Cabasse THE PEARL Active High-Resolution Connected Speaker User Guide
- June 6, 2024
- Cabasse
Table of Contents
THE PEARL Active High-Resolution Connected Speaker
THE PEARL THE PEARL AKOYA
User guide
You have just bought THE PEARL or THE PEARL AKOYA and we thank you for your trust. We recommend reading this leaflet carefully to take full advantage of all the possibilities of THE PEARL and THE PEARL AKOYA.
SAFETY INSTRUCTIONS
Explanation of symbols
Lightning within an equilateral triangle warns of the existence of dangerous,
uninsulated high voltage inside the product enclosure, of sufficient value to
present a risk of electric shock.
The exclamation point in an equilateral triangle warned of the existence of
instructions usage and maintenance in the documentation attached to this
product.
Cleaning – Unplug the unit before cleaning.
Do not use cleaning solutions in liquid or aerosol form. Use preferably a damp
cloth.
Installation on furniture and stands – Do not place this unit on an unstable
stand,
such as stands, tripods, tables, shelves, etc. It could fall and cause serious
injury to a child or adult who is nearby.
Ventilation – The appliance must be
positioned so that it does not interfere with its own ventilation. For
example, it should not be installed on a bed, sofa, blanket or similar
surfaces that could block its vents. It should not be embedded in confined
spaces such as narrow shelves or furniture that could limit the amount of air
available to the air intakes.
Power supply – The appliance must only
be connected to a power source of the type written in the user manual or in
line with the product. If you are unsure of the type of power supplied to your
location, contact your dealer or the local power company.
Electrical Overloads -Do not
overload power outlets, extension cords, or power reminders. This could result
in fire or electrocution.
Foreign bodies and liquids – Care
should be taken never to let foreign objects or liquids enter the unit. They
could cause fires or electrocutions. Never pour liquid of any kind into the
device.
Maintenance – – In the following cases,
you must unplug your appliance and have it checked by a qualified technician:
the power supply or plug has been damaged.
foreign bodies or liquid have entered the device.
the unit has been exposed to rain or has been sprayed with water.
the unit does not seem to be working properly while you are using it as part
of its normal operating instructions.
Only handle the controls covered by the user manual. Any other procedure could
damage it and require the intervention of a qualified technician.
the unit has fallen or its bodywork is damaged.
the device shows significantly changed performance.
In a disturbed area environment (thunderstorm etc …), the product may
sometimes require shutdown and restart by means of the ON / OFF power switch
located on the rear panel of the device to work properly again.
Spare parts – If the repair required the use
of spare parts, make sure that the technician has used the references
recommended by the manufacturer or having the same characteristics as the
original parts. Nonconforming parts may cause fire, electric
2
shock or other.
Checks – After any work on the unit, have
the technician perform tests to ensure that the unit operates safely.
Plastic Bags -Do not leave plastic bags
in the box within reach of children to avoid choking.
IMPORTANT SAFETY INSTRUCTIONS!
1. READ these instructions.
2. SAVE these instructions.
3. RESPECT all warnings.
4. FOLLOW all instructions.
5. DO NOT use this unit near water.
6. CLEAN ONLY with a dry cloth.
7. DO NOT obstruct the ventilation holes.
Install according to the manufacturer’s instructions.
8. DO NOT install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9. DO NOT disable the safety feature of the polarized or ground pin plug. A
polarized plug has one blade wider than the other. A ground pin plug has two
blades and a third pin for the ground. The wide blade or the third pin is
provided for the safety of the user. If the provided plug does not fit into
the outlet, have an electrician replace this outlet type that is too old.
10. PROTECT the power cord, making sure that it is not likely to be
stomped or crushed, particularly near the
plugs, power strips and its point of exit from the device.
11. USE ONLY the accessories recommended by the manufacturer.
12. Unplug this apparatus during lightning storms or when unused for
a long time.
13. CONFIRM any troubleshooting work to a competent professional repairer.
Have the device repaired in case of damage, for example: damaged plug or power
cord, liquid spilled on the device or object inserted in the device, unit
exposed to rain or moisture, malfunction or after a fall.
14. RUNOFF / HUMIDITY: To prevent fire or shock hazard, do not expose the
unit to water or moisture. The appliance must not be exposed to any risk of
liquid leaks, no object such as a vase will be placed on or above the
appliance.
15. KEEP this product a safe distance away from any naked flame, such as a
lit candle.
16. THE MAINS are nor disconnected in the off position, but the circuits are
de-powered.
CAUTION: do not ingest the battery, fatal risk of chemical burn within 2 hours. Always keep button cells, new and used, out of reach of children. Seek immediate medical attention if you think that batteries may have been swallowed or inserted anywhere in the body. If the battery compartment no longer closes securely, stop using the product and keep it away from children.
3
UNPACKING
Open the cardboard box widely and take out the different elements one by one.
If any of the items on the carton appear to be damaged, do not use it, put it
back in the original carton and contact your dealer immediately. Keep your
packaging for possible future transport of your system.
INSTALLATION THE COMPONENTS OF YOUR SYSTEM 1 THE PEARL, 1 power cord, 1 remote
control, 1 simplified instruction and 1 warranty
card.
THE PEARL AKOYA, 1 power cord, 1 remote control, 1 simplified instruction and
1 war-
ranty card, , 1 USB adaptor, 1 RCA-Jack 3.5 mm adapter , 1 sac carry bag.
4
REMOTE CONTROL KEYS THE PEARL
Volume + Preset 1 access Previous Play / Pause Next Source Selection Volume –
FUNCTIONS
Bluetooth connection
Loss less audio broadcast
Access to all audio media from the WIFI network (computer …)
Multi-room
Broadcast smartphone / tablet audio content
YES
Broadcast audio application (youtube …) from smartphone / tablet
YES
Broadcasting from USB media
WLAN/LAN via internet routeur / box
YES YES YES YES
YES
Internet radio and music services
Qobuz, Deezer, Napster, Spotify,
Tidal, Vtuner
5
THE PEARL
Status LED Reset
Optical LAN USB
POWER
ON/OFF
Pairing LED Pairing
Analog RCA IN
THE PEARL AKOYA
Status LED Reset
Optical LAN
POWER
ON/OFF
Pairing LED Pairing
Analog USB
6
REMOTE CONTROL ACTIVATION Before first use, unscrew the screw (PH00
screwdriver), remove the cover, remove the protective tab, replace the cover
and retighten the screw. The blue LED on the remote control flashes, waiting
for pairing. PAIRING THE REMOTE CONTROL 1- Connect the speaker to the mains.
2- Switch on the speaker using the on / off button on the back. 3- Press the
“pairing” button on the back of THE PEARL/ THE PEARL AKOYA briefly. The LED
“pairing” flashes. 4- The LEDs on the remote control and THE PEARL stop
flashing when the pairing is finalized. Replacement of the CR-2450 type
button-cell: turn the remote control over, unscrewthe screw, remove the cover,
remove the old battery, insert the new battery, marked “+” to the outside,
replace the cover, tighten the screw.
FIRST USE Connect THE PEARL to the mains with the proper power cord. THE PEARL
/ THE PEARL AKOYA is operational as soon as the LED on the left of the rear
panel opposite is lit in solid blue. A voice announcement, if the volume of
THE PEARL / THE PEARL AKOYA is not at a minimum, indicates the status of the
network connection: current, successful, failure. STEREO USE WITH 2 THE PEARL
/ THE PEARL AKOYA Use only one remote control to drive a stereo pair. Do not
activate another remote in the same room.
COLOR CODES OF THE STATUS LED
CYAN DLNA input: wifi, Ethernet, domestic streaming , internet streaming GREEN
Spotify Connect WHITE Aux In Input YELLOW Optical input BLUE Bluetooth input
RED (flashing) Connexion to network failed PURPLE Automatic calibration
running
7
WIRED AND NON-WIRED INPUTS THE PEARL
ANALOG INPUT
This input can be connected to an audio source (CD player, MP3 player,
smartphone, TV) equipped with an analog output RCA or mini-jack type. Use RCA
/ RCA cord or minijack / RCA cord (not included)
USB INPUT
This input is only useful for use in Wi-Fi / Ethernet mode (paragraphs 4,5,6
below). Connect a USB stick or hard drive containing audio files to this input
to automatically network them. All files in formats recognized by the DLNA
server included in THE PEARL are then listed in the Stream Audio Control
application and can be read by all Cabasse Stream players connected to the
same network. The PEARL USB socket has a 5V – 1A DC power supply for use with
a portable hard drive without external power supply.
WIRED AND NON-WIRED INPUTS THE PEARL AKOYA
ANALOG INPUT
This input can be connected to an audio source (CD player, MP3 player,
smartphone, TV) equipped with an analog output RCA or mini-jack type. Use the
included RCA / mini-jack adapter for RCA-RCA cord or minijack / RCA cord (not
included), or a mini-jack/mini-jack cord if the source output is mini-jack
type.
Micro-USB INPUT
This input is only useful for use in Wi-Fi / Ethernet mode (paragraphs 4,5,6
below). Connect a USB stick or hard drive containing audio files to this input
to automatically network them. Use the supplied Micro-USB/USB adpater if
needed. All files in formats recognized by the DLNA server included in THE
PEARL are then listed in the Stream Audio Control application and can be read
by all Cabasse Stream players connected to the same network. The PEARL micro-
USB socket has a 5V – 1A DC power supply for use with a portable hard drive
without external power supply.
8
BLUETOOTH CONNECTION
1. Once the speaker is on, press the “Pairing” button on the back 2. The
“Pairing” LED on the back should flash 3. Activate Bluetooth on your mobile 4.
Select “THE PEARL XXXX Cabasse” from the list of available devices 5. Once the
connection is successful, the LED “Pairing” on the back stops flashing
WIRE CONNECTION (LAN) TO THE ETHERNET NETWORK
The wired Ethernet connection guarantees an optimum and constant transfer rate
in any environment. Use this if Wi-Fi mode operation shows untimely cuts or
stops of music, signs of a saturated Wi-Fi network, or too much router-to-
stream distance. Connect an RJ45 cable between THE PEARL / THE PEARL AKOYA and
your router (or Box Internet). The connection is established when the ETH
diode changes to solid blue. The WIFI connection is then automatically
disabled. CAUTION: DHCP mode of the router must be enabled.
9
WARNING ! An update of THE PEARL software can start automatically as soon as
an internet connection is made.
The beginning and the end of the update are announced by voice.
Do not turn off or disconnect THE PEARL
or THE PEARL AKOYA during updates that may require several minutes.
10
WIRELESS DLNA CONNECTION (WLAN) TO WIFI NETWORK
1 on a smartphone or tablet connected to the Wi-Fi network. 1. Install the
Cabasse Stream CONTROL App on your tablet / smartphone from “Play Store” for
an Android device, or “App Store” for an Apple product. 2. Press the PEARL
“pairing” button for 3 seconds: the blinking pairing LED shows that the THE
PEARL is ready for pairing 3. Open the “settings” or “parameters” App of your
smart
2 phone or tablet, select “Wi-Fi ” then “THE PEARL XXX” among the list of
available networks. You might have to wait a little for THE PEARL to be
listed. 4. Open the application and choose “configure this new player” 5.
Follow the instructions and upon request select the wi-fi network to be used
and enter the network password. 6. Start listening to your favorite music from
your smartphone, key or hard drive connected to THE PEARL’s USB input, or
using sources connected to its analog input or optical input. The sources
connected to the analog and optical inputs of THE PEARL can be played by all
the other Stream devices belonging to the same zone.
11
STREAM CONTROL APPLICATION
FIRST USE Open the Stream Control application and launch the tutorial to
discover the main features of the application.
Swipe left-right to open the window giving access to sources and settings.
Select “parameters” then “see the tutorial” at the bottom of the “settings” page. Here are the
main actions detailed here:
– Navigation in the application
– Stereo mode
– Selection / configuration of a zone
– Voice control
– Zone Management
– Audio Customization
– Player options
– Favorites
– Media Playback Menu
– Services
12
USE / SYNCHRONIZE WITH A TV SET
CONFIGURATION 1- Lay THE PEARL / THE PEARL AKOYA next to your TV, or a pair of
THE PEARL or THE PEARL AKOYA on both sides of the TV on a solid stand. 2-
Leave a space of at least 3 centimeters between the rear wall and the
appliance. 3- Connect THE PEARL / THE PEARL AKOYA to the TV with one of the 2
available inputs. Favor the SPDIF coaxial solution: – SPDIF optical input:
Connect the “OPTICAL IN” input to the TV audio output (TV Audio OUT) with the
supplied optical cable or equivalent. Make sure that the protective caps at
the ends of the optical cable are removed.
– THE PEARL analog RCA input: if the TV does not have an SPDIF optical output,
connect the “AUX IN” input to the TV’s analogue stereo output (RCA TV Audio
out) with an RCA-RCA cable , or to the headphone output of the TV with a Jack-
RCA cord (not supplied).
– THE PEARL AKOYA analog 3.5mm jack input: if the TV does not have an SPDIF
optical output, connect the “AUX IN” input to the TV’s analogue stereo output
(RCA TV Audio out) with an RCA-RCA cable and the supplied RCA to mini-jack
adapter, or to the headphone output of the TV with a Jack-miniJack cord (not
supplied).
DEACTIVATION OF THE SPEAKERS OF THE TELEVISION Turn on the TV, open the TV
menu, and look for a tab such as Audio, Sound or Speakers. Use the menu
function to switch off the TV speakers. This menu item may for example be
labeled “Speaker On / Off” for speakers on / off. If this function does not
exist, bring the TV sound volume with the TV remote control to the minimum
level.
ACTIVATION OF THE OPTICAL OUTPUT OF THE TELEVISION If there is no sound with
an optical connection, set the chosen optical output in the TV menu if
necessary.
OPTIMIZATION OF AV SYNCHRONIZATION In order to provide a stable stereo
reproduction with a WLAN connection, the standard delay in the firmware of THE
PEARL / THE PEAL AKOYA can be up to 1000 milliseconds. This delay can be
divided by 5 or more for AV purpose by selecting the TV mode instead of the
Hi-Fi mode.
13
AUDIO CUSTOMIZATION
AUTOMATIC CALIBRATION
1: place The Pearl speaker on a stable and not resonant stand or support, with
a correct height and orientation according to your favorite listening
positions.
2 : enter into settings / players / The Pearl / automatic calibration
3 : follow the instructions and press “start”
4: stay away from the speaker during calibration. Avoid making noise
14
4: press OK to exit or follow further instructions
AUDIO OPTIMIZATION
PREFERED AUDIO SPECTRUM
1 : enter into settings / players / The Pearl / Audio Spectrum
2: select the expected response curve, press “Back” and save the setting. Listen to The Pearl with your favorite cuts. Test an other option if the setting does not meet your expectations.
15
CREATE A STEREO PAIR
1 : CREATE A ZONE WITH 2 THE PEARL
1 : press on the name of the first The Pearl to access to Zone
2 : press on the “…” icone to select the first The Pearl
3 : select the second The Pearl and create a group (zone) of 2 speakers. Note
that other Cabasse Stream products can be added to the zone, for instance for
a synchronised diffusion in another room
16
2 : TURN THE DUAL MONO ZONE INTO A STEREO ZONE
1 : select the left speaker icone for the The Pearl on the left
2: select the right speaker icone for the The Pearl on the right . Exit Zone. The stereo pair is listed with a name composed by both speakers’names.
3: Stereo balance: press on the “settings” icone on the right of the volume
control bar and access the volume setting of each speaker to adjust the
left/right balance if necessary.
17
STREAMING QUALITY OPTIONS (QOBUZ)
Qobuz (today, and soon other providers) offers several resolution qualities
for most of its streaming catalogue. If your internet access does not allow to
play high resolution files, please select another position in the audio
quality menu
DISPLAY THE AUDIO SPECIFICATIONS OF THE CUT BEING PLAYED
The audio specifications are available on most sources. When playing a music
cut open the here-under page by clicking on the icone on the left of the
volume control bar.
Open “Audio Quality” in settings / Players/ The Then click on the “i” info icone to display the
Pearl.
specifications
Set the maximum audio quality allowed: Normal = up to MP3 320 kbs Superior =
up to FLAC 16 Bits / 44 kHz Best = up to FLAC 24 Bits / 192 kHz
Click on “OK” to erase the specifications window.
18
19
DEEE MARKING Treatment of electrical and electronic devices at the end of
their life (applicable in the countries of the European Union).
This crossed-out wheeled bin symbol affixed to the product indicates that this
product should not be treated with household waste. It must be handed over to
a collection point for the treatment of electrical and electronic equipment at
the end of its life. By ensuring that this product is disposed of properly,
you will help prevent potential negative consequences for the environment and
human health. Recycling materials will help conserve natural resources. For
more information about recycling this product, you may contact your
municipality, your dump or the store where you purchased the product.
REPLACING THE BATTERY FROM THE REMOTE CONTROL
Turn the remote control over, facing towards the floor. Remove the old battery
and replace it with another type CR-2450 coin cell. Dispose of the used
battery according to the information below.
Information about batteries and accumulators in the equipment (Applicable in
the countries of the European Union).
This crossed-out wheeled bin symbol affixed to a battery or accumulator
indicates that the battery or accumulator should not be disposed of as
unsorted household waste but should be collected separately from the battery.
to make it easier to process and recycle. It must be returned to a collection
point for the treatment of used batteries and accumulators. By ensuring that
this product is disposed of properly, you will help prevent potential negative
consequences for the environment and human health. Recycling materials will
help conserve natural resources. For more information about recycling this
product, you may contact your municipality, your dump or the store where you
purchased the product.
WARNING for explosion hazard if battery is incorrectly replaced: use only the same or equivalent battery. Do not expose batteries to excessive heat such as the sun, fire or the like.
20
AUTOMATIC UPDATE
THE PEARL software updates are automatic.
The update time is variable and can last up to fifteen minutes during the
first connection to the Internet.
The beginning and the end of the update are announced by voice.
THE PEARL is not functional during this phase.
FAQ
Check out our answers to frequently asked questions on www.cabasse.com, on the
STREAM FAQ page.
AFTER SALES SERVICE
Cabasse has a network of authorized resellers who are at your disposal to
ensure the aftersales service of your equipment.
For a list of Cabasse Authorized Dealers, contact us or visit our website
www.cabasse.com.
WARNING ! Do not turn off or disconnect THE PEARL from the mains during the update phases! An update may take several minutes.
Note: the reference of the current software version is available via the Cabasse Stream application: tab “Settings” + sub-tab “audio players” + THE PEARL
CLEANING
THE PEARL can be cleaned with a soft cloth, do not use detergent or liquid
that can run inside the appliance.
Do not use any solvents, chemicals, or cleaning solutions containing alcohol,
ammonia, or abrasives.
21
THE PEARL
Digital inputs
Analog input Power supply Consumption Consumption in Eco mode Remote control
Operating temperature Storage temperature Moisture rate in use
Network
Audio formats Wifi/RJ45 Voice control Music services
– 1 DLNA input: wired with RJ45 plug or Wi-Fi dual band 2×2 802.11a / b / g /
n / ac
– 1 Bluetooth 4.2 input – 1 S / PDIF optical input – 1 USB 2.0 input 5V 1A
RCA stereo 100-240 V ~60/50 Hz, 6A
1,400 W
2.9 W @ 100-240VAC~50/60Hz
Bluetooth low energy
+5°C à +35°C -5°C à +40°C 40% to 70% 10/100Mb Ethernet MAC & PHY Wireless LAN
802.11b/g/n WPS 2.0 Security Digital audio player (DMR with DLNA 1.5) MP3,
AAC, WMA, WAV, AIFF, FLAC, ALAC up to 24 bits/ 192 kHz
Google – Alexia ready Qobuz, Deezer, Napster, Spotify Tidal, Vtuner
22
Speakers
Active 3-way amplification
Distortion rate plus noise
(THD + N on the tape 20-20 000 Hz for a power of 100 mW and more)
Dimensions (h x l x p) Weight
1 coaxial medium-high BCI 1 x woofer 25 HELD tweeter: 300 W medium 300 W
woofer 1 000 W Wifi : < 0.2% Bluetooth : < 0.2% Analogic : < 0.2% Optical<
0.2%
326 x 327 x 323 mm
18 kg
FUNCTIONS
Loss less audio broadcast
Access to all audio media from the WIFI network (computer …)
Multi-room
Broadcast smartphone / tablet audio content
Broadcast audio application (youtube …) from smartphone / tablet
Broadcasting from USB media
Bluetooth connection
YES YES
WIFI/ETHERNET via routeur
internet / box internet YES YES YES YES
YES
Internet radio and music services
Qobuz, Deezer, Napster, Spotify,
Tidal, Vtuner
23
CABASSE – NOT TP EN 19-05-26
Cabasse SAS – 210, rue René Descartes – BP 10 – 29280 Plouzané – FRANCE Tel
+33 298 05 88 88 – Fax +33 298 05 88 99
www.cabasse.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>