SHENZHEN SAGE IOT TECHNOLOGY CO LTD R200 HDMI Wireless Extender User Manual

SHENZHEN SAGE IOT TECHNOLOGY CO LTD R200 HDMI Wireless Extender

Specifications

• Maximum video resolution : 1920X1080 @60Hz
• WiFi protocol : standard 802.11 b/g/n/ac
• Maximum distance : Up to 200m in one space
• Power output : 9V5V/2.5A
• Maximum power consumption : MAX 25W
• Dimensions (LxWxH): 109 x 70 x 45mm
• Working temperature/humidity : 0 -45 / 10% – 80%RH (Non-solidification)

Product Usage Instructions

Installation

1. Install the antenna as shown in the diagram.
2. Install batteries (compatible with NP-F750/F770 series batteries).
3. Press and hold the power button to turn on the device.

Application Diagrams

• Application 1: One-to-one application
• Application 2: One-to-many application

Physical Interface Diagram
Transmitter TX Ports Specifications:

• ON-OFF Switch
• Indicator Light
• Power port(DC12V)
• HDMI in
• HDMI out

ReceiverRX Ports Specifications:

• ON-OFF Switch
• Indicator Light
• Power port(DC12V)
• HDMI out

Interface Introduction
Detailed interface information for both TransmitterTX and ReceiverRX.

Connection Instruction

1. Install batteries (or connect to power) on the transmitter and receiver separately.
2. Press and hold the power button for 2 seconds before releasing it.
3. Turn on the screen when it is lit.
4. You can enter the menu to set according to your needs.

Product Pairing

• Connect the HDMI OUT of the receiver (RX) with the HDMI IN of the transmitter (TX) using an HDMI cable, and after pairing, the screen displays Connected. (Please install the battery and keep it fully charged when pairing)
• Note: Product has been paired in factory settings. If any pairing failure during user operating, please reset the device, and follow the instructions above to redo the pairing process.

FCC Compliance Information
Detailed information on FCC compliance and suggestions for better operation.

FAQ

• Q: How do I reset the device?
  A: You can reset the device by following the provided instructions in the user manual. Typically, it involves pressing a specific button or combination of buttons for a few seconds.

Maximum power consumption : I

HDMI Wireless Extender
HDMI Wireless Extender

User Manual
Ver. 1.0

Introduction

HDMI wireless extender uses the standard 802.11AC protocol, transmitting high- definition video and audio signals through 5G WiFi network, this could transmit the HD signal from different device s like DVD, CD player, PC through WiFi network, to realize one-to-many devices transmitting. This device also has excellent graphic computing and transmitting performance that could make the signal smoother and more stable

Features

• Long distance HDMI video and audio signal transmitting through WiFi, up to 200m
• Supporting one-to-many application, pair up to 4 receivers
• Compatible with HDMI 1.4, 1.3 standard
• Work with HDCP 1.4 standard – High-bandwidth Digital Content Protection
• Automatically compatible with multiple specs and display mode
• Built-in equalizer to make the picture smooth, clear, and stable
• Easy to install, plug and play, no need to setting

Specifications

• Maximum video resolution : 1920X1080 @60Hz
• WiFi protocol : standard 802.11 b/g/n/ac
• Maximum distance : Up to 200m in one space
• Power output : 9V，5V/2.5A
• Maximum power consumption : MAX 25W
• Dimensions (LxWxH): 109 x 70 x 45mm
• Working temperature/humidity: 0℃ -45℃ / 10% – 80%RH (Non-solidification)

installation

1. Install the antenna as shown in the diagram;
2. Install batteries (compatible with NP-F750/F770 series batteries);
3. Press and hold the power button to turn on the device.

Application diagrams

Application 1 : One-to-one application

Application 2: One-to-many application

Physical interface diagram

Transmitter (TX）

1. Ports specifications：
2. ON-OFF Switch
3. Indicator Light
4. Power port(DC12V)
5. HDMI in
6. HDMI out

2. Receiver (RX）

1. ports specifications:
2. ON-OFF Switch
3. Indicator Light
4. Power port(DC12V)
5. HDMI out

1. Transmitter (TX）
   Function:

2. Device ID

3. Frequency point display

4. Profile

5. Power supply mode

6. Number of connections

7. Receiver (RX）
   Function:

8. Device ID

9. Frequency point display

10. Profile

11. Power supply mode

12. Connection display

Connection instruction

1. Install batteries (or connect to power) on the transmitter and receiver separately.
2. Press and hold the power button for 2 seconds before releasing it.
3. Turn on the screen when it is lit.
4. You can enter the menu to set according to your needs.

Product pairing

• Connect the HDMI OUT of the receiver (RX) with the HDMI IN of the transmitter (TX) using an HDMI cable, and after pairing, the screen displays “Connected”.(Please install the  battery and keep it fully charged when pairing)
• PS: Product has been paired in factory settings. If any pairing failure during user operating, please reset the device, and following the instruction above to redo the pairing process.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>