FANATEC CSL Elite Wheel Base+ User Manual
- June 6, 2024
- FANATEC
Table of Contents
CSL Elite Wheel Base+
QuickGuide
PlayStation ”, “ PS4” and are registered trademarks of Sony Interactive
Entertainment Inc. All rights reserved.
All other trademarks are the property of their respective owners.
CONTENTS
| 
---|---
- CSL Elite Wheel Base + (PS4™ version) (A)
- Table clamp (B)
- Table clamp screw with handle (C)
- Power supply unit (D)
- Power cord (regional) (E)
- USB connection cable (F)
- O-Ring (G)
- PS4™ button caps for ClubSport steering wheels (H) (ClubSport steering wheels sold separately)
- Black washers (I) (for mounting ClubSport Static Shifter Paddles)
TABLE CLAMP
-
Insert the table clamp screw with handles (C) into the table clamp (B).
-
Turn the table clamp screw (C) into the bottom center of the CSL Elite Wheel Base + (A).
-
Slide the CSL Elite Wheel Base + (A) onto the tabletop until the limiter blocks stop sliding at the edge of the table.
NOTE: Table clamp (B) has to be below the tabletop.
-
Tighten the table clamp (B) by turning the table clamp screw (C). Ensure that the table clamp’s feet remain well aligned with the bottom of the table plate.
HARD-MOUNTING
To hard-mount, the wheelbase first disassembles the two blocks from the
underside (lower left picture) using a 3 mm Allen key (not included). The CSL
Elite Wheel Base + offers a three-point hard-mount location on the underside
(lower right picture):
IMPORTANT: Use only good quality M6 bolts. Choose the correct bolt length
to prevent the thread from reaching more than 16 mm into the wheelbase.
Example:
If your table is 20 mm thick, the bolts must not exceed a total thread length
of 36 mm! Always use all three hard-mount points as this allows for a proper
and stable installation and avoids damage!
NOTE: To hard-mount the CSL Elite Wheel Base + to a table or rig with bolts please, find the printable drilling template in the download area of our website: www.fanatec.com
MODES
The CSL Elite Wheel Base + (A) will start in “PlayStation®4 Mode” by default.
To switch to other modes press the “Mode” button once. The LED above the “
button will indicate the current operation mode:
- Blue indicates “PlayStation®4 mode”
- Red indicates “PC mode”
- Purple indicates “ClubSport Wheel Base V2 Compatibility Mode”
ON AND OFF
To turn on the CSL Elite Wheel Base + (A), connect it to power and press the “
button on the right side of the CSL Elite Wheel Base + (A) for about one
second.
To turn off the CSL Elite Wheel Base + (A), press and hold the “ button for 5
seconds.
NOTE:
Only use the power supply (D) and power cord (E) included with this product.
ATTENTION
When starting up the CSL Elite Wheel Base + (A) for the first time please
update the firmware, which can be obtained from
www.fanatec.com/downloads. Follow the
instructions provided in the user manual.
Compatibility with PlayStation®4 games on a case-by-case basis. For a full
list of compatible games, please visit
www.fanatec.com.
CONNECTIONS
IMPORTANT!
Use only the USB cable (F) with a straight plug packaged with the CSL Elite
Wheel Base for PlayStation®4 to avoid damage to the USB port.
MANUAL
For detailed information please download the user manual from
www.fanatec.com/support. This is just a
QuickGuide and you will miss a lot of features if you don’t read the user
manual.
This product is under the warranty of Endor AG, E.ON-Allee 3, 84036 Landshut,
Germany,
Telephone: +49 (871) 9221-122, Fax: +49 (871) 9221-221,
Email: info.webshop@fanatec.com.
Refer to the chapter ‘warranty’ of the user manual as well as the terms &
conditions of Endor AG on www.fanatec.com/terms-and-
conditions.html.
ECOLOGY ADVICE
In the European Union: At the end of its working life, this product should not be disposed of with standard household waste, but rather dropped off at a collection point for the disposal of Waste Electrical and Electronic Equipment (WEEE) for recycling.
Depending on their characteristics, the materials may be recycled. Through
recycling and other forms of processing
Waste Electrical and Electronic Equipment, you can make a significant
contribution towards helping to protect the environment.
Please contact your local authorities for information on the collection point
nearest you.
For all other countries: Please adhere to local recycling laws for electrical and electronic equipment.
Retain this information. Colors and decorations may vary.
In the European Union: The packaging materials can be depolluted for recycling
according to the legal regulations depending on the country responsible for
the corresponding law.
For all other countries: Please adhere to local recycling laws for packaging
materials.
Manufactured by
Fanatec® is a registered trademark of Endor AG Designed and developed by Endor
AG in Germany
E.ON-Allee 3 – 84036 Landshut – Germany
Telephone: +49 (871) 9221-122 Fax: +49 (871) 9221-221
Email: info.webshop@fanatec.com
Website: www.fanatec.com –
www.endor.ag
Licensed for sale in Europe and Australia and for use exclusively with
PlayStation®4.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>