GLADIATOR GANA12SBMB Flex Tall Cabinet Storage Basket Instructions
- June 13, 2024
- GLADIATOR
Table of Contents
GLADIATOR GANA12SBMB Flex Tall Cabinet Storage Basket Instructions
Tools and Parts
Gather the required tools and parts before starting installation.
Tools Needed:
- 4mm Hex Wrench
Parts Supplied:
- Bracket(1)
- M6 x 16 hex socket head screw (4)
- Track (2)
Bracket Use Requirements
- Intended for use on Gladiator® Flex cabinet systems’ tall cabinet only.
- Maximum weight limit is 15 Ibs (6.8 kg).
Install the Basket
- Install two tracks (P1) to the tall cabinet’s shelf bottom in desired location (right, left or center) with four M6 x 16 hex socket head screws (F1).
- Attach the basket (P2) to the basket tracks installed already to the tall cabinet shelf’s bottom.
F1: M6 x 16 hex socket head screw
P1: Track
P2: Basket
WARRANTY
For warranty information:
In the U.S.A. call 1-866-342-4089 or
visit our website at
www.GladiatorGW.com
In Canada call 1-800-807-6777 or visit
our website at
www.gladiatorgarageworks.ca
Limited Lifetime Parts Warranty for metal parts.
The warranty excludes incidental / inconsequential damages and failure due to
misuse, abuse or normal wear and tear.
®/™ ©2022 Gladiator. All rights reserved. Used under license in Canada. Tous droits réservés. Utilisé sous licence au Canada. W11637534A Todos los derechos reservados. Usado bajo licencia en Canada.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>