Stauer 46480 1938 Gable Chronograph Watch Instruction Manual
- June 6, 2024
- Stauer
Table of Contents
AFFORD THE EXTRAORDINARY
Stauer 1938 Gable
Chronograph Watch
INSTRUCTION MANUAL
IMPORTANT
When resetting the chronograph, only return the crown (part B) to the normal
“0” (zero) position when the second hand (part F) is in the 12 o’clock
position. The second-hand stops when the crown is pushed into the “0” (zero)
position and that position is then recognized as the “0” (zero) position.
WATCH DISPLAY
A – Start/Stop Button
B – Crown
C – 24-Hour Dial
D – Split/Reset Button
E – Date Window
F – Second Hand
G – Chronograph Second Dial
H – Chronograph Minute Dial
TIME SETTING
TO SET THE TIME
- Pull the crown (part B) out to position “2” and rotate it to the desired time.
- Once the correct time is set, push the crown back into the “0” (zero) position. The Second Hand (part F) will start to run.
TO SET THE DATE
- Pull the crown (part B) out to position “1” and rotate it clockwise (away from you) to the desired date (part E).
- Once the correct date is set, push the crown back into the “0” (zero) position.
NOTE: The date should not be adjusted between the hours of 9 pm and 1 am.
USING THE CHRONOGRAPH
TO SET THE CHRONOGRAPH
This chronograph is able to measure and display time in 1-second increments up
to a maximum of 59 minutes (part H) and 59 seconds (part G).
- To start the Chronograph feature, press the Start/Stop Button (part A). To measure split times press the Split/Reset Button (part D) to stop counting.
- Press the Split/Reset Button (part D) to reset the chronograph, and the Second Hand (part F), the Chronograph Minute Dial (part H) and the Chronograph Second Dial part G) will all return to the zero position.
- For a split time, press the Split/Reset Button (part D) again after stopping the chronograph to restart the chronograph function. Then press the Start/Stop Button (part A) to stop, and the Split/Reset Button (part D) to reset.
CHRONOGRAPH RESET
Chronograph Reset (includes after replacing the battery)
- Pull the crown (part B) out to position “2”.
- Press the Start/Stop Button (part A) to set the Chronograph Second Hand (part G) to the zero position. The chronograph hand can be advanced rapidly by continuously pressing the Start/Stop Button (part A).
- Once the Chronograph Second Hand (part G) has been set to the zero position, push the crown (part B) back into “0” (zero) position.
Visit us at www.stauer.com to learn more about the
fantastic benefits of owning a Stauer Watch!
www.stauer.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>