Sage BCG820 The Smart Grinder Pro Instruction Manual
- June 6, 2024
- Sage
Table of Contents
Sage BCG820 The Smart Grinder™ Pro Quick Guide
BCG820/SCG820
Sage® Recommend Safety First
At Sage® we are very safety conscious. We design and manufacture appliances with your safety foremost in mind. In addition, we ask that you exercise a degree of care when using any electrical appliance and adhere to the following precautions.
IMPORTANT SAFEGUARDS
READ ALL INSTRUCTIONS BEFORE USE AND SAVE FOR FUTURE REFERENCE
- A downloadable version of this document is also available at sageappliances.com
- Before using the first time ensure your electricity supply is the same as shown on the label on the underside of the appliance.
- Remove and safely discard any packaging materials before first use.
- To eliminate a choking hazard for young children, safely discard the protective cover fitted to the power plug.
- This appliance is for household use only. Do not use the appliance for anything other than its intended use. Do not use in moving vehicles or boats. Do not use outdoors. Misuse may cause injury.
- Fully unwind the power cord before operating.
- Position the appliance on a stable, heat resistant, level, dry surface away from the edge and do not operate on or near a heat source such as a hot plate, oven or gas hob.
- Do not let the power cord hang over the edge of a bench or table, touch hot surfaces or become knotted.
- Do not leave the appliance unattended when in use.
- Always ensure the appliance is turned OFF, unplugged at the power outlet and has been allowed to cool before cleaning, attempting to move or storing.
- Always turn the appliance to the OFF position, switch off at the power outlet and unplug at the power outlet when the appliance is not in use.
- Do not use the appliance if the power cord, plug, or appliance becomes damaged in any way. If damaged and maintenance other than cleaning is required please contact Sage Customer Service or go to sageappliances.com
- Any maintenance other than cleaning should be performed by an authorised Sage® service centre.
- Children should not play with the appliance.
- Cleaning of the appliance should not be carried out by children unless they are 8 years or older and supervised.
- The appliance and its cord should be kept out of reach of children aged 8 years and younger.
- The installation of a residual current safety switch is recommended to provide additional safety when using all electrical appliances. Safety switches with a rated operating current not more than 30mA are recommended. Consult an electrician for professional advice.
- Do not use attachments other than those provided with the appliances.
- Do not attempt to operate the appliance by any method other than those described in this booklet.
- Do not move the appliance whilst in operation.
- Do not touch hot surfaces. Allow the appliance to cool down before moving or cleaning any parts.
- This appliance shall not be used by children. Keep the appliance and its cord out of reach of children.
- This appliance can be used by persons with reduced physical, sensory or mental capabilities or a lack of experience and knowledge, only if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
- Do not operate the grinder without the hopper lid in position. Keep fingers, hands, hair, clothing and utensils away from the hopper during operation.
The symbol shown indicates that this appliance should not be disposed of in normal household waste. It should be taken to a local authority waste collection centre designated for this purpose or to a dealer providing this service. For more information, please contact your local council office.
To protect against electric shock, do not immerse the power plug, cord or appliance in water or any liquid.
FOR HOUSEHOLD USE ONLY SAVE THESE INSTRUCTIONS
Getting To Know Your New Appliance
A. Bean Hopper Lid
B. Bean Hopper
C. Hardened Stainless Steel Conical Burrs
D. Backlit LCD Screen
E. GRIND AMOUNT / PROGRAM Dial
F. SHOTS / CUPS Button
G. Grind Outlet
H. Grind Tray
I. Grind Size Dial
J. START / PAUSE / CANCEL Button
K. Portafilter Activation Switch
ACCESSORIES
L. Portafilter Cradle 50–54mm
M. Portafilter Cradle 58mm
N. Conical Burr Cleaning Brush
O. Grinds Container
Oi – Container Cap
Oii – Container Lid
Operating Your New Appliance
BEFORE FIRST USE
Remove and safely discard all promotional labels and packing materials attached to your Sage® product.
Wash hopper, cradles, grind container, container lid and cleaning brush in warm soapy water and dry thoroughly. Wipe exterior of grinder with a soft damp cloth and dry thoroughly. Place grinder on flat level surface and plug power cord into 220–240V outlet and switch Power ‘ON’.
ENERGY SAVING FEATURE
The grinder will automatically switch off if not used after 5 minutes.
ASSEMBLING YOUR SAGE SMART GRINDER™ PRO
Bean Hopper
Align tabs on the base of the bean hopper and insert hopper into position. Turn the bean hopper dial 90° to lock into position. Fill with fresh coffee beans and secure lid on top of bean hopper.
COFFEE CHART
GRINDING FOR ESPRESSO COFFEE
Use single wall filter baskets when grinding fresh coffee beans. Use the finer 1–30 settings in the ESPRESSO range.
STEP 1:
Insert the appropriate portafilter cradle size. Insert your portafilter into the cradle.
NOTE
Maximum number of shots with the cradle inserted is 2.
STEP 2:
Selecting your SHOTS / CUPS Select the desired amount of ground coffee required by pressing the SHOTS / CUPS button.
Rotate the Grind Amount Dial to adjust the grinding time to achieve the correct amount of coffee.
STEP 3:
Select your grind size
For espresso, we recommend selecting Grind Size setting 12 as a starting point and moving the Grind Size dial Coarser or Finer to adjust the flow of espresso as required.
GRINDING INTO GRINDS CONTAINER OR COFFEE FILTER
STEP 1:
Remove cradle by sliding out from under the grind outlet.
Slide in grinds container with cap open or coffee filter directly under grind outlet.
- Select the required amount of ground coffee by pressing the SHOTS / CUPS button.
- Press the START / PAUSE / CANCEL button to start grinding operation.
FEATURES OF YOUR SAGE SMART GRINDER™ PRO
Automatic Grinding
Grinding automatically allows you to grind hands-free.
- Press and release either the START / PAUSE / CANCEL button or push the handle of your portafilter once. This will activate the PORTAFILTER SWITCH.
- Grinding will automatically stop when the preset amount is dispensed.
NOTE
Programming a custom grind amount/time only sets it for that particular
brew method. This will not change the other Shots or Cups settings.
Pause Function
You can pause the grinder during operation allowing you to collapse or settle the coffee in the portafilter.
- Press and release the START / PAUSE / CANCEL button to start the grinding operation.
- During grinding, press the START / PAUSE / CANCEL button again to pause the operation for 10 seconds.
- Press again within this time to resume grinding the remaining dose.
Program Function
Once you have set your required dose, you can program this time into the number of shot(s) currently displayed on the LCD. Press and hold the PROGRAM button, grinder will beep twice to confirm. Only the shot displayed will be programmed, all other shots will remain unchanged.
Manual Grinding
Grinding manually allows you to have complete control over how much coffee is dispensed.
- Press and hold either the START / PAUSE / CANCEL button or push the handle of your portafilter to activate the PORTAFILTER SWITCH for as long as you require.
- Release START / PAUSE / CANCEL button or PORTAFILTER SWITCH and grinding will stop.
ADJUSTING YOUR GRIND AMOUNT
Increasing the Grind Amount
To increase the grind amount selected, turn the GRIND AMOUNT dial to the right.
Decreasing the Grind Amount
To decrease grind amount selected, turn the Grind Amount Dial to the left.
NOTE
To RESET the grind amount/time to the default settings, press and hold the
SHOTS / CUPS button until a long beep sounds.
ADJUSTING CONICAL BURRS
Some types of coffee may require a wider grind range to achieve an ideal extraction or brew.
A feature of your Smart Grinder™ Pro is the ability to extend this range with an adjustable upper burr. We recommend making only one adjustment at a time.
Care, Cleaning & Storage
- Empty beans from the hopper and grind out any excess beans (see below).
- Unplug power cord from power outlet before cleaning.
- Wash the grind container and lid, bean hopper and lid in warm soapy water, rinse and dry thoroughly.
- Wipe and polish exterior of appliance with a soft damp cloth.
NOTE
Do not use alkaline or abrasive cleaning agents, steel wool or scouring
pads, as these can damage the surface.
NOTE
Please do not clean any grinder parts or accessories in the dishwasher.
CLEANING CONICAL BURRS
Regular cleaning helps the burrs achieve consistent grinding results which is especially important when grinding for espresso coffee.
Troubleshooting
Guarantee
2 YEAR LIMITED GUARANTEE
Sage Appliances guarantees this product for domestic use in specified territories for 2 years from the date of purchase against defects caused by faulty workmanship and materials. During this guarantee period Sage Appliances will repair, replace, or refund any defective product (at the sole discretion of Sage Appliances).
All legal warranty rights under applicable national legislation will be respected and will not be impaired by our guarantee. For full terms and conditions on the guarantee, as well as instructions on how to make a claim, please visit www.sageappliances.com.
Registered in England &Wales No. 8223512
Registered in Germany No.HRB 81309 (AG Düsseldorf)
Registered in France No. 879 449 866 RCS
- Due to continued product improvement, the products illustrated or photographed in this document may vary slightly from the actual product.
Copyright BRG Appliances 2020
BCG820/SCG820 UG6 B20
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>