ALTEC IMW1000 Hydra Mini Everything proof Wireless Speaker User Guide
- June 7, 2024
- Altec
Table of Contents
JUST LISTEN.
HydraMini Everythingproof™
Wireless Speaker
IMW1000
QUICK START GUIDE
In the Box
A Closer Look
Charging
Powering On/ Bluetooth Pairing
Speaker Controls
| PRESS | PRESS & HOLD (2 sec) |
|---|---|
| + | Volume Up |
| – | Volume Down |
| Play/Pause | – |
| Answer & End Call |
True Wireless Pairing
Turn on the first speaker and connect It with a Bluetooth-compatible device.
Turn on the second speaker and press the button.
Press and hold the button for 2-3 seconds on the first speaker.
The LED indicator on both speakers turns solid green once connected to each
other.
With the speakers connected, True Wireless uses the speaker as a left and right channel to create a cinematic experience.
- Disconnect TWS function: power off the unit *
Just Ask / Reset
Press
To activate JUST ASK (Siri or Google Assistant)
Reset- Press & Hold
Disconnect Bluetooth: Press and hold for five seconds and the speaker will beep
Reset All connections: Press and hold for ten seconds and the speaker will
power off
Overall battery performance varies depending upon use setting and
environmental conditions. For further information, please visit
www.alteclansing.com
Light Change Mode
To toggle between the different light modes:
- Multicolor slow transition
- Single color pulse to music
- Multicolor pulse to music
- Single color slow fade
- Single color
- Multicolor cycle changed
- Multicolor fast changed with background-color
- Multicolor slow fade
- Four color slow fade
- Four color rotation with a pulse to music
- Four color rotation
- Off
Press & Hold the button for 1-2 sec to change the Strobe light modes.
- off → Pulse to music → Blink → off *
FOLLOW US ON
#myaltecansing
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Sakar International Inc.
195 Carter Drive
Edison, New Jersey 08817, USA
855-292-4087
www.alteclansing.com