LASER SPK-BTPLL Portable Wireless Pill Speaker User Manual

June 6, 2024
Laser

Laser Bluetooth DVD Projector - logo

LASER SPK-BTPLL Portable Wireless Pill Speaker

LASER SPK-BTPLL Portable Wireless Pill Speaker

WHAT’S IN THE BOX

  • 1 x SPK-BTPLL Speaker
  • 2 x Micro USB Cables
  • 1 x 3.5mm AUX Cable
  • 1 x User Manual

SPECIFICATION

Bluetooth version V5.0
Battery 1200mAh
Battery Runtime Approx 3 hours (at medium volume)
Speaker Driver Size 2 x Φ 52mm
Speaker Power 2 x 5W
Frequency Response 150Hz – 20KHz
Product Dimensions 80 x 80 x 180mm
Charging 5V

CONTROLS

Controls

1. Micro USB Charging Port| •    Insert one end of cable into the Micro USB Port and the other end into a USB wall adapter (not included) to start charging

•    Approx 8 – 12 hours for a full charge

---|---
2. Micro SD Card| •    Only MP3 files on FAT32 or exFAT file system are supported

•    Please try formatting to suggested file system if not detected

3. USB| •    Only MP3 files on FAT32 or exFAT file system are supported

•    Please try formatting to suggested file system if not detected

4. AUX| •    Use supplied 3.5mm AUX cable
5.| ****

•    Tap or hold to decrease volume

•    Tap to SKIP between stations in FM mode

6.| •    Tap or hold to increase volume

•    Tap to SKIP between stations in FM mode

7.| ****

•    Tap to switch between Bluetooth, FM, AUX, USB and Micro SD Card modes

8.| •    Tap to PLAY/PAUSE when using USB, Micro SD Card or Bluetooth mode

•    Tap to start AUTO SEARCH function when using FM Radio

•    Press and HOLD to turn speaker ON/OFF

FEATURES

  • True Wireless Stereo Function (TWS)
  • Bluetooth Wireless Connectivity
  • USB – Upto 32gb and FAT32 or exFAT file system only
  • Micro SD Card – Upto 32gb and FAT32 or exFAT file system only
  • FM Radio
  • AUX IN
  • Rechargeable Lithium Battery

BLUETOOTH

  • Turn on Speaker and tap “M” until “BLUETOOTH MODE” is heard
  • Search for “SPK-BTPLL” under the Bluetooth settings of device being connected

TRUE WIRELESS STEREO – TWS

(2 speakers required)

  • Turn ON both speakers and switch them into Bluetooth mode
  • Press and hold M button on one of the speakers
  • A sound will be heard which indicates the unit is waiting for TWS pairing
  • Keep the button held for 5 – 10 seconds and another sound will be heard when TWS is connected successfully

FM RADIO

  • Tap to start the AUTO SEARCH function for FM stations
  • This operation will scan all FM stations and record them to memory
  • The scan procedure will take 1 – 2 minutes to complete and should not be interrupted
  • Once complete you can tap or to skip between the saved stations

Connect a Micro USB cable into the charging port to improve FM reception

TROUBLESHOOTING

No Power:

  1. Check battery level and charge if required
  2. Try turning on speaker while connected to power source
  3. Try charging with USB Wall Adapter

Radio not clear:

  1. Change speaker location
  2. Connect a Micro USB cable into the charging port to improve FM reception as this doubles as an aerial
  3. Isolate speaker from other devices as this may be caused by interference

USB or Micro SD Card not recognized or files not playing:

  1. Make sure USB or Micro SD Card is 32Gb or less
  2. Check USB or Micro SD Card has been formatted to the FAT32 or exFAT file system. If not please format on a Windows based computer
  3. Make sure to only use MP3 music files copied to the USB or Micro SD Card

LASER
www.youtube.com/LasercoAu

WARRANTY

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

www.laserco.com.au

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals