noteit VYU-M1 Electronic EverMARKER User Manual
- June 7, 2024
- noteit
Table of Contents
VYU-M1 Electronic EverMARKER
“`html
Product Information
Specifications:
- Impression note: 1 electronic marker
- Type-C charger
- Quick Use Guide and Three Guarantees Certificate
Product Usage Instructions
Power On/Off:
a. Power On: When the battery is full, remove
the pen cap to turn on the device.
b. Shutdown: Insert the pen cap to turn off the
device.
c. Force Restart: When the device is turned on,
insert a sharp object into the forced reset hole to restart the
device.
Option Key:
This touch button allows for operations such as switching,
entering, and returning.
- Short press: Execute the Switch to Next Option command.
- Long press: Execute the Enter Current Options command.
- Press twice in a row: Execute the Return to Previous Menu
command.
Pen Tail Highlight Button:
This touch button is used to switch the highlighted color,
cancel the highlight, enter deep sleep, and wake up from deep
sleep.
-
Highlight Color: Press to switch between three
commonly used highlight colors. -
Deep Sleep: Press and release for more than 5
seconds to enter deep sleep. Press again to wake up.
Pen Side Line Feed Button:
Press this button twice in a row during scanning to start
scanning with a new line.
Forced Reset Hole:
a. When the device is on, insert a sharp object
to restart it.
b. If the device is unresponsive while off, use
the forced reset hole.
InnoMARKER Device Information Page:
To view device information, press the option button twice in a
row on the homepage.
Frequently Asked Questions (FAQ)
Q: How do I synchronize books to InnoMARKER?
A: To synchronize books, create or modify them in the Noteit app
and then sync them to InnoMARKER through the app.
Q: How do I delete books in InnoMARKER?
A: Delete books in InnoMARKER by synchronizing them to the
Noteit app and then deleting them within the app.
Q: How do I restore the factory settings of the device?
A: Long press the option button at the end of the device
information page to enter the format option, which can restore the
device to its factory settings with just one click.
“`
Noteit Electronic Markers User Manual
catalogue
List of accessories
How to use InnoMARKER
Power
on/off
option key
Pen
tail
highlight
button, pen
side line feed
button, forced
reset hole
InnoMARKER device
information page
connected to Noteit App
Shorthand notebook
Create/Modify Books
Synchronize books to
InnoMARKER book
excerpts/synchronize to Noteit
app to delete books in
InnoMARKER
Product parameters Frequently asked questions Safety precautions
List of accessories
Impression note: 1 electronic marker Type-C charger Quick Use Guide and Three
Guarantees Certificate
How to use InnoMARKER Power on/off
a. Power on
When the battery is full, remove the pen cap to turn on the device
b. Shutdown Insert the pen cap to turn off the device
c. Force restart When the device is turned on, insert a sharp object into the
forced reset hole to restart the device
Option key This is a touch button that allows for operations such as
“switching”, “entering”, “returning”, etc
a. Short press button Execute the “Switch to Next Option” command b. Long
press button Execute the “Enter Current Options” command c. Press twice in a
row Execute the “Return to Previous Menu” command
Pen tail highlight button This is a touch button that can be used to switch
the highlighted color of scanned content, cancel the highlighted color of
scanned content, enter deep sleep, wake up from deep sleep, and other
operations
a. highlight color Press the pen tail button to switch between three
commonly used highlight colors
When the pen tail light is on, the scanned content will have corresponding
marking colors in the electronic document
When the tail light of the pen goes out, the scanned content is unmarked in
the electronic document More colors can be connected to the Noteit app, and
modifications can be made in the “Settings” section in the upper right corner
of
the “InnoMARKER” entrance
b. Deep sleep Press and release the pen end button for more than 5 seconds,
and the device will enter a deep sleep state. At this time, the device will
run at the lowest power consumption When the device is in a deep sleep state,
pressing the pen tail button can wake up the device and enter the working
state
Pen side line feed button During the scanning process, pressing the newline
button on the pen side twice in a row can start scanning with a new line.
Forced reset hole a. When the device is turned on, insert a sharp object into
the forced reset hole to restart the device
b. The device is in a shutdown state and there is no response when inserting
the forced reset hole
InnoMARKER device information page
On the InnoMARKER device homepage, press the “option button” twice i n a row
to enter the “device information page”
Device homepage
On the “Device Information Page”, you can view information such as device
name, Mac address, device battery level, storage space, system version, etc.
(via SMS)
Press the “option button” to switch to the next item
Device Information Page
Long press the “option button” at the end of the “device information page” to
enter the “format” option, which can restore the device to its factory
settings with just one click After restoring the factory settings, all
unsynchronized information in the device will be cleared. Please operate with
caution
Long press the “option button” to enter the “format” option
Format Page
Connect to Noteit App Search for “Noteit” in the app store or scan the QR code
to download and install the latest version of the Noteit app, and open the
device’s Bluetooth
Impression Note APP Impression Note APP
a. Connect by scanning the Bluetooth Mac address When connecting for the first
time, InnoMARKER needs to be turned on, remove the pen cap and wait for the
screen to light up Open the Noteit app, click on the “InnoMARKER” entrance on
the homepage, and then click on the “Connect” button ->”Find Device” button
Click “Connect” to perform Bluetooth pairing and binding based on InnoMARKER’s
MAC address. (Reminder: MAC address can be viewed in the “Device Information
Page” of the InnoMARKER pen)
After successful pairing, enter the InnoMARKER homepage
b. Direct APP connection through “scan code connection” When connecting for
the first time, InnoMARKER needs to be turned on, remove the pen cap and wait
for the screen to light up Short press the “option” button inside the
InnoMARKER pen to switch to “Create Book”, then long press to access the QR
code for scanning connection Open the Noteit app, click on the “InnoMARKER”
entrance on the homepage, then click on the “Connect” button “Scan Code
Connection” button, align with the QR code displayed in the pen to scan the
code and connect directly
After successful pairing, enter the InnoMARKER homepage
Special reminder An InnoMARKER can only be bound to one Impression Note user account. The bound InnoMARKER needs to be unbound before it can be reconnected How to unbind: Go to the InnoMARKER homepage, click on “Settings” in the upper right corner, and then select “Delete InnoMARKER”
Shorthand notebook
a. InnoMARKER has a preset shorthand notebook by default. After removing the
pen cap and turning it on, it can be scanned directly, and the scanned content
will enter the shorthand notebook by default
b. You can also short press the option button on the InnoMARKER homepage to
switch to the shorthand notebook, and long press the option button to enter
the shorthand notebook and start scanning
Device homepage
c. In offline mode (when the elephant head symbol in the pen is displayed in
gray), the scanned data will be saved in the InnoMARKER pen. You can view all
the excerpted content by pressing the option button on the excerpt page length
of the shorthand notebook
Device homepage Offline copying completion prompt Long press the option button on the excerpt page to view the complete excerpt list Extract List Page When the connection is successful, the scanned content will be automatically synchronized to the app, and the list of handwritten excerpts will be empty d. After InnoMARKER successfully connects to the Noteit app (with the elephant head icon in the pen lit up), the scanned content will be synchronized to the Noteit app, and a note named “Shorthand Notebook” will be automatically generated Device homepage Extract completion prompt in connected state
Create/Modify Books
a. Need to connect to the Noteit app and create books on the homepage of
InnoMARKER software b. Click the “New” button in the “My Book Extracts” list
on the InnoMARKER homepage to enter the book creation page. Creating books
supports “search title”, “scan ISBN”, and “custom creation”
(i.e. quick creation) and other methods
c. After clicking the create button, complete the book creation. The book will
automatically be placed in the “My Book Picks” list
d. Click on the book in the “My Book Extracts” list to enter the corresponding
book’s book excerpt notes. Click on the book card at the top to modify the
relevant information of the book
Synchronize books to InnoMARKER
a. The created books can be synchronized toInnoMARKERbyselecting the desired
books through the “Sync” button. After synchronization is complete, you can
short press the option button on the homepage of InnoMARKER’s pen to switch
between viewing books
Display style of book titles within the device
b. At most 6 books can be synchronized at once. To improve reading efficiency,
we suggest reducing the number of synchronizations
c. Please do not close pop ups or exit pages during the synchronization
process
Book excerpt/sync to Noteit App
a. Short press the option button on the InnoMARKER homepage to select a book
b. After confirming the book, long press the option button to enter the book,
where you can scan and extract it
Long press the option button to enter the book
c. If you want the excerpted content to have corresponding page numbers, you
can successfully connect InnoMARKER to the Noteit app and turn off t h e “Skip
Page Number” switch in t h e “Settings” in t h e upper right corner of the
InnoMARKER homepage
After turning off “skip page numbers”, you can scan the page number where the
content is located before excerpting the main text, making it easy to quickly
locate the excerpted content in the book
Scan page numbers Extracted pages with page numbers
d. In offline mode (when the elephant head symbol in the pen is displayed in
gray), the scanned data will be saved in the InnoMARKER pen. After InnoMARKER
successfully connects to the Noteit App (with the elephant head icon in the
pen lit up), the scanned content will be synchronized to the Noteit App, and a
note with the corresponding book name will be automatically generated
e. In the books in InnoMARKER pen, offline scanning of excerpted content can
be done by long pressing the option button to view the complete list of
excerpts
Long press the option button on the excerpt page to view the complete excerpt
list Extract List Page
When the connection is successful, the scanned content will be automatically
synchronized to the app, and the list of handwritten excerpts will be empty
Delete books in InnoMARKER
a. Books that have been synchronized to InnoMARKER can be removed and managed
through the “Delete” button on the InnoMARKER homepage of the Noteit app b.
After successfully connecting InnoMARKER to the Noteit app, click the “Delete”
button and select the books that need to be removed from InnoMARKER.
After confirmation, the book will be removed from InnoMARKER’s pen, but it
will not be deleted from the “My Book Picks” list
c. During the process of removing books from InnoMARKER, please do not exit
the page or app
Product parameters
Product size
15mm
116.9mm
119.2mm
27.4mm
19.2mm
Product Name
Noteit Electronic Markers InnoMARKER
Product model
YX-M1
Main control
RK3326S
Main frequency quad core 1.5GHz
EMCP1750MB+8G
Bluetooth
CST92F25 SSOP16
System
Linux
Display screen
1.46 inch LCD
Camera
200W dedicated camera
Battery type
820mAh (rechargeable polymer battery)
Charging time is about 2 hours
Continuous scanning time of about 2 hours and 15 minutes
Pull out the pen cap, About 4 days from standby to shutdown
Off screen standby current 65 A
Power input
5V/1A
USBType-C
System Language Chinese
Scanning angle
0 ° -30 ° (0 ° when perpendicular to the desktop)
Scan font size
2 (22 points) -7 (5.5 points)
Switch type
Hall switch
Product materials: PC/ABS/POM/PVC,etc
The product weighs approximately 105g
Frequently asked questions
Problem Description and
cannot connect Noteit App
Solution
Confirm that the Bluetooth on the phone is turned on
Confirm that InnoMARKER is not connected to other Impression Note accounts
(bound InnoMARKERs need to be unbound before they can be connected to other
Impression Note accounts)
Confirm that the Mac address is correct (MAC address can be viewed in the “Device Information Page” of the InnoMARKER pen)
When scanning the QR code directly, if there is no response when scanning the QR code, you can use gestures to zoom in/out on the phone’s scanning page for adjustment
Unable to scan and recognize, adjust the grip angle to
0-30 ° and gently press the pen tip
Check if the current device is
in “left hand mode”
(preferred
scanning
direction can be found in the
InnoMARKER app)
Switch between “left and right
hand adjustment” on the settings
page
The recognition rate after scanning is too low
Confirm that the alignment line of the pen head is placed in the middle of the
text, gently press the pen head, turn on the light, and hold the pen to move
it to the right at a constant speed to scan
No response
How to perform firmware upgrades?
Sudden screen shutdown during use
How long does it take to charge? How long does it last?
InnoMARKER
Support for printed text recognition range: font size: 27 Fonts: Song
typeface, bold typeface, regular script
Languages (including italics and bold): Simplified and Traditional Chinese,
English
Chinese, Japanese, Korean
Support scanning recognition of electronic screens (including computer, mobile
and tablet screens, Kindle screens)
If the printing effect of printed text is poor, it will directly affect the
accuracy of recognition effect
Handwriting not supported
Scanning text with underline and shading is not supported
Scanning article titles that are too large is not supported; Does not support
scanning mathematical formulas, symbols, and pinyin
Scanning annotation circles to modify painted text is not supported
If the tail light of the pen is accidentally held down for a long time (more
than 5 seconds) during use, InnoMARKER will Enter deep sleep mode (screen
off), click on the pen tail light to wake up the device (The screen lights
up). It is recommended to avoid prolonged pressing of the pen tail light
during use
Please use the Type-C data cable standard with this product when charging (do
not use a fast charging cable) The charging time is about 2 hours, and it can
scan continuously for 2 hours after being fully charged; Pulling out the pen
cap, the standby to shutdown time is about 4 days
InnoMARKER is in the power on state, insert a sharp object into the forced
reset hole to restart the device (if the device is in the shutdown state, the
forced reset hole does not respond)
Ensure that InnoMARKER is connected to the Noteit app.
ClickonSetingsintheupper right corner of the InnoMARKER homepage Firmware
Upgrade – Check for Updates – Whether to Update – Whether to Upgrade (please
make sure to upgrade the firmware when the battery/memory is sufficient) –
After the upgrade is completed, click “Connect” to reconnect -After
successfulconnection,youcanreturn to Settings – Check if the version number is
the latest in Firmware Upgrade
Safety precautions
a. Please do not disassemble the Impression Note electronic marker without
authorization. If repair is required, please contact after-sales service
b. Please use this product within the temperature range of 0 -40 and keep it
at the appropriate temperature -Store equipment and its accessories within the
range of 10 -+60 . When the ambient temperature is too high or too low, it may
cause product malfunctions
c. Do not expose the product to high temperatures or around heating devices
such as heaters, microwaves, ovens, or water heaters. Battery overheating may
cause an explosion
d. When charging the device, the power socket should be installed near the
device and should be easily accessible. When charging is complete or not
charging, please disconnect the charger from the device and unplug the charger
from the power outlet
e. The device is equipped with a non removable built-in battery. Please do not
replace the battery yourself to avoid damaging the battery or device. If you
need to replace the battery, please contact customer service
f. Do not use this product in environments such as gas stations, fuel depots,
chemical plants, fuel or chemical transportation, or storage facilities, as it
may cause explosions or fires
g. Impression Note: Electronic markers belong to precision electronic
products. Please do not use chemical solvents or cleaning agents to clean this
product h. Please do not let children or pets
swallow this product or accessory to avoid harm to them
FCC Warnning: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection againstharmful
interference in a residential installation. This equipment generates, uses and
can radiateradio frequency energy and, if not installed and used in accordance
with the instructions, maycause harmful interference to radio communications.
However, there is no guarantee thatinterference will not occur in a particular
installation. If this equipment does cause harmfulinterference to radio or
television reception, which can be determined by turning the equipmentoff and
on, the user is encouraged to try to correct the interference by one or more
of thefollowing measures: · Reorient or relocate the receiving antenna. ·
Increase the separation between the equipment and receiver. · Connect the
equipment into an outlet on a circuit different from that to which the
receiver is connected. · Consult the dealer or an experienced radio/TV
technician for help.
Caution: Any changes or modifications to this device not explicitly approved
by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1)This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 0cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>