Odec OD-E1 True Wireless Earbuds User Manual

User Manual
True Wireless Earbuds
Model: OD-E1

Thank you for purchasing the Odec OD-E1 True Wireless Earbuds. Please read this user manual carefully and keep it for future reference. If you need any assistance, please contact our support team with your product model number and Amazon order number.

Package Contents

True Wireless Earbuds
Charging Case
USB-A to C Cable
User Manual
Warranty Card

Product Diagram

Specifications

Earbuds

Charging Case

Getting Started

Charging
Fully charge the charging case before first use. To charge, connect the case to a USB charger or charging port with the included USB-C cable. When the LED charging indicator turns 100, the case is fully charged. Charging takes around 2 hours, and after being fully charged, the case can fully charge the earbuds 5 times. The earbuds should be stored in the case when not in use. When the earbuds are charging in the case (with the case itself not charging), the LED indicators on the earbuds will turn solid red. When the indicators turn off, the earbuds are fully charged.

Pairing
Starting with the earbuds in the case:

1. Take the left and right earbuds out of the case. They will turn on automatically and connect with each other within 5 seconds

2. After the earbuds have connected successfully, the LED indicators on the
   earbuds will flash blue and red. This indicates they are ready to pair

3. Turn on the pairing function on the device you want to pair with the earbuds

4. From the list of available devices, find and select “OD-E1”

5. If a code or PIN is required for pairing, enter “0000”

Regular Use After Pairing
Once the earbuds are successfully paired with your device, they can be switched on and off as follows:

• Take the earbuds out from the charging case and they will turn on automatically
• To power off, put the earbuds back into the charging case and they will begin charging

Using the Left/Right Earbud Only
Starting with the earbuds in the case:

1. Take the left/right earbud out
2. Turn on the pairing function on the device you want to pair with the earbud
3. From the list of available devices, find and select “OD-E1”

Notes

• When you turn on the earbuds, they will automatically reconnect to the last-paired device or enter pairing mode if no paired device is found To clear the pairing list, remove  both earbuds from the charging case, tap and hold the touch-sensitive panel on both earbuds for 10 seconds In pairing mode, the earbuds will automatically turn off after 5 minutes if no devices are paired
• If one of the earbuds has no sound output, put both earbuds back into the charging case and take them out again
• The maximum wireless operating range is 10m (33ft). If you exceed this range, the earbuds will disconnect from your paired device. The connection will be re-established if  you re-enter the wireless range within 5 minutes. The earbuds will automatically reconnect to the last-paired device. To connect with other devices, refer the previous pairing steps

Controls & LED Indicators

Streaming Audio
Once paired, you can wirelessly stream audio from your device to the earbuds. Music will automatically pause when you receive an incoming phone call and resume once the call has ended.

Taking Calls

Answer or end a call| Double-tap either earbud to answer or end a call. If there’s a second incoming call, double-tap to answer the second call and put the first call on hold; or long-press for 2 seconds to reject the second call
---|---
Reject an incoming call| Long-press either earbud for 2 seconds
Use Sid or other voice assistants| While your device is connected, triple-tap either earbud
LED Status Indicator (Earbuds)| Status
Flashing blue and red| Pairing mode
Flashing Blue| Reconnecting
Solid red| Charging
Off (after charging)| Fully charged

FAQ

The earbuds are on, but not connecting to my device
For the earbuds and your device to establish a connection, you need to put them both in pairing mode. Please follow the instructions in the Pairing section of this manual.
I’ve connected the earbuds with my smartphone but can’t hear any sound
Double-check the volume level on your smartphone and the earbuds. Some smartphones require you to set up the earbuds as an audio output device before the audio can be  transmitted. If you’re using a music player or other device, please make sure it supports the A2DP profile.
The sound isn’t very clear or the caller can’t hear my voice clearly
Adjust the volume on your smartphone and the earbuds. Try moving closer to your smartphone to rule out the possibility of interference or wireless range- related issues.

What’s the wireless range of the earbuds?
The maximum range is 10m (33ft). However, the actual range depends on environmental factors. For optimal performance, keep your device connected within a range of  roughly 4m to 8m and make sure that there are no major obstacles (like reinforced steel walls) between the earbuds and your device.
The earbuds won’t turn on
Try charging the earbuds for a while. If the earbuds still won’t power on, please contact our support team at the email address given in Warranty & Customer Support.
I put the earbuds back in the charging case, but the earbuds are still connected
In this case, the charging case is likely to be out of power. You will need to charge the case.

Product Care & Use

• Keep away from liquids and extreme heat
• Don’t use the earbuds at high volume for extended periods, as this may cause permanent hearing damage or loss

Warranty & Customer Support

For questions, support, or warranty claims, contact us at the address below that corresponds with your region. Please include your Amazon order number and product model  number.
Amazon US orders: odecservice@outlook.com
Amazon EU orders: odeceuservice@hotmail.com
Amazon CA orders: odeccaservice@outlook.com
*Please note, Odec can only provide after sales service for products purchased directly from Odec. If you have purchased from a different seller, please contact them directly for service or warranty issues.

CE Statement

Max RF power level:
BT classic (2402–2480MHz): 2.1dBm
RF exposure assessment has been performed to prove that this unit will not generate the harmful EM emission above the reference level as specified in EC Council  Recommendation (1999/519/EC).
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
Excessive sound pressure from earphones and headphones can cause hearing loss.

Hereby, our company declares that the radio equipment type (True Wireless
Earbuds, OD-E1) is in compliance with Directive 2014/53/EU.

Notice: This device may be used in each member state of the EU.

Changchun Chengji Technology Co., LTD.
www.odecdirect.com | odecservice@outlook.com
RM 601, 6/F, Building D, No. 155, Jinhe Street,
Gaoxin District, Changchun, Jilin, 130000, P.R. China
FCC ID: 2APQ3-OD-E1

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>