INSIGNIA 10-sheet Cross Cut Shredder User Guide
- June 7, 2024
- Insignia
Table of Contents
QUICK SETUP GUIDE
10-sheet Cross-Cut Shredder
NS-S10CCBK / NS-S10CCBK-C
PACKAGE CONTENTS
- Cross-cut shredder with a wastebasket
- Quick Setup Guide
FEATURES
- Shreds up to 10 sheets of paper at one-time
- Destroys credit cards, compact discs, small staples, and small paper clips
- Cross-cut size .2 × 1.4 in. (4 × 35 mm) protects sensitive data
- 5.6 gal (21 L) capacity basket holds shredded waste and is easy to empty
#| ITEM|
DESCRIPTION
---|---|---
1| Handle| Lets you easily lift up the shredder head to empty the paper inside
the wastebasket. Make sure that your shredder is turned off before you move
it.
2| Switch| FWD: Sends an item through your shredder. The POWER
indicator lights green.
Note. When you slide the power switch to
FWD, the cutters run forward continuously. To stop the cutters, you have
to move the switch to a different position.
We recommend that you only use FWD to make sure that the remaining paper
in the slot gets shredded or you want you clear the slot
AUTO: Automatically shreds an item when inserted into the shredding slot
The POWER indicator lights green. After shredding, the shredding stops
automatically.
OFF: Turns off your shredder.
REV: Reverses the paper in the slot to clear a jam or remove the
unshredded paper.
3
| LED indicators| Overheat Lights when your shredder has overheated. If
this indicator is on, the machine stops shredding and recovers when the
indicator is off. The cool-down time is at least 30 minutes.
Overload: Lights when trying to shred over the maximum 10 sheets or
when the paper is folded. In overload, the cutter tums off automatically.
Power. Lights when your shredder is in use.
Door open: Lights when the shredder head is not on the wastebasket or
when the head is not in the correct position on the wastebasket
4
| Shredding slot| Insert up to 10 sheets of paper at a time or one credit card or disc at a time.
5
| Window| Lets you see how much-shredded material is in the wastebasket
6
| Wastebasket| Holds the paper, cards, and discs that you have shredded. Empty the basket when it is 2/3 full.
SETTING UP YOUR SHREDDER
-
Place the wastebasket upright on a level surface.
-
Attach the shredder head to the basket. Make sure that it fits properly.
-
Place the wastebasket securely in the shredder.
Note: Do not use plastic bags to line the wastebasket. -
Connect the power cord to a power outlet. Do not use an extension cord.
USING YOUR SHREDDER
-
Unpack your shredder, then place it upright on a level surface.
-
Make sure that the shredder head is correctly fitted onto the basket.
-
Plug the power cord into a standard (120 VAC) outlet. Do not use an extension cord.
-
Slide the power switch to AUTO.
-
Insert paper (up to 10 pages) or one credit card or disc into the shredding slot. Your shredder automatically shreds what you insert.
Note: Don’t put envelopes, adhesive material, newsprint, transparencies, laminated documents, continuous forms, cardboard, or hard and plastic materials (except credit cards) through the shredder. You can shred small staples and small paper clips. -
If the shredder jams, slide the switch to REV to return the paper, then slide the switch to AUTO. The shredder can be used again if the jam is cleared.
-
When the wastebasket is 2/3 full, slide the switch to OFF, unplug the cord from the power outlet, then lift up and empty the wastebasket.
TROUBLESHOOTING
My shredder isn’t working
- Make sure that the power cord is plugged into a working power outlet. If the power cord is damaged, replace it.
- Make sure that the shredder head and wastebasket are positioned correctly.
- If the Overheat indicator is on, let it cool for at least 30 minutes. When the indicator is off, you can use your shredder again,
- Change the position of the paper as you insert it.
- The paper may be too thin or crumpled for your shredder to recognize. Fold the paper, then reinsert it.
- Slide the switch to FWD.
- Make sure that you only send 10 sheets of paper, one credit card, or one disc through your shredder at a time.
My shredder is jammed
- Slide the switch to REV, remove the paper from the cutter, then slide the switch to AUTO, and try again. The cutter won’t stop
- Slide the switch to OFF, unplug your shredder from the power outlet, then push the shredded paper down to make sure that it is away from the shredder head.
- Slide the switch to REV to remove the extra paper, disc, or credit card from your shredder. My shredder is too noisy
- Make sure that your shredder is on a flat, level surface.
- Make sure that the shredder head and wastebasket are positioned correctly.
The Overheat indicator is lit.
- Let your shredder cool for at least 30 minutes. When the indicator turns off, you can use your shredder again.
The Overload indicator is lit.
- Make sure that you haven’t put too much paper into your shredder at one time. Slide the switch to REV, remove the paper from the cutter, then try again with less paper.
SPECIFICATIONS
- Dimensions: 12.7 × 8.3 × 16.8 in. (32.2 × 21.2 × 42.6 cm)
- Cutting style: Crosscut
- Entry width: 8.6 in. (22 cm)
- Shred capacity: 10 sheets (75 g/m2 A4 paper) 1 disc or credit card
- Shred size: .2 × 1.4 in. (4 × 35 mm)
- Shred speed: 3 m/1 min.
- Duty cycle: 3 mins ON / 30 mins OFF
- Input: AC 120 V, 60 Hz, 4.5 A
- Net weight: 12 lbs. (5.5 kg)
- Basket capacity: 5.6 gals (21 L)
IMPORTANT SAFETY INFORMATION
Please read thoroughly
Before using the shredder, please read the guide and become familiar with the
safety information, operating instructions, and maintenance requirements.
Following all warnings and instructions in the guide and as marked on the
shredder. Do not attempt to service this unit by yourself. Doing so will void
the manufacturer’s warranty and may expose you to sharp cutting blades and/or
high voltage electric shock that could cause serious injury. Any repairs must
be performed by qualified service personnel.
| | 
| |
---|---|---|---|---
1. Read instructions before use| 2. Avoid loose clothing or jewelry touching
the document feed opening| 3. Avoid touching the document feed opening with
your hands| 4. Do not spray or keep any aerosol products in or around the
shredder| 5. Product is not intended for use by children (product is not a
toy)
| | | |
6. Avoid getting hair near the document feed opening| 7. Shredder oil only|
8. Sharp edges, do not touch| 9. This equipment is not intended for use by
children. Avoid touching the media feed opening with the hands, clothing, or
hair. Unplug this equipment when not in the use for an extended period of
time.| 10. Warning! Before switching the machine on, make sure that you
observe all safety
instructions
11. Keep in the OFF position when the shredder is not in use for prolonged
periods of time.
12. Empty wastebasket frequently.
13. The document shredder must always be deactivated and disconnected from
the electrical line prior to moving, transporting, and cleaning the device and
prior to emptying the wastebasket.
14. The device may not be operated with a damaged power cord.
15. For indoor use only.
16. To protect the machine well, we suggest the user operate it in this way:
work 3 minutes then rest 30 minutes.
17. The machine allowed max shred 10 sheets paper (75gsm) or 1 credit card or
1 CD at one time.
18. The socket outlet must be installed near the equipment and must be easily accessible during use.
LEGAL NOTICES
FCC Statement:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation. Changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to operate
the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment o and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit di erent from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
CAN ICES-3(B)/NMB-3(B)
ONE YEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call
1-877-467-4289 (U.S. and Canada) or
01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and it’s a listed company.
Distributed by Best Buy Purchasing, LLC 7601 Penn Ave South, Richfield, MN
55423 U.S.A.
©2020 Best Buy. All rights reserved.
V2 ENGLISH 20-0106
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>