CTA PAD-ADMA Articulating Desk Mount Arm with PAD-VTH Tablet Instruction Manual
- June 7, 2024
- CTA
Table of Contents
Articulating Desk Mount Arm with PAD-VTH Tablet
Instruction Manual
PAD-ADMA
-
Base mount installation variety**** of Mounting Installations
Illustrated Below
-
- Arms Installation
Base mount
security
- Arms Installation
Changing 2 in 1 C-Calamo to grommet
- Pad installation Normal Type Installation
Caution: Claws can only be adjusted in the “unlock” situation do not try to adjust the claws in the ‘lock” situation.
An Unlock
B Extend each claw by
C Place device onto
D Lock the claw by turning to pull outward the loosened claw. the switch lock then pushes back the claw to hold the device.
Security Type Installation
Caution: Claws can only be adjusted in the “unlock” situation do not try to
adjust the claws in the “lock” situation.
A Use key to unlock the
B Unlock the claw lock
C Pull out each fixed claw security lock to extend the position
D Place pad product
E Lock the claw by switch lock then push the claw toward PAD to fixed pad
product, lock security lock by push the knob
Additional EVA cushion available in the package for thinner devices
- TENSION ADJUSTMENT Caution
All products are adjusted to the most suitable tension before leaving the factory, do not alter unless necessary. Screw! hinges on usage will loose, use the toolkit included to tighten them.
Each hinge of the product can be adjusted easily with, the tool kit included in the package
- Charging
Cable Route
36 Taaffe Place
Brooklyn, NY 11205