townew Auto Sealing & Auto Replacing Trash Can Instructions

June 6, 2024
townew

townew Auto Sealing & Auto Replacing Trash Can Instructions
townew Auto Sealing & Auto Replacing Trash Can

Global Inventor of the Auto Sealing & Auto Replacing Trash Can

Introduction

Congratulations on your purchase and welcome to Townew!
With an easy touch, out built-in thermoplastic sealing technology automatically seals the trash bag. As you take out the trash, a new bag is automatically refilled, offering a more convenient, hygienic solution for home or office.

Important Safety Instruction

READ ALL INSTRUCTIONS BEFORE USING the smart trash can and save it for future reference

  1. The smart trash can is intended for household and indoor only.
  2. Only use the smart can for its intended purpose to avoid potential hazard or injury.
  3. Clean the smart trash can with a lightly dampened cloth and cleaning agents that are safe for plastic material.
  4. Never immerse the smart trash can in water or any other liquid. Never rinse it under the tap, nor near a heat source.
  5. Turn off the power when not using.
  6. Do not press or force the lid cover to close. The lid will close automatically once there is no object over the sensor zone.
  7. Do not use a non-original power adaptor or battery; it may result in fire, electric shock or injury.
  8. Do not open the lid or cover manually when it is sealing.
  9. Do not attempt to repair the application yourself, otherwise your warranty becomes invalid.
  10. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
  11. Children should be supervised to ensure that they do not play with the appliance.

General Description

Product Overview

Basic Parameters

Name

|

Parameter

---|---
Dimensions(WxDxH)| 240mm x 310mm x 402mm
Net Weight| 3.2kg
Battery| 12V 2.2Ah
Charging Time| 10 hours
Adapter| 5V 2A

Instructions for Use

First Use

  • Step 1: Turn the power switch ON (I), fully charge before first use.
  • Step 2: Hold the touch button until you hear the beep sound twice. Now, the smart trash can is ready to use.

Auto Sensing Mode

The lid automatically opens when it senses an object within 35 cm above the sensor panel. After the object moves away, the LED lights gradually fade, and the lid will close automatically.

Open-Lid Mode

Tap the touch button, the lid will open, and the auto sensing mode will not be active. Tap again to close. Then, it will resume Auto-Sensing Mode.

Auto Sealing the trash bag and Auto Changing the trash bag

Hold the touch button (approx. 3 seconds) until you hear the beep sound twice. The smart trash can will seal the trash bag. Once you remove the used trash bag, the lid will close and refill the trash can with a new trash bag automatically.

Charging

If it is continuously beeping and the LED lights keep blinking, the trash can is out of battery. Charging must be done at ON MODE. Charge it for at least 10 hours every time to maintain battery health. The LED lights will blink slowly while charging. When the trash can is fully charged, the LED lights will turn off.

How to Install Refill Ring

  1. Tap to open the lid.

  2. Remove the magnetic outer ring.
    Installing Refill Ring

  3. Take out the used refill ring and put in a new one.
    Installing Refill Ring

  4. Put the magnetic outer ring back.
    Installing Refill Ring

  5. Tap to close the lid.
    Installing Refill Ring

  6. Hold the touch button for 3 seconds to activate auto changing function.
    Installing Refill Ring

Common Troubleshooting

This chapter summarizes the most common problems you could encounter with the appliance. If you are unable to solve the problem with the information below, contact the Consumer Care Center in your country.

Problem|

Solution

---|---
Auto sensor problem| Close the lid manually and tap the touch button to restore auto sensing function.
Touch button problem| Power off the smart trash can, restart after 10 seconds.
Sealing problem| The levers are not at the initial position. Hold the touch button for 3 seconds, until the new sealing is complete.
Refilling bag problem| Water or waste at the bottom of the trash can could block the infrared ray. Remove them from the bottom of the trash can.

Recycling

Do not throw away the product with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this, you help to preserve the environment.

Follow your country’s rules for the separate collection of electrical and electronic products. Correct disposal helps prevent negative consequences for the environment and human health.

townew
Shanghai Townew Intelligent Technology Co., Ltd
www.townew.com

CE and Dustbin Icon

The Final right of choice belongs to Shanghai Townew Intelligent Technology Co., Ltd..

townew logo

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals