ON AIR PodCast Series Selfie Tripod User Manual

ON AIR PodCast Series Selfie Tripod

INTRODUCTION & FEATURES

No matter where your content lives, the Selfie Tripod makes lye petrel photography and broadcasting companion. A durable and lightweight ABS design utilizes 3 flexible, rubber-lined legs phal can bend and rotate in any direction while your smartphone rests safely holstered on lop, controlled by an included Bluetooth shutter remote phal can be used up to 33 feet away. Designed for content creators, vloggers, and photographers looking lo create content on lye go or capture phal petrel angle – even on rough, uneven surfaces. Use it as a selfie stick, wrap it around objects, and have a stable smartphone setup wherever inspiration finds you.

PACKAGE CONTENTS:

• 1 x Selfie Tripod Stand
• 1 x Bluetooth Sheller Remote
• 1 x CR2032 Battery (In Until)
• User Manual

PRODUCT OVERVIEW & FUNCTIONS

• Flexible Legs Bend to Unlimited Shooting Angles
• Rubberized Feel Provide a Secure No-Slip Grip on Any Surface
• Lightweight & Folds Easily for Convenient Storage
• Record and Capture Images from 33 Fl. away with Bluetooth Shutter Remold.

USING YOUR SELFIE TRIPOD STAND

NOTE : This product will pair to any devices that utile size Bluetooth connection (version3.0ornewer)

STEP 1: CONNECT ALL PARTS.

• Take the smartphone holster and screw it onto lye mount base. (You may wish to remove the base in order to replace it will a camera or other base type/accessory.)
• If you need lo remove the holster base from the tripod for any reason, simply either press down on the flip lock lab lo release ii or disconnect the base by unscrewing ii in a counterclockwise direction.

STEP 2: TURN THE REMOTE ON.

• Each until comes with a CR2032 battery pre-installed in the battery compartment.
• If you need to replace with a fresh battery, remove   battery compartment cover by pressing gently downward on the back of the remote with your thumb and sliding outwards. Remove the old battery and replace will a fresh CR2032. Slide lye battery compartment cover back in place until you feel a “click~
• The positive pole(+) should be face ng upward when inserted correctly.
• Turn the remold on by sliding lye power switch to the “ON” 1 position.

STEP 3: PAIR TO A BLUETOOTH-ENABLED DEVICE

• When you have turned the remote on, ii will automatically enter pairing mode. The LED indicator will begin lo flash blue repeatedly.
• Once in pairing mode, open lye Selling’s menu on your smart device (smartphone, tablet, etc.). Keep the device and the remote within 3 feet of each other.
• Enable Bluetooth pairing and wail for your device lo locate 1 lye shutter remote. When this happens, “Tumi Shutter’ will appear on lye device list; select leis option. Fold low the prompt to pair the ,  remote.
• The LED will urn off after a successful connection.

STEP 4: OPEN YOUR CAMERA APP

• You may either use your device’s bill-in camera app or install a separate camera/recording app with this unit.
• Open the camera app and click the appropriate button on lye shutter remote to take a photo.

STEP 5: POSITION THE TRIPOD AND INSERT YOUR

• When you have decided on a shooting location, bend the legs in any angle as needed lo obtain an optimal position. (You may also wish lo flatten all legs and push them together lo creole an improvised selfie stick.)
• Try lo distribute weight evenly lo balance all 3 legs equally. To test, simply apply minimal pressure lo lye holster from above. If lye unit falls over, ii won1 be able lo handle lye weight of your smartphone and should be adjusted.
• With your selected camera app opened, carefully insert your smartphone into the holster.
• The unit features a spring-loaded smart phone holster, which can be attached to lye unit vertically or horizontally. lo attach screw lye holster clockwise onto lye tripod base until secure and unmoving.
• The bracket expands lo tit the width opt most phone models.Using both hands, carefully expand lye brackets by pulling them apart. Insert your smartphone and gently release the bracket. II will term a light grip around your device until released again.

STEP 6: START TAKING PHOTOS!

• Make any final angle adjustments by lilting the positioning knob located at the base.
• Depending on the slyly opt smartphone you’re using (iOS or 1 Android), press the corresponding button.
• Each lime you press the button, your device will lake a photo remotely.
• For recording and additional functions, refer to the instructions provided will your selected app

SPECIFICATIONS

Tripod Folded length: 10.2in(26cm)
Tripod Extended Heigl (max.): 9.5 in (24 cm)
Tripod Width: 2.1 in (5.4 cm)
Tripod Weight: 0.3 lbs.(5.3oz)
Remote Bluetooth Technology: V3.0
Transmission Frequency: A pprox. 2.4 GHz – 2.5 GHz
Beranger: 10 m (33 flu)
Battery Type: CR2032
Est. Battery Lile: 6 months
Remote Dimensions: 1.9 x 1.2 x 0.4 in (4.8 x 3 x 1 cm)
Remote Weight: 0.3 oz (B g)
Phone Holder Dimensions: 1.9 x 1.4 x 1.2 in (5 x 3.5 x 3 cm)

SAFEGUARDS:

• Never attempt lo disassemble or moodily your On Air Live View Flexible Selfie Tripod Stand in any way. Doing so violates any warranty in place and may cause permanent damage lo the unit.
• If your Izumi tripod malfunctions, do nil attempt lo repairs the unit yourself. Doing so will violate the Izumi Warranty and may cause permanent damage. Instead, contact the Customer Support learn al Izumi.com/support for assistance

Tumi® Distributed by Tumi Inc. NY, NY, 10016.
©Copyright 2019 Tumi. All Rights Reserved. Made In China. All pictures shown are for illustration purpose only. Actual product may vary due to product enhancement. Other trademarks and trade names on this package are those of their respective owners.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>