FANATEC CSL Elite Racing Wheel User Guide
- June 6, 2024
- FANATEC
Table of Contents
CSL Elite Racing Wheel
CONTENTS
A
B
C
D
E
F
G K
H
I
J
L M
· CSL Elite Wheel Base (PS4TM version) (A) · Table clamp (B) · Table clamp
screw with handle (C) · Power supply unit (D) · Power cord (regional) (E) ·
USB connection cable (F) · O-Ring (G) · CSL Elite Steering Wheel (H) · Allen
key 5 mm (I) · Fixation screw M6 x 18 mm (flat head) (J) · Racing style button
caps for CSL Elite Steering Wheel (K) · PS4TM button caps for (optional)
ClubSport steering wheels (L) · Black washers (M) (for mounting ClubSport
Static Shifter Paddles)
7
MANUAL
For detailed information please download the user manual from
www.fanatec.com/support. This is just a QuickGuide and you will miss a lot of
features if you don’t read the user manual. This product is under warranty of
Endor AG, E.ON-Allee 3, 84036 Landshut, Germany, US/CAN Support Telephone: +1
424-343-8129, Email:
info.webshop@fanatec.com. Refer to the chapter `warranty’ of the user manual
as well as the terms & conditions of Endor AG on https://www.fanatec.com/us-en
/terms-and-conditions-us.html. Please send Fanatec product returns to this
address: Fanatec Service Center c/o Ronay McClay 14221 Artesia Blvd La Mirada,
CA 90638 USA
ATTENTION
The CSL Elite Racing Wheel comes fully functional outof-box but we recommend
to update the firmware. This requires a PC for the update procedure and an
internet connection to download the latest driver and firmware from
www.fanatec.com/downloads. Follow the user manual instructions. Compatibility
to PlayStation®4 games is a case-by-case basis. Compatible titles are listed
on https://www.fanatec.com/us-en/support/faq/details&id=103.
ON AND OFF
To turn on the CSL Elite Racing Wheel, connect it to power and press the ” ”
button for about one second, on the right side of the CSL Elite Racing Wheel.
To turn off the CSL Elite Racing Wheel, press and hold the ”
” button for 5 seconds.
H-PATTERN SHIFTERS
In H-pattern mode or SQ mode
PEDALS
NOTE: Only use the power supply (D) and power cord (E) included with this product.
8
9
CONNECTIONS
STATIC SHIFTER / SEQUENTIAL SHIFTER
Only in SQ mode
HANDBRAKE
USB to PlayStation®4*
IMPORTANT!
Use only the USB cable (F) with straight plug packaged with the CSL Elite
Racing Wheel to avoid damage to the USB port.
QuickGuide
US
- also to PC PC compatibility not tested nor endorsed by Sony Interactive Entertainment LLC.
“PlayStation” and the “PS” Family logo are registered trademarks of Sony Interactive Entertainment Inc.
10
11
www.fanatec.com
ATTACHING THE RIM
1 Use fixation screw (J) and Allen key (I) from box contents.
2
Align CSL Elite Wheel Base (A) axle to correct position.
3 Slide CSL Elite Steering Wheel (H) onto CSL Elite Wheel Base (A) axle.
4 Turn the CSL Elite Steering Wheel (H) top side down to see the bottom side
of the clamp ring to follow next step below.
5 Push CSL Elite Steering Wheel (H) until the screw hole matches with hole on
CSL Elite Wheel Base (A) axle.
6 Turn in fixation screw (J) to fix clamp ring mechanism. Use only the
included Allen key (I).
IMPORTANT: Tighten only by using the short lever of Allen key!
1
DETACHING THE RIM
1 Turn out the fixing screw (J) and open clamp ring mechanism. Use only the
Allen Key (I) which comes with the CSL Elite Racing Wheel!
2 Slide CSL Steering Wheel (H) off CSL Elite Wheel Base (A) axle.
3 Store fixation screw (J) and Allen key (I) safely for later use.
EXCHANGEABLE BUTTON CAPS
To detach the button caps, simply pull them out by hand. They can be replaced
with the included set of racing style button caps for CSL Elite Steering Wheel
(K).
2
1 Insert the table clamp screw with handles (C) into the table clamp (B).
2 Turn the table clamp screw (C) into the bottom centre of the CSL Elite Wheel
Base (A).
TABLE CLAMP
3
Slide the CSL Elite Wheel Base (A) onto the table top until the limiter blocks
stop sliding at the edge of the table. NOTE: Table clamp (B) has to be below
table top.
4
Tighten the table clamp (B) by turning the table clamp screw (C). Ensure that
the table clamp’s feet remain well aligned with the bottom of the table plate.
HARD-MOUNTING
To hard-mount the wheel base, first disassemble the two blocks from the
underside (lower left picture) using a 3 mm Allen key (not included). The CSL
Elite Wheel Base + offers a three-point hard-mount location on the underside
(lower right picture):
IMPORTANT: Use only good quality M6 bolts. Choose the correct bolt length to
prevent the thread from reaching more than 16 mm into the wheel base. Example:
If your table is 20 mm thick, the bolts must not exceed a total thread length
of 36 mm! Always use all three hard-mount points as this allows for a proper
and stable installation and avoids damage!
3
Table
max 16mm X
NOTE: To hard-mount the CSL Elite Wheel Base + to a table or rig with bolts please, find the printable drilling template in the download area of our website: www.fanatec.com
4
CENTER CALIBRATION
If a center calibration is needed (e. g. after firmware update of wheel base)
you need to enter the tuning menu by pressing button as shown on the graphic
“S…” will appear on the display. Now turn the wheel to its center position
and press two buttons + at the same time to calibrate the wheel center.
2
S…
1 3
1 Press tuning button
2 Turn the steering wheel to the center position
3 Press the two buttons + at the same time
SHIFTER CALIBRATION
To enter shifter calibration mode, simultaneously press the two buttons + ,
highlighted below. For the detailed process read shifter manual.
5
TUNING OPTIONS
To enter tuning menu press button . To navigate inside the menu, use the
directional stick: · Press directional stick up or down to access 5 setups ·
Press directional stick right or left to go through the op-
tions and press or hold it up or down to change option values
MODES
The CSL Elite Racing Wheel will start in “PlayStation®4 Mode” by default when the CSL Elite Racing Wheel (H) is attached to the CSL Elite Wheel Base (A). To switch to other modes press the `Mode’ button once. The LED above the ” ” button will indicate the current operation mode:
Blue indicates “PlayStation®4 mode”
Red indicates “PC mode”*
Purple indicates “ClubSport Wheel Base V2 Compatibility Mode”
- PC compatibility not tested nor endorsed by Sony Interactive Entertainment LLC.
LED Mode
Manufactured by
Fanatec® is a registered trademark of Endor AG Designed and developed by Endor
AG in Germany E.ON-Allee 3 – 84036 Landshut – Germany US/CAN Telephone: +1
866-292-6226 Email:
info.webshop@fanatec.com Internet: www.fanatec.com – www.endor.ag Manufactured
& distributed under license by Sony Interactive Entertainment LLC.
6
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>