Ethnicraft Make a Selection Revive Upholstered Bed Installation Guide

Ethnicraft Make a Selection Revive Upholstered Bed

HARDWARE ENCLOSED

TOOL REQUIRED

what is in the box

IN YOUR PACKAGE :

ASSEMBLY INSTRUCTIONS HARDWARE (AS LISTED ABOVE)

PARTS TO BE INSTALLED

1. HEADBOARD (1 pc)
2. SIDE RAILS (2 pcs)
3. FOOTBOARD (1 pc)
4. CENTRAL SUPPORT (1 pc)
5. SLATS (2 pcs)

SYMBOLS

NOTICE

ASSEMBLY INSTRUCTIONS

• INSTALLING METAL BRACKETS TO BOTH SIDE RAILS

  • USE METAL BRACKETS (4X)
  • USE SCREWS M6x25 (16X)
  • DO NOT TIGHTEN FULLY

• ATTACHING SIDE RAILS TO FOOTBOARD

  • USE SCREWS M6x25 (8X)
  • DO NOT TIGHTEN FULLY

• ATTACHING SIDE RAILS TO HEADBOARD

  • USE SCREWS M6x25 (8X)
  • DO NOT TIGHTEN FULLY

• ATTACHING LEG TO CENTRAL SUPPORT
  NOTE :
  USE SHORT OR LONG LEGS DEPENDING ON DESIRED L BRACKET HEIGHT – SEE STEP F FOR MORE DETAIL

  • HIGHEST L BRACKET LEVEL: LONG LEG
  • LOWEST L BRACKET LEVEL: SHORT LEG LE TRI REVIVE BED – WITH SLATS ASSEMBLY INSTRUCTIONS FOR BED INSTALLATION
  • USE SCREWS M6x25 (8X)
  • DO NOT TIGHTEN FULLY

• ATTACHING CENTRAL SUPPORT

  • TAKE EXTRA CARE TO ENSURE THE CENTRAL LEG S IN CONTACT WITH THE FLOOR

• ATTACHING L BRACKETS

  • ENSURE ALL L BRACKET LEVELS ALIGN WITH THE CHOSEN CENTRAL LEG HEIGHT

• ADJUST ALL SCREWS TO TIGHTEN

  • TIGHTEN FULLY FOR ALL SCREWS

• FITTING SLATS

• THE FRAME IS NOW READY TO FIT THE REMOVABLE FABRIC COVER AND PLACE MATTRESS

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>