Ethnicraft ETH35135 Chopped Room Divider Instruction Manual
- June 1, 2024
- Ethnicraft
Table of Contents
Ethnicraft ETH35135 Chopped Room Divider
Product Specifications
- Product Model: 35135 CHOPPED ROOM DIVIDER – VARNISHED MAHOGANY LE TRI
- Material: Mahogany
- Assembly Type: Anti-tipping installation
- Recommended Depth: Minimum 20cm (8 inches) when opened
FAQ
- Q: What should I do if the depth of the installation is less than 20cm?
- A: To prevent instability, ensure the depth is no less than 20cm (8 inches) when opened. If the depth is insufficient, consider adjusting the installation position or using additional support.
HARDWARE AND TOOLS
HARDWARE ENCLOSED
TOOLS REQUIRED
(Not include in package)
IN YOUR PACKAGE
ASSEMBLY INSTRUCTIONS HARDWARE (AS LISTED ABOVE)
NOTICE
NOTICE
- TO PREVENT INSTABILITY, ENSURE THE DEPTH IS NO LESS THAN 20CM (8”) WHEN OPENED
SYMBOLS
INSTALLING INSTRUCTIONS
INSTALLING BUCKLES
- USE BUCKLES (x2)
- USE PAB SCREWS M4x3/4″ (x2)
- TIGHTEN FULLY
INSTALLING BELTS
- AS WALL MATERIALS VARY, THE SCREW INCLUDED ARE FOR BRICK WALL. FOR ADVICE ON SUITABLE SCREW SYSTEMS, CONTACT YOUR LOCAL SPECIALISED DEALER.
- MARK AND DRILL HOLES IN WALL ON THE SAME HEIGHT AS THE BUCKLES
- USE BELTS (x2)
- USE WALL PLUGS S8 (x2)
- USE PAB SCREWS M4x40 (x2)
- TIGHTEN FULLY
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>