Piper Home TG8818N Contactless Digital Infrared Thermometer Instruction Manual

Piper Home TG8818N Contactless Digital Infrared Thermometer Instruction Manual

1. INTRODUCTION: PROOUCT & CLASSIFICATION

This product measures body temperature by collecting the infrared thermal radiation from ,a human’s forehead. Simple and convenient to operate, the thermometer produces quick and accurate results.

Scope of Use: Measuring the forehead thermal radiation of a human subject in order to determine the subject’s. body temperature.

2. FUNDAMENTAL WORKING PRINCIPLES

Objects emit infrared thermal radiation energy. Their radiation energy wavelength and level are directly determined by their surface temperature. Based on this principle, the design of this product adopts a highs predesign
infrared sensor, used for detecting the infrared radiation energy emitted by the human body with the wavelength of S- 14um.Through accurate calculation, compensations and correcting agents, this product accurately measures human body temperature

3. PRODUCT FEATURES

• Stable and reliable high precision infrared sensor
• Environmental temperature adaptability, enabling: the product to be used across a variety of environments
• Automatically saves the last temperature measured
• Two-unit options of measurement : Celsius and Fahrenheit
• Shuts down automatically to save battery energy

4. TECHNICAL PARAMETERS

5. COMPONENTS

1. Infrared detector
2. LCD Screen
3. Down key
4. Up key
5. Set key
6. Measuring key
7. Battery cover

6. FUNCTION SETTINGS

The product pro11ld-es three function settings which include: Piper & Home

1. Switching the un it of temperature
2. Turning the audio on/off
3. Switching the measurement modes

Comparison table of function settings:

Temperature Unit settings (Ft):
When the thermometer is turned on, press the “SET” key.
Hold until the LCD displays. Fl “. And then press the “+” key or “-” key to switch to .. ° F” or “°C”.

Audio settings (F2):
When the machine is turned on, press the “SET” key until the LCD displays “F2”. And then press the “+”key or “-“key to turn the sound on/off.

Measurement Mode settings (F3)
When the machine is turned on, press the “SET” key, until the LCD displays °F3″. And then press the “+” key or “-“key to switch between Body and Surface modes.

Tips:

1. Keep the inner cavity of the sensor and probe clean before and after use.
2. Store the thermometer in a stable temperature environment. When the ambient temperature changes drastically, let the thermometer sit for about ten minutes prior to use.
3. Do not measure the body temperature immediately after measuring the temperature of an extremely high or low temperature object.
4. If the measurement object comes from an environment with a great difference from the current test environment temperature, let the thermometer sit in the test environment for at least five minutes.
5. Avoid taking measurements. when the forehead is exposed to wind, water, sweat, or has applied cosmetics. Do not take measurements within 30 minutes of exercising, showering, or eating.
6. Do not disassemble or modify the machine, otherwise it will cause inaccurate measurement results.

Limited Lifetime Warranty

suppcrt@piperandhome.com

7. MAINTENANCE AND PRECAUTIONS

1. Read this manual carefully before use to make sure the battery is properly installed.
2. The thermometer will only work in environmental temperatures above 15°C/59°F. It will not operate in colder ambient temperatures.
3. Keep the inner cavity of the sensor and probe clean. otherwise the accuracy of measurement will be negatively affected. Use a clean soft cloth, cotton swab or medical alcohol wipes lo clean the areas exposed to dirt. Allow to dry before use.
4. Do not immerse the thermometer in liquid. Do not leave it in high or low temperature environments for a long period of time.
5. Do not collide, drop or put sharp objects in the thermometer. Do not disassemble yourself.
6. It is recommended to practice using the thermometer several times to get familiar with the measurement methods. Try not to change the factory settings.
7. Measurements are not a substitute for a physician’s diagnosis.
8. Please contain the seller or manufacturer if there is any trouble during use.
9. Please dispose of the waste and residue at the end of the service life of the product accordingly with local laws and regulations.

8. TROUBLESHOOTING

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>