 kHz (AUX)
Impedance|
16 Ω
Bluetooth Version
| V5.0
Bluetooth Range|
15 m / 49.5 ft
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>