Soundcore B085C9ZGSG Trance Go Outdoor Bluetooth Speaker User Manual

Soundcore Trance Go
USER MANUAL

Charging

**Charge your Speaker

**

• Fully charge this speaker before the first use to prolong the lifespan of the built-in battery.
  | 4- Battery level <25%
  ---|---
  | Battery level 25% – 50%
  | Battery level 50% – 75%
  | 4-000 Battery level 75% – 100%
  | Fully charged

Check Battery Level

| Battery level <10%
---|---
| Battery level 10% – 25%
| Battery level 25% – 50%
| Battery level 50% – 75%
| Battery level 75’Y° – 100%

Charge your USB Devices
Charge your USB devices through the USB connector.

**Powering On/Off

**

• This speaker will power off automatically 30 minutes after no audio input or button inactivity.

**Using your Soundcore Trance Go

**

Bluetooth Mode

With this speaker, you can enjoy music through your Bluetooth-enabled devices.

| Press| Enter Bluetooth pairing mode
---|---|---
| Flashing blue| Bluetooth pairing
| Steady blue| Bluetooth connected

• Dual Bluetooth Connection: This speaker can pair up to 2 mobile devices via Bluetooth. To pair with another Bluetooth device, press the Bluetooth button to re-enter Bluetooth pairing mode.
• This speaker can only play music on one mobile device at a time. To play from another connected device, pause the currently active device first.
• Each time you power on your Soundcore speaker, it will automatically connect to your last connected device is available within the Bluetooth range. If not, press the Bluetooth button to enter Bluetooth pairing mode.

TWS (True Wireless Stereo) Mode
Two identical Soundcore Trance Go speakers can pair with each other for stereo sound.

1. On both Soundcore speakers, press and hold the Bluetooth button for at least 2 seconds to enter TWS pairing mode.
2. In TWS mode, connect either speaker with your Bluetooth-enabled device. The two speakers can play music on the left channel and right channel.

| Press and hold for 2 seconds| Enter TWS pairing mode
---|---|---
| Flashing white| TWS pairing
| Steady blue| TWS connected (Primary speaker)
| Steady white| TWS connected (Secondary speaker)

Party Cast Mode
Set up one Trance Go as the primary speaker and connect it with more than 100+ secondary Trance Go speakers to control audio and all the light modes.

1. Connect one Trance Go speaker to your Bluetooth device via Bluetooth.
2. Press and hold the PartyCast button for 2 seconds on multiple Trance Go speakers to enter PartyCast mode.
3. When successfully connected, the PartyCast LED on the primary speakers will continue flashing white, while on the secondary speakers will turn white.
   When PartyCast mode is successfully entered:

• You can power off, adjust the volume, or switch light modes for all speakers by controlling the primary speaker only.
• You can power off or switch light modes for each secondary speaker individually.
• You can’t adjust the volume for each secondary speaker individually.
• Any secondary speaker can be switched to become the primary speaker by pressing the PartyCast button and connecting to your smartphone. Any primary speaker can be switched to become the secondary speaker by pressing the PartyCast button and searching for an available primary speaker.
• To exit the PartyCast mode, press and hold the PartyCast button on any speaker for 2 seconds.

AUX/USB Mode
• When using AUX mode, control audio playback via the connected device.
Button Controls

| Press| Play/Pause
---|---|---
| Press twice| Next track
|  Press thrice| Previous track

— / +

| Press| Volume down/up
| Press|  Turn BassUp on/off
| Press and hold for 2 seconds modes| Switch between indoor/outdoor sound modes

Soundcore App

Download the Soundcore App for an enhanced product experience.

• Check product information
• Update firmware
• Indicate battery status
• Switch between indoor and outdoor sound modes
• Light DJ mode to support light and sound variation
• Enjoy party games
• Switch BassUp mode
• Remotely control the volume and play/pause
• Ser Auto-off time

**Specifications

**

Specifications are subject to change without notice

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>