Donerton C5S Stereo Wireless Earbuds User Manual

brief introduction

Thank you for purchasing the C5 wireless earbuds ! The C5 use of the newest technology supports all functions by touch control and has exceptional audio quality. The C5 focuses on improving and enhancing user experience by providing a comfortable fit and ergonomic in-ear design. It is designed to fit the auricle perfectly so that the user is free from pressure and distending pain during prolonged use. With the Portable and Wireless Magsafe charging, you can enjoy charging anytime and anywhere. For the best user experience, please read this manual carefully before initial use of the C5 earbuds safety Rules

1. For safety, please comply with the rules mentioned in this manual
2. Keep the device away from sharp edges, uneven surfaces, metal objects, and knockout.
3. Do not open, dismantle or attempt to repair the earbuds. Doing so may cause accidental fire, electronic board failure, or damage to the earbuds.  All warranties will be canceled.
4. Do not wipe or clean the earbuds with oils or any volatile liquids.
5.  Do not use the earbuds in places where potential personal safety is at risk or in danger.

Packing details

Product Information

① charging storage box
② cavity
③ battery display
④ charging display| ⑤ microphone
⑥ silicone ear cap
⑦ silicone plug
⑧ headphone work indicator
---|---

Quick Start Guide

1.  Headphone wearing method R/L is printed on the earphone case, please wear it in the correct direction, the sound quality will be better!

2. Connect to Phone:
   A. Take the earbuds out of the charging case and remove the PET insulator.
   Put the earbuds back in the charging case to activate. The earbuds will now power on automatically once you take them out of case
   B. Put the L and R earbuds into your ears. The L and R earbud will find each other and pair. Next, the tone” connected will be heard C. When the two earbuds successfully pair, the tone”Left channel, Right channel” will be heard Activate Bluetooth on your phone. On the device list, connect to the”Touch Two C5and then the tone second device connected will be heard
   D. How to use the single ear: Take out the single earbuds from the charging box to enter the red and blue lights alternately which is the connection succeeded. If the Bluetooth device name is not found, touch the surface twice to search and connect
   ATTENTION :
   PARING TO THE PHONE IS ONLY REQUIRED FOR THE FIRST TIME YOU CONNECT. AFTER THE FIRST TIME THE EARBUDS WILLAUTOMATI CALLY CONNECT TO YOUR PHONE WHEN YOU REMOVE THEM FROM THE CASE

3. Touch Functions: (Note : Left and the right device can be operated)
   Activate voice assistant: Continuously click the touch panel three times
   ( Note: in standby mode ）
   Call function: Click once on the touch surface to answer or hang up the phone.
   Reject the call: Double click on the touch surface
   Play or pause music: Click once on the touch area
   ATTENTION:
   PLEASE REMOVE THE PROTECTIVE COVER ON THE EARBUDS BEFORE OPERATION. PLEASE KEEP AWAY FROM RADIO INTERFERENCE AND AVOID NOISY ENVIRONMENTS WHEN USING EABUDS PLEASE REPLAY THE HIGH-QUALITY FORMAT OF MUSIC OR LOCAL MUSIC OF THE DEVICE

4.  Charging Case
   A. Put the earbuds into the case exactly, the battery box will automatically charge the earphones until they are full.
   B. The charging box has a smart switch function. Place the earbuds in the charging box and cover the case which is charged. When the charging box is opened, the charging will be turned off automatically. The earphone will startupper and connect back to the mobile phone when you pick up the earbuds from the open box. Then you can listen to music and enjoy the intelligence of this product.
   C. USB outlet supports 5V/1.5A output, which can provide emergency charging for mobile phones and other electronic products
   ATTENTION:
   REMOVE THE INSULATION COVER BEFORE INITIAL USE. RECHARGE THE CHARGING CASE IF NOT USED FOR OVER 90 DAYS. ONLY USE GOOD QUALITY WIRELESS CHARGING TRANSMITTER AND CHARGING CABLE.
   THE EARBUD LED LIGHT WILL TURN BLUE WHEN IT IS FULLY CHARGED

5. Single Earbud Mode:
   The L/R Earbud can use alone to connect to your Phone. On your phone, enter the Bluetooth device connection list and remove the”Touch Two C5 ” from the list. Redo the steps for Connect to Phone”but with only the L/R earbud.

Product Parameter

1.  Earbud parameters:
   Bluetooth Version: 5.0
   Operation Voltage: 3.2V-4 2V
   Impedance: 32Ω
   Speaker sensitivity: 105db
   Speaker Bandwidth: 20-20 kHz
   Microphone Sensitivity: -42+-2db
   Earbud frequency: 2. 4-2.48GHZ
   Compatible : A2DP/HFP/HSP/AVRCPEarbud
   working range: 10M
   Single eartalk time: 6hrs
   Music play: 4-5hrs
   Single earbud standby time: 80 hrs

2. Charging case Parameters:
   Large capacity battery
   DC Charging Voltage: DC5V
   DC charge Current: 1A
   DC output Current: Maximum 1. 5A

Troubleshooting Guide

headphones are in place
Headset
Automatic shut-down| Low battery| Charge the headset
Headphones have echo| The volume is too high or
the environment is too noisy| volume adjustment Or change places
The call has a noise| Caused by environmental interference or Sound source equipment is far away| Change place or will The distance of the source device is close
The other party’s voice is small| The headset is not worn correctly| Adjust the position of the headset And adjust the volume
Bad signal, Intermittent| Too far or outside interference| Put the phone closer to the main earbud or keep from the outer interference signal

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>