PHILIPS 4116031P6 Hue Enrave 4300lm White Ambiance Ceiling Light User Manual
- June 11, 2024
- Philips
Table of Contents
4116031P6 Hue Enrave 4300lm White Ambiance Ceiling Light
User Manual
4116031P6 Hue Enrave 4300lm White Ambiance Ceiling Light
Warnings
Always make sure the luminaire is detached from the mains socket Always make
sure the DC cable is detached from the power supply Staring at the operating
light source may cause eye injury
| Disassemble/dismantle steps | Tools needed |
|---|
Press and rotate diffuser [12] by hand counter clockwise until it unsnap. Lift
the diffuser up to remove it from base [13]| –
Remove deco ring [11] by lifting up from the base [13]| –
Unplug wires from light source-led modules [5]| WAGO TOOL #2060
Unplug wires from light source – splitter [4]| WAGO TOOL #2060
Remove low voltage wires of Control gear – psu [2] from Light source – hue
connect [3]| FLATHEAD SCREWDRIVER OR WAGO TOOL #2065
Remove flat cable from the light source – splitter [4] and light source – hue
connect [3]| –
Unscrew 1 screw [1] and remove light source-hue connect [3]| TORXHEAD SCREW
DRIVER T10
Unscrew 14 screws [1] and remove light source -led modules [5] and plates
[16]| TORXHEAD SCREW DRIVER T10
Unscrew 2 screws [1] and remove light source – splitter [4]| TORXHEAD SCREW
DRIVER T10
Rotate bracket [14] by hand counter clockwise until it unsnap. Lift bracket up
to remove it from base [13]|
Remove terminal blocks (10] by unscrewing wires of the control gear – psu
[2],remove cover N [8] and cover L [17]| FLATHEAD SCREWDRIVER
Unscrew 3 screws [7] and remove suspension cables (15] and washers [10] from
base [13]| TORXHEAD SCREW DRIVER T10
Unscrew 1 screw [6] and remove it from bracket [14]| CROSSHEAD SCREWDRIVER PZ
Unscrew 2 screws [7] and remove control gear [2] from base [13]| TORXHEAD
SCREW DRIVER T10
| # | COMPONENT | QTY |
|---|---|---|
| 1 | Screw | 17 |
| 2 | Control gear – psu | 1 |
| 3 | Light source – hue connect | 1 |
| 4 | Light source – splitter | 1 |
| 5 | Light source -led module | 7 |
| 6 | Screw | 1 |
| 7 | Screw | 5 |
| 8 | Cover N | 1 |
| 9 | Washer | 3 |
| 10 | Terminal block | 2 |
| 11 | Deco ring | 1 |
| 12 | Diffuser | 1 |
| 13 | Base | 1 |
| 14 | Bracket | 1 |
| 15 | Suspension cable | 3 |
| 16 | Plate | 7 |
| 17 | Cover L | 1 |
| SKU | Color | Country |
| --- | --- | --- |
| 9.15006E+11 | White | EU/UK |
| 9.15006E+11 | Black | EU/UK |
| 9.15006E+11 | White | EU/UK |
| STATUS | DESCRIPTION |
Enrave L ceiling lamp white/black/white IP44 lx35W 24 V, Disassembly
instruction| DESIGN ID 01| 2021-06-10
---|---|---|---
DOC 12NC|
NAME Pa Ku| LOCAL PART ID| SH. 1| | | A3- L
| CHECKED| DATE 2021-06-10|
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>