brondell 700BB Pro Sanitizing Air Purifier Owner’s Manual
- June 7, 2024
- brondell
Table of Contents
**brondell 700BB Pro Sanitizing Air Purifier Owner’s Manual
**
AIR PURIFIER AND ACCESSORIES
Power Cable with Plug
Pro Sanitizing Air Purifier with AG+ Technology by Aurabeat
PRODUCT FEATURES
QUICKSTART GUIDE
-
Carefully unpack your air purifier.
-
Remove the front panel.
-
Remove filters from protective plastic wrap.
-
Insert the Nanocrystalline Filter.
-
Insert the High Efficiency Antiviral Air Filter with Pre-Filter.
-
Insert the front panel.
-
Plug the power cable to the air purifier.
-
Insert the power cable into an electrical outlet.
-
Press on/off button to switch on the air purifier.
PRECAUTIONS
WARNING
Disassembly is prohibited. To avoid danger, do not disassemble and modify the product.
Check the power cable and plug
regularly. Dust can accumulate over time on the surface of the plug, which can
cause poor insulation due to humidity. Unplug it regularly and clean the plug
with a dry cloth. Unplug it from the electrical outlet when not used for a
long time.
Do not use on improper AC. Damage or danger can result from using it on improper power sources.
The electrical plug must be
plugged in all the way. Otherwise, fire hazards can result from overheating
due to exposed plug prongs. Do not use a damaged plug or a loose electrical
outlet.
Do not use the appliance in wet or highly humid surroundings such as the bathroom to prevent leakage current, electric shock and fire hazards.
Do not use the appliance when you have used spray-type insecticides. After using insecticides, ventilate the room suffciently before using the air purifier. Otherwise, chemicals will accumulate inside the machine and affect your health.
Do not use alcohol or organic solvents to clean any part of the appliance to prevent damage to the product, electric shock, fire hazards, etc.
Do not use the appliance near fire or combustible materials.
To avoid electric shock or damage, keep foreign objects away from the air inlet and outlet to avoid contact with the inner parts of the appliance.
Always unplug the air purifier before cleaning the unit to protect against injuries and danger.
To avoid electric shock, do not touch the electrical plug with a wet hand.
To prevent short circuit and electric shock, do not immerse in water or other liquids.
Do not use in places with oily residues, smoke, or fumes, such as the kitchen to prevent damage to the product. The appliance shall not be used as an exhaust fan.
When used in the same space with combustion devices, make sure the room is well-ventilated to prevent carbon monoxide poisoning as the appliance does not remove carbon monoxide.
Unplug the appliance by pulling
the plug but not the cable to prevent damage to the cable, short circuit,
electric shock, fire hazards, etc.
Close doors and windows for
efficient and rapid air cleaning.
NOTE
Unplug immediately if any of the following conditions occur:
- the switch does not work
- short circuit
- the electrical cable or plug becomes overheated
- a burnt smell, unusual sound or vibration is produced
- any unusual occurance or failure
Note: If the electrical cable is damaged, to prevent hazards, it must be replaced by authorized manufacturer personnel.
OPERATING INSTRUCTIONS
Switch on
Touch the power button to switch on the appliance.
After switching on, the light indicator is always on. When a corresponding
function is used, the light indicator under the icon is always turned on. The
area displaying “— — —” 10s after switching on will show the PM2.5 value.
The appliance operates under the auto mode by default.
The airflow is adjusted according to PM2.5. Auto mode is set as follows:
PM2.5 Value
|
Air Quality Level
|
Air Quality Light Color
|
Airflow Level
---|---|---|---
10-79| Good| Green| 1
80-199| Fair| Blue| 2
200-500| Bad| Red| 3
Changing fan speed
Touch the “Fan Speed” button repeatedly to disable auto mode and manually
change the speed among three settings (speeds 1-3). You can reselect auto mode
by touching the button after speed 3.
Set the timer
Touch the “Timer Button” repeatedly to choose the number of hours you want the
appliance to operate (1-12 hours) and the switch-off time. When the timer is
on, the light indicator is on.
Use sleep mode
- Touch the “Sleep” button to enter sleep mode. The air quality indicator will be dimmed. All the light indicators will be off except the sleep indicator.
- The appliance operates under speed 1 in sleep mode. Disable sleep mode and return to previous setting by touching any button.
Use UV
- Touch the “UV” button to turn on/off the UV light.
Set the child lock
- Touch the “Child Lock” button to activate the lock function and all the other buttons will not be responsive. Press and hold for 3 seconds to close.
- When the child lock is not on, press and hold this button for 3 seconds to view the accumulated usage time of the filter, displayed in the PM2.5 area. The filter indicator is on and the four-digit number is displayed.
Switch on plasma
- Touch the “Plasma” button turn on/off the plasma function.
Tips on replacing the filter
To review the usage status of the filters at any time, press and hold the
Child Lock button when the child lock is turned on. The accumulated number of
hours the filters have been in use will display for 10 seconds. When filter
usage reaches 2000, the replacement filter icon will illuminate.
Check the High Efficiency Antiviral Air Filter. If it is white or light grey,
you can reuse it for another 2000 hours. If it is dark grey or black, you need
to replace it.
Follow the guidelines for filter cleaning or filter replacement.
To reset the timer, press and hold the Timer button for 3 seconds.
-
Open the front panel and remove the existing filters
-
Insert the Nanocrystalline Filter
-
Insert the High Efficiency Antiviral Air Filter with Pre-Filter
-
Insert the front panel and the filter is successfully replaced
Filter installation order
- Nanocrystalline Filter
- High Efficiency Antiviral Air Filter with Pre-Filter
AIR PURIFYING FUNCTIONS
- Pre-Filter: captures hair, fiber, large particles, dander, etc., can be vacuumed and reused.
- High Efficiency Antiviral Air Filter: This filter is an H12 HEPA Grade filter, good at capturing small particles. It has low penetration, large capacity for holding dust, high clean air delivery rate can effectively filter smoke and dust, especially for PM2.5, effciently filtering particles as small as 0.01μm. The filter is coated with a proprietary patent-pending formula that can effectively kill human coronavirus, general virus, bacteria and mold.
- Nanocrystalline Filter: Sepiolite, diatomaceous earth, and other natural rare non-metallic minerals are used to make nanocrystalline materials which clear harmful gases, formaldehyde, benzene, VOC and other smelly pollutants. The nanocrystalline materials have many pores, good at absorbing nanoparticles, such as formaldehyde, ammonia, and benzene (between 0.4-0.62 nanometers). As these compounds are nano-sized polar molecules, they can be quickly absorbed.
- UV light: UV lamp helps to destroy virus and bacteria inside the machine.
- Plasma purification: The positive and negative ions generated by the plasma generator neutralize in the air and produce huge energy, which results in the change of the microorganism structure around or the conversion of energy, thereby destroying the microorganisms. As the number of negative ions is greater than that of positive ions, excess negative ions are still floating in the air, which can remove smoke, dust, smell, and improve air quality and health.
TECHNICAL SPECIFICATIONS
Type
|
Specifications
---|---
Product Name| Brondell Pro Sanitizing Air Purifier with AG+ Technology by
Aurabeat
Model| P700BB, P7004C, APP60
Voltage| 110-120V
Frequency| 50Hz/60Hz
Power| 95W
CADR| 221
Filtration grade| H12 HEPA Grade
Room Coverage| 538 Sq Ft
Casing Material| High Quality ABS
Airflow| 247.2 ft3/min (CFM)
Dimension| 24.7 in x 15.4 in x 8.3 in
Weight| 19.2 lbs.
Sensor Type| PM2.5 Sensor
Max. Noise| ≤62dB
CLEANING AND MAINTENANCE
Unit: Please regularly wipe the surface of the machine with a soft cloth
moistened with clean water and detergent and clean the air inlet and outlet
with a brush.
Sensor Cleaning: Regularly clean the lens of the sensor and the surface of the sensor with a moist cotton swab, and then use a dry cotton swab to remove any moisture left on the sensor.
Filter Replacement: A built-in program notifies when the filter needs
replacement. When usage reaches 2000 hours, the filter replacement indicator
icon will illuminate
. In extremely poor air quality, it may be time to change the filters, but
often cleaning the air filters and machine will suffice. Each layer of the
filter can be used for about 6-8 months. Clean the filters regularly to ensure
best performance.
Pre-Filter: clean with vacuum cleaner .
Nanocrystalline Filter: expose to sunlight for 1-3 hours every 2 months.
TROUBLESHOOTING
When the following problems occur, try possible solutions listed below before returning it for repair:
| Problem | Solution |
|---|
The appliance does not work when switched on.
The touchscreen controller does not work.|
- Check if the electrical cable is plugged into a socket.
- Check if the electrical cable is plugged into the appliance.
- Check if the front panel is inserted properly.
When in auto mode, the air quality indicator / PM2.5 value is always red or high.|
- The appliance may be affected by moisture, oil residues, smoke, fumes, spray, etc. Place the appliance in another environment to test again. 2. Take off the lid on the sensor and clean the lens with a soft cloth.
Unpleasant smell cannot be removed.|
- Check if the filter is expired or has adsorbed pollutants with bad smell. 2. The Nanocrystalline filter can be reused after exposure to sunlight. If the problem persists, change the filter.
Particulates in the air cannot be removed. The appliance is extra loud when
running.| Use a vacuum cleaner to clean the pre-filter. If the problem
persists, change the filter.
The air purifier does not respond to air pollutants in the room.| The
appliance may be placed in the wrong place that prevents pollutants from
being absorbed. Place it in another spot or change to manual mode and
increase the fan speed to maximum.
For product support and assistance, please check our help center and support pages online at www.brondell.com or email us at support@brondell.com. We are here to help!
WARRANTY
Brondell products are backed by some of the most comprehensive warranties in
the industry. Brondell warrants that the Brondell Pro Sanitizing Air Purifier
with AG+ Technology by Aurabeat shall be free from defects in material and
workmanship under normal use and service.
Residential & Commercial Warranty for Brondell Silver Ion Plasma Sanitizing
Air Purifier with AG+ Technology by Aurabeat – 3-year limited warranty
. Includes Base Model numbers: P700BB, P7004C, and APP60
100% Coverage of defects or malfunctions of all electronic parts and labor for
the entire product excluding consumable filters for the first three years from
original date of purchase.
Exclusions and Limitations
- BRONDELL warrants its products to be free from manufacturing defects under normal use and service. This warranty is extended only to the ORIGINAL PURCHASER.
- BRONDELL’s obligations under this warranty are limited to repairs or replacement, at BRONDELL’s option, of products or parts found to be defective, provided that such products were properly installed and used in accordance with instructions. BRONDELL reserves the right to make such inspections as may be necessary in order to determine the cause of the defect. BRONDELL will not charge for labor or parts in connection with warranty repairs for the first full year from date of purchase on all products except those that may be subject to heavy commercial use limitations.
- BRONDELL is not responsible for the cost of removal, return (shipping) and/or reinstallation of products. This warranty does NOT apply to:
- Damage or loss which occurs during shipment.
- Damage or loss sustained through any natural or man-made causes beyond the control of BRONDELL, including but not limited to fire, earthquake, floods, etc.
- Damage or loss resulting from negligent or improper installation including installation of a unit in a harsh or excessively hazardous environment
- Damage or loss resulting from removal, improper repair, modification of the product, or improper maintenance including damage caused by improper cleaning and exchanging of filters.
- Damage or loss resulting from acts which are not the fault of BRONDELL or which the Product is not specified to tolerate.
- Normal wear and tear usage on the appliance or damages and wear to the filter during use or maintenance.
- This warranty gives you specific legal rights. You may have other rights which vary from state to state.
THIS WRITTEN WARRANTY IS THE ONLY WARRANTY MADE BY BRONDELL. REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY SHALL BE THE EXCLUSIVE REMEDY AVAILABLE TO THE PURCHASER. BRONDELL SHALL NOT BE RESPONSIBLE FOR LOSS OF USE OF THE PRODUCT OR FOR OTHER INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGES OR EXPENSES INCURRED BY THE PURCHASER OR FOR LABOR OR OTHER COSTS DUE TO INSTALLATION OR REMOVAL OR COSTS OF REPAIRS BY OTHERS, OR FOR ANY OTHER EXPENSE NOT SPECIFICALLY STATED ABOVE. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTIES, INCLUDING THAT OF MERCHANTABILITY, ARE EXPRESSLY LIMITED TO THE DURATION OF THIS WARRANTY. SOME STATES DO NOT ALLOW LIMITATIONS, SO THE ABOVE LIMITATION AND EXCLUSION MAY NOT APPLY TO YOU.
How to Obtain Service
To obtain repair service under this warranty, you must contact an authorized Brondell Service Center to obtain an RMA (Return Merchandise Authorization) number. Proof of purchase in the form of a copy of the original receipt must accompany the returned unit for the warranty to be valid. Take or ship the unit pre-paid to the closest Brondell authorized service center along with the RMA number and proof of purchase. To obtain an RMA number, contact the Brondell Service Center at 1-888-542-3355 or by email [email protected].
