DIGITECH XC-5802 USB Retro Arcade Game Controller User Manual
- June 7, 2024
- Digitech
Table of Contents
USB Retro Arcade
Game Controller
User Manual
XC-5802
Product Diagram:
Operation:
-
Plug the USB cable into a PC, Raspberry Pi, Nintendo Switch, PS3, or Android TV’s USB port.
Note: This unit may only be compatible with certain arcade games because the games have different button configurations. -
The LED indicator will light up to indicate that it’s working.
-
If you’re using it on Nintendo Switch arcade games, ensure the “Pro Controller Wired Communication” has been turned on in the settings.
-
If you’re using this game controller with a PC, you can choose between D_Input and X_Input modes. Press the – and + button at the same time for up to 5 seconds to change the mode.
Turbo (TB) Function:
- Depending on which games are being played; you can press and hold the A button and then turn the TB (Turbo) button to on.
- Press and hold the A button and the TB (Turbo) button again to turn the function off.
- Pressing all 6 buttons can achieve turbo mode by the manual settings depending on the game type.
Note: Once the unit restarts; the turbo function will be turned off. You will need to turn on the turbo function again.
Safety:
- Do not pull apart the casing of the game controller to avoid damage and injury.
- Keep the game controller from high temperatures as it may cause damage to the unit.
- Do not expose the game controller to water, moisture, or liquids.
Specifications:
Compatibility: PC Arcade, Raspberry Pi, Nintendo Switch, PS3 Arcade & Android
TV Arcade
Connector: USB 2.0
Power: 5VDC, 500mA
Cable Length: 3.0m
Dimensions: 200(W) x 145(D) x 130(H)mm
Distributed by:
Electus Distribution Pty. Ltd.
320 Victoria Road, Rydalmere
NSW 2116 Australia
Ph: 1300 738 555
Int’l: +61 2 8832 3200
Fax: 1300 738 500
www.techbrands.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>