Soundcore Liberty Air 2 Pro User Guide
- June 6, 2024
- Soundcore
Table of Contents
Soundcore Liberty Air 2 Pro User Guide
SUPPORT
For FAQs, detailed user manual and more information, please visit
www.soundcore.com/support
APP
Download the Soundcore App to customize the user interface (e.g. adjust
volume, control playback, activate Siri), trace HearID, adjust EQ, switch ANC
modes, update firmware, and explore more.
FIRMWARE UPGRADE
Ensure the earbuds are placed in the charging case and the case remains open
until the firmware upgrade is completed.
AMBIENT SOUND
Switch ANC/Transparency/Normal modes in the Soundcore App.
- ANC (Active Noise Cancellation): Reduce unwanted background noise.
- Transparency: Stay aware of surroundings while listening to music.
WEARING
Choose the Liquid Silicone EarTips that fit your ears best.
CHARGING
Warning!
- Fully dry off the earbuds and the USB-C charging port before charging.
- Use a certified USB-C charging cable to prevent any damage.
- For wireless charging, position the charging case at the center of your wireless charger.
POWERING ON/OFF
Open the charging case, the earbuds will automatically power on. To power off, place the earbuds into the charging case and close the case.
PAIRING
Open the charging case, the earbuds will automatically enter the Bluetooth pairing mode. Select “Soundcore Liberty Air 2 Pro” on your device’s Bluetooth list to connect.
CONTROLS
x2: Tap twice
2s: Press and hold for 2 seconds
Auto-pause music playback when removing the earbuds, wear them again to
resume.
RE-PAIRING
Pairing with another device: Place the earbuds in the charging case and leave the case open. Press and hold the button on the case for 3 seconds until the earbud LED indicators flash white to enter pairing mode.
RESET
- Reset if the earbuds cannot properly pair with each other or with other devices.
- Place the earbuds in the charging case and leave the case open.
- Press and hold the button on the case for 10 seconds until the earbud LED indicators flash red 3 times and then turn white.
- Wait until the LED indicator on one of the earbuds flashes fast while the other flashes slowly. This confirms that the reset was successful and your earbuds can be connected normally.
LED LIGHT GUIDE
- Steady white
- Flashing white
- Flashing red
Customer Service
[email protected]
[email protected] (For Middle East and
Africa Only)
[email protected]
+971 8000320817 (UAE) Sun-Thu 9:00 – 17:30 (GMT+4)
+971 42463266 (Middle East & Africa) Sun-Thu 9:00 – 17:30 (GMT+4)
+966 8008500030 (KSA) Sun-Thu 8:00 – 16:30 (GMT+3)
+965 22069086 (Kuwait) Sun-Thu 8:00 – 16:30 (GMT+3)
+20 8000000826 (Egypt) Sun-Thu 7:00 – 15:30 (GMT+2)
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong
ANKER TECHNOLOGY (UK) LTD
Suite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham, B11 2AA, United
Kingdom
Anker Innovations Deutschland GmbH
Georg-Muche-Strasse 3-5, 80807 Munich, Germany
References
- soundcore Headphones & Speakers - Hear it, Feel it - soundcore US
- Anker (アンカー) Japan 公式オンラインストア – Anker Japan 公式オンラインストア
- Soundcore EN