Ethnicraft OAK X DINING TABLE Installation Guide
- June 12, 2024
- Ethnicraft
Table of Contents
Ethnicraft OAK X DINING TABLE
Product Information
| Hardware Included: | DIN 912 BOLT M6x30 (4 pcs), WASHER M6 (4 pcs) |
|---|---|
| Tools Required: | L KEY (included in package), SCREW DRIVER (not included in |
package)
Parts to be Installed:| 1. TABLE TOP (1 pc), 2. LEGS (2 pcs), 3. STRETCHER (1
pc)
ASSEMBLY INSTRUCTIONS FOR DINING TABLE INSTALLATION
HARDWARE ENCLOSED
TOOL
IN YOUR PACKAGE
ASSEMBLY INSTRUCTION HARDWARES (AS LISTED ABOVE)
PARTS TO BE INSTALLED
- TABLE TOP 1 pc
- LEGS 2 pcs
- STRETCHER 1pc
SYMBOLS
NOTICE
Product Usage Instructions
A. Installing Stretcher to the Legs:
- Attach the legs (2 pcs) to the stretcher (1 pc).
- Repeat the same step for the other leg.
- Do not tighten fully.
Note
- DO THE SAME STEP FOR THE OTHER LEG
- DO NOT TIGHTEN FULLY
B. Installing Legs to Table Top:
- Place the table top (1 pc) on a flat surface.
- Attach the legs and stretcher assembly to the tabletop using DIN 912 BOLT M6x30 (4 pcs) and WASHER M6 (4 pcs).
- Tighten fully.
Note
- USE DIN 912 BOLT M6x30 (4X)
- USE WASHER M6 (4X)
- TIGHTEN FULLY
C. Re-Tighten the Screw:
- Check all screws and bolts for tightness.
- Re-tighten any loose screws.
- Tighten fully.
Note
- TIGHTEN FULLY
D. Finish:
- The assembly of the OAK X Dining Table is now complete.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>